From: Prabhakar Kushwaha <prabhakar@freescale.com>
Date: Mon, 21 Apr 2014 05:16:59 +0000 (+0530)
Subject: powerpc/mpc85xx: Remove QE firmware copy from NAND
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=169ee57138ece39e126c54901e5c7b71c1321719;p=u-boot.git

powerpc/mpc85xx: Remove QE firmware copy from NAND

qe_init() does not use data copied from NAND. Thise code is not tested or
complied causing compilation error during NAND boot

So, remove QE firmware copy from NAND to ddr.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 867abb6cf7..a2b79cc7cc 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -899,19 +899,6 @@ void cpu_secondary_init_r(void)
 #endif
 
 #ifdef CONFIG_QE
-#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
-	int ret;
-	size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
-
-	/* load QE firmware from NAND flash to DDR first */
-	ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
-			&fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
-
-	if (ret && ret == -EUCLEAN) {
-		printf ("NAND read for QE firmware at offset %x failed %d\n",
-				CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
-	}
-#endif
 	qe_init(qe_base);
 	qe_reset();
 #endif