From: Stefan Roese Date: Mon, 16 Nov 2020 17:02:30 +0000 (+0100) Subject: net: e1000: Add missing address translations X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=14807449a4a04fa478c5aba2142b6c157cfcfe4b;p=u-boot.git net: e1000: Add missing address translations Add some missing address translations from virtual address in local DRAM to physical address, which is needed for the DMA transactions to work correctly. This issue was detected while testing the e1000 driver on the MIPS Octeon III platform, which needs address translation. Signed-off-by: Stefan Roese Cc: Joe Hershberger Cc: Aaron Williams Cc: Chandrakala Chavva --- diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 6d6bf8c827..694114eca7 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -5141,7 +5141,7 @@ fill_rx(struct e1000_hw *hw) rd = rx_base + rx_tail; rx_tail = (rx_tail + 1) % 8; memset(rd, 0, 16); - rd->buffer_addr = cpu_to_le64((unsigned long)packet); + rd->buffer_addr = cpu_to_le64(virt_to_phys(packet)); /* * Make sure there are no stale data in WB over this area, which @@ -5172,8 +5172,8 @@ e1000_configure_tx(struct e1000_hw *hw) unsigned long tipg, tarc; uint32_t ipgr1, ipgr2; - E1000_WRITE_REG(hw, TDBAL, lower_32_bits((unsigned long)tx_base)); - E1000_WRITE_REG(hw, TDBAH, upper_32_bits((unsigned long)tx_base)); + E1000_WRITE_REG(hw, TDBAL, lower_32_bits(virt_to_phys(tx_base))); + E1000_WRITE_REG(hw, TDBAH, upper_32_bits(virt_to_phys(tx_base))); E1000_WRITE_REG(hw, TDLEN, 128); @@ -5317,8 +5317,8 @@ e1000_configure_rx(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* Setup the Base and Length of the Rx Descriptor Ring */ - E1000_WRITE_REG(hw, RDBAL, lower_32_bits((unsigned long)rx_base)); - E1000_WRITE_REG(hw, RDBAH, upper_32_bits((unsigned long)rx_base)); + E1000_WRITE_REG(hw, RDBAL, lower_32_bits(virt_to_phys(rx_base))); + E1000_WRITE_REG(hw, RDBAH, upper_32_bits(virt_to_phys(rx_base))); E1000_WRITE_REG(hw, RDLEN, 128);