From: Alexey Brodkin Date: Fri, 21 Mar 2014 12:57:47 +0000 (+0400) Subject: axs101: flush DMA buffer descriptors before DMA transactons starts X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=17b0da801910b2791cf67817735a3367615922e6;p=u-boot.git axs101: flush DMA buffer descriptors before DMA transactons starts CPU sets DMA buffer descriptors with data required for inetrnal DMA such as: * Ownership of BD * Buffer size * Pointer to data buffer in memory Then we need to make sure DMA engine of NAND controller gets proper data. For this we flush buffer rescriptor. Then we're ready for DMA transaction. Signed-off-by: Alexey Brodkin Cc: Vineet Gupta Cc: Tom Rini --- diff --git a/board/synopsys/axs101/nand.c b/board/synopsys/axs101/nand.c index 8672803871..c7f90c4400 100644 --- a/board/synopsys/axs101/nand.c +++ b/board/synopsys/axs101/nand.c @@ -107,6 +107,10 @@ static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf, writel(bbstate.bounce_buffer, &bd->buffer_ptr0); writel(0, &bd->buffer_ptr1); + /* Flush modified buffer descriptor */ + flush_dcache_range((unsigned long)bd, + (unsigned long)bd + sizeof(struct nand_bd)); + /* Issue "write" command */ NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1)); @@ -137,6 +141,10 @@ static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) writel(bbstate.bounce_buffer, &bd->buffer_ptr0); writel(0, &bd->buffer_ptr1); + /* Flush modified buffer descriptor */ + flush_dcache_range((unsigned long)bd, + (unsigned long)bd + sizeof(struct nand_bd)); + /* Issue "read" command */ NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1));