From: Adam Ford Date: Fri, 4 Dec 2020 23:27:46 +0000 (-0600) Subject: arm: dts: imx8mm: sync dts from Linux Kernel 5.10-rc6 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=15d79fcac09fee7d27ff0a0c36389433507ce3bd;p=u-boot.git arm: dts: imx8mm: sync dts from Linux Kernel 5.10-rc6 There have been some updates to the device tree since 5.6. This also includes some clocks, and makes it easier to keep board device tree files in sync with Linux Signed-off-by: Adam Ford Acked-by: Peng Fan --- diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi index 1e5e11592f..05ee062548 100644 --- a/arch/arm/dts/imx8mm.dtsi +++ b/arch/arm/dts/imx8mm.dtsi @@ -18,10 +18,18 @@ aliases { ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -29,14 +37,6 @@ spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; }; cpus { @@ -68,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -80,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -92,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -104,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -125,7 +129,7 @@ opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <900000>; + opp-microvolt = <950000>; opp-supported-hw = <0xc>, <0x7>; clock-latency-ns = <150000>; opp-suspend; @@ -204,6 +208,38 @@ arm,no-tick-in-suspend; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -227,12 +263,14 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; sai1: sai@30010000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30010000 0x10000>; interrupts = ; @@ -246,6 +284,7 @@ }; sai2: sai@30020000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30020000 0x10000>; interrupts = ; @@ -273,6 +312,7 @@ }; sai5: sai@30050000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30050000 0x10000>; interrupts = ; @@ -286,6 +326,7 @@ }; sai6: sai@30060000 { + #sound-dai-cells = <0>; compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; reg = <0x30060000 0x10000>; interrupts = ; @@ -363,6 +404,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -419,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; @@ -455,6 +503,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = ; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = ; wakeup-source; status = "disabled"; @@ -469,16 +519,20 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; - assigned-clocks = <&clk IMX8MM_CLK_NOC>, + assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>, + <&clk IMX8MM_CLK_A53_CORE>, + <&clk IMX8MM_CLK_NOC>, <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, <&clk IMX8MM_VIDEO_PLL1>, <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, + <&clk IMX8MM_ARM_PLL_OUT>, + <&clk IMX8MM_SYS_PLL3_OUT>, <&clk IMX8MM_SYS_PLL1_800M>; - assigned-clock-rates = <0>, + assigned-clock-rates = <0>, <0>, <0>, <400000000>, <400000000>, <750000000>, @@ -496,7 +550,8 @@ }; aips2: bus@30400000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -555,10 +610,12 @@ }; aips3: bus@30800000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x8000000 0x8000000 0x10000000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -718,6 +775,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; @@ -760,6 +825,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = ; + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, + <&clk IMX8MM_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -776,7 +854,8 @@ reg = <0x30be0000 0x10000>; interrupts = , , - ; + , + ; clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET_TIMER>, @@ -800,7 +879,8 @@ }; aips4: bus@32c00000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -896,7 +976,6 @@ ddr-pmu@3d800000 { compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; - interrupt-parent = <&gic>; interrupts = ; }; };