From: Uwe Kleine-König Date: Mon, 28 Oct 2024 19:00:31 +0000 (+0100) Subject: arm64: dts: rockchip: Simplify network PHY connection on qnap-ts433 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=16e78f2a649abd6b202ec40a44879bf3fac34d10;p=u-boot.git arm64: dts: rockchip: Simplify network PHY connection on qnap-ts433 While it requires to have the right phy driver loaded (i.e. motorcomm) to make the phy asserting the right delays, this is generally the preferred way to define the MAC <-> PHY connection. Signed-off-by: Uwe Kleine-König Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240304084612.711678-2-ukleinek@debian.org Signed-off-by: Heiko Stuebner [ upstream commit: e8d45544f806f3b55c30345de84262cbb9504902 ] (cherry picked from commit e0bbe061fd537bd7b113c53eb046bbcbf0e6597d) Reviewed-by: Kever Yang --- diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index 6c4269b3d9..20e4fa6c18 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -198,15 +198,13 @@ assigned-clock-rates = <0>, <125000000>; clock_in_out = "output"; phy-handle = <&rgmii_phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&gmac0_miim &gmac0_tx_bus2 &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; - rx_delay = <0x2f>; - tx_delay = <0x3c>; status = "okay"; };