From: Bin Meng Date: Tue, 31 Mar 2015 03:25:03 +0000 (+0800) Subject: x86: Set serial port IRQ for SMSC LPC47M X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=19268834fb208a7deb43f9a00b034e0c6abab3cd;p=u-boot.git x86: Set serial port IRQ for SMSC LPC47M For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured. Signed-off-by: Jian Luo Signed-off-by: Bin Meng Acked-by: Simon Glass --- diff --git a/arch/x86/include/asm/ibmpc.h b/arch/x86/include/asm/ibmpc.h index c3b5187c22..678cde4c86 100644 --- a/arch/x86/include/asm/ibmpc.h +++ b/arch/x86/include/asm/ibmpc.h @@ -21,4 +21,7 @@ #define UART0_BASE 0x3f8 #define UART1_BASE 0x2f8 +#define UART0_IRQ 4 +#define UART1_IRQ 3 + #endif diff --git a/board/intel/crownbay/crownbay.c b/board/intel/crownbay/crownbay.c index 2a254efe3d..31bb320213 100644 --- a/board/intel/crownbay/crownbay.c +++ b/board/intel/crownbay/crownbay.c @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { - lpc47m_enable_serial(SERIAL_DEV, UART0_BASE); + lpc47m_enable_serial(SERIAL_DEV, UART0_BASE, UART0_IRQ); return 0; } diff --git a/board/intel/minnowmax/minnowmax.c b/board/intel/minnowmax/minnowmax.c index 6e82b16335..fd2070afb2 100644 --- a/board/intel/minnowmax/minnowmax.c +++ b/board/intel/minnowmax/minnowmax.c @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { - lpc47m_enable_serial(SERIAL_DEV, UART0_BASE); + lpc47m_enable_serial(SERIAL_DEV, UART0_BASE, UART0_IRQ); return 0; } diff --git a/drivers/misc/smsc_lpc47m.c b/drivers/misc/smsc_lpc47m.c index d51f8e3024..1e50d5b826 100644 --- a/drivers/misc/smsc_lpc47m.c +++ b/drivers/misc/smsc_lpc47m.c @@ -22,12 +22,13 @@ static void pnp_exit_conf_state(u16 dev) outb(0xaa, port); } -void lpc47m_enable_serial(u16 dev, u16 iobase) +void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); pnp_set_enable(dev, 0); pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + pnp_set_irq(dev, PNP_IDX_IRQ0, irq); pnp_set_enable(dev, 1); pnp_exit_conf_state(dev); } diff --git a/include/smsc_lpc47m.h b/include/smsc_lpc47m.h index bffd622f0f..32b069df6f 100644 --- a/include/smsc_lpc47m.h +++ b/include/smsc_lpc47m.h @@ -13,7 +13,8 @@ * * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number. * @iobase: Processor I/O port address to assign to this serial device. + * @irq: Processor IRQ number to assign to this serial device. */ -void lpc47m_enable_serial(u16 dev, u16 iobase); +void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq); #endif /* _SMSC_LPC47M_H_ */