From: Bartosz Golaszewski Date: Thu, 1 Dec 2016 11:07:43 +0000 (+0100) Subject: davinci: omapl138_lcdk: increase PLL0 frequency X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1601dd97edc6;p=u-boot.git davinci: omapl138_lcdk: increase PLL0 frequency The LCDC controller on the lcdk board has high memory throughput requirements. Even with the kernel-side tweaks to master peripheral and peripheral bus burst priorities, the default PLL0 frquency of 300 MHz is not enough to service the LCD controller and causes DMA FIFO underflows. Increment the PLL0 multiplier to 37, resulting in PLL0 frequency of 456 MHz - the same value that downstream reference u-boot from Texas Instruments uses. Signed-off-by: Bartosz Golaszewski Reviewed-by: Tom Rini --- diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 9e11f7dc95..7c2f4141c9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -75,7 +75,7 @@ #define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 #define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLM 24 +#define CONFIG_SYS_DA850_PLL0_PLLM 37 #define CONFIG_SYS_DA850_PLL1_PLLM 21 /*