From: Camelia Groza Date: Fri, 11 Jun 2021 12:28:08 +0000 (+0300) Subject: board: freescale: t208xrdb: add a config option for rev D dts fixups X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=13ea307f799ba76164354325a0c76c11b7b9c494;p=u-boot.git board: freescale: t208xrdb: add a config option for rev D dts fixups Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain --- diff --git a/arch/powerpc/dts/t2080rdb.dts b/arch/powerpc/dts/t2080rdb.dts index 25f8c978c6..4de814ea8d 100644 --- a/arch/powerpc/dts/t2080rdb.dts +++ b/arch/powerpc/dts/t2080rdb.dts @@ -77,10 +77,17 @@ reg = <0x0>; }; +#ifdef CONFIG_T2080RDB_REV_D + xg_aq1202_phy4: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + }; +#else xg_aq1202_phy4: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <0x1>; }; +#endif }; }; }; diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig index 6f0b012bab..8249c5df96 100644 --- a/board/freescale/t208xrdb/Kconfig +++ b/board/freescale/t208xrdb/Kconfig @@ -9,6 +9,10 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "T208xRDB" +config T2080RDB_REV_D + bool "Support for T2080RDB revisions D and up" + default n + source "board/freescale/common/Kconfig" endif diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig new file mode 100644 index 0000000000..3b533a31ad --- /dev/null +++ b/configs/T2080RDB_revD_NAND_defconfig @@ -0,0 +1,93 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0x00201000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MEMTEST_START=0x00200000 +CONFIG_SYS_MEMTEST_END=0x00400000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x100000 +CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_MPC85xx=y +CONFIG_TARGET_T2080RDB=y +CONFIG_T2080RDB_REV_D=y +CONFIG_SYS_CUSTOM_LDSCRIPT=y +CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL" +CONFIG_BOOTDELAY=10 +CONFIG_BOARD_EARLY_INIT_R=y +# CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_MP=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" +CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)" +# CONFIG_CMD_IRQ is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_I2C=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_PHY_CORTINA=y +CONFIG_SYS_CORTINA_FW_IN_NAND=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_E1000=y +CONFIG_FMAN_ENET=y +CONFIG_MII=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_FSL=y +CONFIG_SYS_QE_FMAN_FW_IN_NAND=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_ESPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_ADDR_MAP=y +CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig new file mode 100644 index 0000000000..7b9013e5ec --- /dev/null +++ b/configs/T2080RDB_revD_SDCARD_defconfig @@ -0,0 +1,90 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0x00201000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MEMTEST_START=0x00200000 +CONFIG_SYS_MEMTEST_END=0x00400000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x100000 +CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_MPC85xx=y +CONFIG_TARGET_T2080RDB=y +CONFIG_T2080RDB_REV_D=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD" +CONFIG_BOOTDELAY=10 +CONFIG_BOARD_EARLY_INIT_R=y +# CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_MP=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" +CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)" +# CONFIG_CMD_IRQ is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_I2C=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_PHY_CORTINA=y +CONFIG_SYS_CORTINA_FW_IN_MMC=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_E1000=y +CONFIG_FMAN_ENET=y +CONFIG_MII=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_FSL=y +CONFIG_SYS_QE_FMAN_FW_IN_MMC=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_ESPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_ADDR_MAP=y +CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig new file mode 100644 index 0000000000..af85fa6cdf --- /dev/null +++ b/configs/T2080RDB_revD_SPIFLASH_defconfig @@ -0,0 +1,92 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0x00201000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MEMTEST_START=0x00200000 +CONFIG_SYS_MEMTEST_END=0x00400000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x100000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_MPC85xx=y +CONFIG_TARGET_T2080RDB=y +CONFIG_T2080RDB_REV_D=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH" +CONFIG_BOOTDELAY=10 +CONFIG_BOARD_EARLY_INIT_R=y +# CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_MP=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" +CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)" +# CONFIG_CMD_IRQ is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_I2C=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_PHY_CORTINA=y +CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_E1000=y +CONFIG_FMAN_ENET=y +CONFIG_MII=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_FSL=y +CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_ESPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_ADDR_MAP=y +CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig new file mode 100644 index 0000000000..79397ab30a --- /dev/null +++ b/configs/T2080RDB_revD_defconfig @@ -0,0 +1,77 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xEFF40000 +CONFIG_SYS_MEMTEST_START=0x00200000 +CONFIG_SYS_MEMTEST_END=0x00400000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_MPC85xx=y +CONFIG_TARGET_T2080RDB=y +CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_T2080RDB_REV_D=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_MP=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" +CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)" +# CONFIG_CMD_IRQ is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_ENV_ADDR=0xEFF20000 +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_I2C=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_PHY_CORTINA=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_E1000=y +CONFIG_FMAN_ENET=y +CONFIG_MII=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_FSL=y +CONFIG_SYS_QE_FMAN_FW_IN_NOR=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_ESPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_ADDR_MAP=y +CONFIG_SYS_NUM_ADDR_MAP=64