From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 5 Apr 2006 21:55:15 +0000 (+0200)
Subject: Merge with /home/sr/git/u-boot/4xx-sdram
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=197b049b8b8a488384f351b988dd15f78830ba4e;p=u-boot.git

Merge with /home/sr/git/u-boot/4xx-sdram
---

197b049b8b8a488384f351b988dd15f78830ba4e
diff --cc CHANGELOG
index 271f0fb741,c8d4e42067..59f12b8afb
--- a/CHANGELOG
+++ b/CHANGELOG
@@@ -2,28 -2,24 +2,46 @@@
  Changes since U-Boot 1.1.4:
  ======================================================================
  
+ * Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+ 
+   405 SDRAM: - The SDRAM parameters can now be defined in the board
+                config file and the 405 SDRAM controller values will
+                be calculated upon bootup (see PPChameleonEVB).
+                When those settings are not defined in the board
+                config file, the register setup will be as it is now,
+                so this implementation should not break any current
+                design using this code.
+ 
+                Thanks to Andrea Marson from DAVE for this patch.
+ 
+   440 DDR:   - Added function sdram_tr1_set to auto calculate the
+                TR1 value for the DDR.
+              - Added ECC support (see p3p440).
+ 
+   Patch by Stefan Roese, 17 Mar 2006
+ 
 +* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
 +  Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
 +
 +* Add support for ymodem protocol download
 +  Patch by Stefano Babic, 29 Mar 2006
 +
 +* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
 +  Merge from Markus Klotzbücher's repo, 01 Apr 2006
 +
 +* GCC-4.x fixes: clean up global data pointer initialization for all
 +  boards
 +
 +* Update for Delta board:
 +  - redundant NAND environment
 +  - misc Monahans cleanups (remove dead code etc.)
 +  - DA9030 Initialization; some minimal changes to PXA I2C driver to
 +    make it work with the Monahans.
 +  - Make Monahans clock frequency configurable using
 +    CFG_MONAHANS_RUN_MODE_OSC_RATIO and
 +    CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
 +  Merge from Markus Klotzbücher's repo, 25 Mar 2006
 +
  * Enable Quad UART om MCC200 board.
  
  * Cleanup MCC200 board configuration; omit non-existent stuff.