From: Wolfgang Denk Date: Fri, 4 Oct 2013 15:43:26 +0000 (+0200) Subject: Coding Style cleanup: drop some excessive empty lines X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=16641d52fc70f67aa083c5ebffc526ee8e46bf35;p=u-boot.git Coding Style cleanup: drop some excessive empty lines Signed-off-by: Wolfgang Denk --- diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 7a7caded03..764620d62a 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -526,8 +526,6 @@ struct prcm_regs const omap5_es2_prcm = { .cm1_abe_timer8_clkctrl = 0x4a004580, .cm1_abe_wdt3_clkctrl = 0x4a004588, - - /* cm2.ckgen */ .cm_clksel_mpu_m3_iss_root = 0x4a008100, .cm_clksel_usb_60mhz = 0x4a008104, diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX index fe3c0f1528..aa41ff8fd2 100644 --- a/board/LEOX/elpt860/README.LEOX +++ b/board/LEOX/elpt860/README.LEOX @@ -46,7 +46,6 @@ U-Boot, at the address of 0x03000000. ============================================================================= - ################################################## # Operation on the serial console (SMC1) ############################## diff --git a/board/palmtreo680/README b/board/palmtreo680/README index 46828eb84f..c8799c6ab1 100644 --- a/board/palmtreo680/README +++ b/board/palmtreo680/README @@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love to hear from you if you succeed. - Details on the SPL ================== @@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the remainder of u-boot and jumps to it. - The docg4's "reliable mode" =========================== @@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does read in reliable mode, in the same fashion as the IPL. - Details on the IPL and its data format ====================================== @@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation of the IPL, and expects the image to be stored in the same format. - Instructions on Programming u-boot to flash =========================================== @@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the flash using Linux running on the Treo. - Hardware Prerequisites ====================== @@ -136,7 +131,6 @@ A Linux desktop PC. to flash, you'll really want to use a Linux PC. - Treo-side Software Prerequisites ================================ @@ -152,7 +146,6 @@ Linux bootloader for PalmOS: parameters passed to the kernel. - Linux kernel: The kernel on the Treo 680 is still a little rough around the edges, and the @@ -200,7 +193,6 @@ Linux kernel: and /dev/mtd2 for these partitions, respectively. Ensure that your root file system at least has /dev/mtd1 if you are not running udev or mdev. - Userspace Utilities: In addition to everything necessary to provide a useful userspace environment @@ -221,19 +213,16 @@ Userspace Utilities: from the mtd-utils package. - Desktop PC-side Software Prerequisites ====================================== Terminal emulator application: minicom, kermit, etc. - Linux kernel: Compiled with CONFIG_USB_SERIAL enabled. Build this as a module. - Recommended (Not directly related to u-boot) ============================================ @@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when mounting to avoid the need to run a portmapper like rpcbind. - Preliminaries ============= @@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card. If all of the above went well, you can now program u-boot. - Programming u-boot ================== @@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000. Shutdown linux, remove and re-insert the battery, hold your breath... - Enjoying u-boot =============== @@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be corrected soon. - Customizing =========== @@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this should be straightforward. - Restoring PalmOS ================ @@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1 dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1 modprobe -r docg4 - TODO ==== diff --git a/board/sandpoint/README b/board/sandpoint/README index a2e0831f33..c9996a8c06 100644 --- a/board/sandpoint/README +++ b/board/sandpoint/README @@ -15,8 +15,6 @@ tkoeller@gmx.net. Thomas Koeller - - The port was tested on a Sandpoint 8240 X3 board, with U-Boot installed in the flash memory of the CPU card. Please use the following DIP switch settings: diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index f2b0476817..5de8fc6cbf 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -328,8 +328,6 @@ static int get_clk(struct dpll_regs *dpll_regs) return f; }; - - int clk_get(int clk) { return get_clk(&dpll_lcd_regs); @@ -426,7 +424,5 @@ static int board_video_init(void) return 0; } - - #endif /* ifdef CONFIG_VIDEO */ #include "../common/board.c" diff --git a/doc/README.gpt b/doc/README.gpt index 81dfe584c5..5c133f3321 100644 --- a/doc/README.gpt +++ b/doc/README.gpt @@ -6,7 +6,6 @@ # # SPDX-License-Identifier: GPL-2.0+ - Glossary: ======== - UUID -(Universally Unique Identifier) @@ -22,7 +21,6 @@ Introduction: This document describes the GPT partition table format and usage of the gpt command in u-boot. - UUID introduction: ==================== @@ -78,7 +76,6 @@ GPT brief explanation: LBA -1 |Secondary GPT Header | ---------------------------------------------------------- - For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called "protective MBR". Its first partition entry ID has 0xEE value, and disk software, which is not @@ -114,7 +111,6 @@ Offset Size Description TOTAL: 512 B - IMPORTANT: GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). @@ -132,7 +128,6 @@ sizeof(partition_entry_size (usually 128))) Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect of the Primary. - Partition Entry Format: ---------------------- Offset Size Description @@ -150,7 +145,6 @@ of the Primary. Bit 62 - Hidden Bit 63 - Not mount - Creating GPT partitions in U-Boot: ============== @@ -171,7 +165,6 @@ To restore GUID partition table one needs to: 2. From u-boot prompt type: gpt write mmc 0 $partitions - Useful info: ============ diff --git a/doc/README.p1010rdb b/doc/README.p1010rdb index dee63d713a..6b2b5ff3fb 100644 --- a/doc/README.p1010rdb +++ b/doc/README.p1010rdb @@ -185,7 +185,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz): => reset - Boot Linux from network using TFTP on P1010RDB ============================================== Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. diff --git a/doc/README.qemu-mips b/doc/README.qemu-mips index 1fdfbab677..a192752f4d 100644 --- a/doc/README.qemu-mips +++ b/doc/README.qemu-mips @@ -15,7 +15,6 @@ recent qemu versions. When using emulated flash, launch with -pflash and erase mips_bios.bin. - Notes for the Qemu MIPS port ---------------------------- diff --git a/doc/driver-model/UDM-block.txt b/doc/driver-model/UDM-block.txt index b42ec69c94..ffbbdf3a7a 100644 --- a/doc/driver-model/UDM-block.txt +++ b/doc/driver-model/UDM-block.txt @@ -218,7 +218,6 @@ II) Approach in near future. - III) Analysis of in-tree drivers -------------------------------- diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index b34068a0bb..6ecdea3e14 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -9,7 +9,6 @@ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause */ - /* * The Mass Storage Function acts as a USB Mass Storage device, * appearing to the host as a disk drive or as a CD-ROM drive. In @@ -153,7 +152,6 @@ * . */ - /* * Driver Design * @@ -264,7 +262,6 @@ static const char fsg_string_interface[] = "Mass Storage"; - #define FSG_NO_INTR_EP 1 #define FSG_NO_DEVICE_STRINGS 1 #define FSG_NO_OTG 1 @@ -2629,8 +2626,6 @@ usb_copy_descriptors(struct usb_descriptor_header **src) return ret; } - - static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index 9fa6b77ab1..5e228f3556 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -30,7 +30,6 @@ #define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_FSL_TBCLK_EXTRA_DIV 100 - /* * DDR Setup */ @@ -76,7 +75,6 @@ #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 - /* I2C */ #define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ #define CONFIG_SYS_FSL_I2C2_SPEED 4000000 @@ -104,8 +102,6 @@ #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - - #define CONFIG_BOOTDELAY 0 /* diff --git a/tools/buildman/README b/tools/buildman/README index f63f278673..090b653116 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -677,7 +677,6 @@ the build speed by building all commits for a board instead of the other way around. - Simon Glass sjg@chromium.org Halloween 2012