From: Mans Rullgard Date: Tue, 3 Sep 2019 14:16:50 +0000 (+0200) Subject: spl: mmc: Add option to set eMMC HW boot partition X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=17241ea0543a4c998f79bde27b8a6047c8d84d0a;p=u-boot.git spl: mmc: Add option to set eMMC HW boot partition This change allows setting pre-defined eMMC boot partition for SPL eMMC booting. It is necessary in the case when one wants to boot (through falcon boot) from eMMC after loading SPL from other memory (like SPI-NOR). Signed-off-by: Mans Rullgard [lukma: Edit the commit message] Signed-off-by: Lukasz Majewski Acked-by: Andreas Dannenberg --- diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 282d246ea3..7862a0128c 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -325,6 +325,12 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR Address on the MMC to load U-Boot from, when the MMC is being used in raw mode. Units: MMC sectors (1 sector = 512 bytes). +config SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION + int "Number of the eMMC boot partition to use" + default 1 + help + eMMC boot partition number to use when the eMMC in raw mode. + config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION bool "MMC Raw mode: by partition" help diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index fa19aa76b3..c5cae97099 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -355,6 +355,9 @@ int spl_mmc_load(struct spl_image_info *spl_image, err = -EINVAL; switch (boot_mode) { case MMCSD_MODE_EMMCBOOT: +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION + part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION; +#else /* * We need to check what the partition is configured to. * 1 and 2 match up to boot0 / boot1 and 7 is user data @@ -364,6 +367,7 @@ int spl_mmc_load(struct spl_image_info *spl_image, if (part == 7) part = 0; +#endif if (CONFIG_IS_ENABLED(MMC_TINY)) err = mmc_switch_part(mmc, part);