From: Khoronzhuk, Ivan <ivan.khoronzhuk@ti.com>
Date: Fri, 17 Oct 2014 17:44:33 +0000 (+0300)
Subject: net: keystone_net: use mdio_reset function
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1920e905efcd528b43535e0b19f6b433d321fa76;p=u-boot.git

net: keystone_net: use mdio_reset function

Don't use mdio_enable twice while eth open. Also rename it to
keystone2_mdio_reset as more appropriate name.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---

diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index 8a45fbd88f..3f9650c6ea 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -38,7 +38,6 @@ struct rx_buff_desc net_rx_buffs = {
 	.rx_flow	= 22,
 };
 
-static void keystone2_eth_mdio_enable(void);
 static void keystone2_net_serdes_setup(void);
 
 static int gen_get_link_speed(int phy_addr);
@@ -71,7 +70,7 @@ int keystone2_eth_read_mac_addr(struct eth_device *dev)
 	return 0;
 }
 
-static void keystone2_eth_mdio_enable(void)
+static void keystone2_mdio_reset(void)
 {
 	u_int32_t	clkdiv;
 
@@ -397,7 +396,6 @@ int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
 /* Eth device open */
 static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
 {
-	u_int32_t clkdiv;
 	int link;
 	struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
 
@@ -410,9 +408,6 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
 
 	keystone2_net_serdes_setup();
 
-	if (sys_has_mdio)
-		keystone2_eth_mdio_enable();
-
 	keystone_sgmii_config(eth_priv->slave_port - 1,
 			      eth_priv->sgmii_link_type);
 
@@ -440,14 +435,7 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
 	hw_config_streaming_switch();
 
 	if (sys_has_mdio) {
-		/* Init MDIO & get link state */
-		clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
-		writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE |
-		       MDIO_CONTROL_FAULT, &adap_mdio->control)
-			;
-
-		/* We need to wait for MDIO to start */
-		udelay(1000);
+		keystone2_mdio_reset();
 
 		link = keystone_get_link_status(dev);
 		if (link == 0) {