From: Christophe Leroy Date: Thu, 15 Sep 2022 06:54:59 +0000 (+0200) Subject: board: MCR3000: Remove update of non-existing e1-wan DT node X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=19a68636b40d12dd73b92adc13bc3d8fdd53c03c;p=u-boot.git board: MCR3000: Remove update of non-existing e1-wan DT node e1-wan device-tree node doesn't exist. Remove related update to avoid following warning at startup: Loading Device Tree to 007fa000, end 007ff951 ... OK Unable to update property /localbus/e1-wan:data-rate, err=FDT_ERR_NOTFOUND Unable to update property /localbus/e1-wan:channel-phase, err=FDT_ERR_NOTFOUND Unable to update property /localbus/e1-wan:rising-edge-sync-pulse, err=FDT_ERR_NOTFOUND Signed-off-by: Christophe Leroy Reviewed-by: FRANJOU Stephane --- diff --git a/board/cssi/mcr3000/mcr3000.c b/board/cssi/mcr3000/mcr3000.c index e95e04a30a..7b3ab12bd5 100644 --- a/board/cssi/mcr3000/mcr3000.c +++ b/board/cssi/mcr3000/mcr3000.c @@ -58,8 +58,6 @@ static const uint cs1_dram_table_66[] = { int ft_board_setup(void *blob, struct bd_info *bd) { - const char *sync = "receive"; - ft_cpu_setup(blob, bd); /* BRG */ @@ -72,16 +70,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) /* Bus Frequency for CPM */ do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1); - /* E1 interface - Set data rate */ - do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1); - - /* E1 interface - Set channel phase to 0 */ - do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1); - - /* E1 interface - rising edge sync pulse transmit */ - do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse", - sync, strlen(sync), 1); - return 0; }