From: wdenk Date: Thu, 16 Dec 2004 15:52:40 +0000 (+0000) Subject: Add support for INKA4X0 board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=138ff60c1e76fdf0fa77ee1ec7ef299f96330c59;p=u-boot.git Add support for INKA4X0 board --- diff --git a/CHANGELOG b/CHANGELOG index 01ee7846c3..f092323637 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Add support for INKA4X0 board + * Patch by Steven Scholz, 12 Dec 2004: Fix typo in AT91 memory setup. diff --git a/Makefile b/Makefile index ad3403ce8b..363ca5ec10 100644 --- a/Makefile +++ b/Makefile @@ -258,6 +258,9 @@ icecube_5100_config: unconfig } @./mkconfig -a IceCube ppc mpc5xxx icecube +inka4x0_config: unconfig + @./mkconfig inka4x0 ppc mpc5xxx inka4x0 + PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \ diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile new file mode 100644 index 0000000000..bf832927ce --- /dev/null +++ b/board/inka4x0/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2003-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o flash.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/inka4x0/config.mk b/board/inka4x0/config.mk new file mode 100644 index 0000000000..cb19a7daef --- /dev/null +++ b/board/inka4x0/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# INKA 4X0 board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFE00000 boot low +# +# 0x00100000 boot from RAM (for testing only) +# + +ifndef TEXT_BASE +## Standard: boot low +TEXT_BASE = 0xFFE00000 +## For testing: boot from RAM +#TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/inka4x0/flash.c b/board/inka4x0/flash.c new file mode 100644 index 0000000000..a60f4f1298 --- /dev/null +++ b/board/inka4x0/flash.c @@ -0,0 +1,432 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* + * CPU to flash interface is 8-bit, so make declaration accordingly + */ +typedef unsigned char FLASH_PORT_WIDTH; +typedef volatile unsigned char FLASH_PORT_WIDTHV; + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define FLASH_CYCLE1 0x0555 +#define FLASH_CYCLE2 0x02aa + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(FPWV *addr, flash_info_t *info); +static void flash_reset(flash_info_t *info); +static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data); +static flash_info_t *flash_get_info(ulong base); + +/*----------------------------------------------------------------------- + * flash_init() + * + * sets up flash_info and returns size of FLASH (bytes) + */ +unsigned long flash_init (void) +{ + unsigned long size = 0; + extern void flash_preinit(void); + ulong flashbase = CFG_FLASH_BASE; + + flash_preinit(); + + /* Init: no FLASHes known */ + memset(&flash_info[0], 0, sizeof(flash_info_t)); + + flash_info[0].size = + flash_get_size((FPW *)flashbase, &flash_info[0]); + + size = flash_info[0].size; + +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+monitor_flash_len-1, + flash_get_info(CFG_MONITOR_BASE)); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR+CFG_ENV_SIZE-1, + flash_get_info(CFG_ENV_ADDR)); +#endif + + return size ? size : 1; +} + +/*----------------------------------------------------------------------- + */ +static void flash_reset(flash_info_t *info) +{ + FPWV *base = (FPWV *)(info->start[0]); + + /* Put FLASH back in read mode */ + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) + *base = (FPW)0x00FF00FF; /* Intel Read Mode */ + else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) + *base = (FPW)0x00F000F0; /* AMD Read Mode */ +} + +/*----------------------------------------------------------------------- + */ + +static flash_info_t *flash_get_info(ulong base) +{ + int i; + flash_info_t * info; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) { + info = & flash_info[i]; + if (info->size && info->start[0] <= base && + base <= info->start[0] + info->size - 1) + break; + } + + return i == CFG_MAX_FLASH_BANKS ? 0 : info; +} + +/*----------------------------------------------------------------------- + */ + +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("STM "); break; + case FLASH_MAN_INTEL: printf ("INTEL "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM116DB: + printf ("AM29LV116DB (16Mbit, bottom boot sect)\n"); + break; + case FLASH_AMLV128U: + printf ("AM29LV128ML (128Mbit, uniform sector size)\n"); + break; + case FLASH_AM160B: + printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, + info->sector_count); + + printf (" Sector Start Addresses:"); + + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ + +ulong flash_get_size (FPWV *addr, flash_info_t *info) +{ + int i; + ulong base = (ulong)addr; + + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ + + /* The manufacturer codes are only 1 byte, so just use 1 byte. + * This works for any bus width and any FLASH device width. + */ + udelay(100); + switch (addr[0] & 0xff) { + + case (uchar)AMD_MANUFACT: + debug ("Manufacturer: AMD (Spansion)\n"); + info->flash_id = FLASH_MAN_AMD; + break; + + case (uchar)INTEL_MANUFACT: + debug ("Manufacturer: Intel (not supported yet)\n"); + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + break; + } + + /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ + if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) { + + case (uchar)AMD_ID_LV116DB: + debug ("Chip: AM29LV116DB\n"); + info->flash_id += FLASH_AM116DB; + info->sector_count = 35; + info->size = 0x00200000; + /* + * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all + * the other ones are 64 kB + */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for( i = 4; i < info->sector_count; i++ ) + info->start[i] = + base + (i * (64 << 10)) - 0x00030000; + break; /* => 2 MB */ + + case (FPW)AMD_ID_LV160B: + debug ("Chip: AM29LV160MB\n"); + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00400000; + /* + * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all + * the other ones are 64 kB + */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00008000; + info->start[2] = base + 0x0000C000; + info->start[3] = base + 0x00010000; + for( i = 4; i < info->sector_count; i++ ) + info->start[i] = + base + (i * 2 * (64 << 10)) - 0x00060000; + break; /* => 4 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + } + + /* Put FLASH back in read mode */ + flash_reset(info); + + return (info->size); +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + FPWV *addr = (FPWV*)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + + debug ("flash_erase: first: %d last: %d\n", s_first, s_last); + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id == FLASH_UNKNOWN) || + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[0x0555] = (FPW)0x00AA00AA; + addr[0x02AA] = (FPW)0x00550055; + addr[0x0555] = (FPW)0x00800080; + addr[0x0555] = (FPW)0x00AA00AA; + addr[0x02AA] = (FPW)0x00550055; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (FPWV*)(info->start[sect]); + addr[0] = (FPW)0x00300030; + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (FPWV*)(info->start[l_sect]); + while ((addr[0] & (FPW)0x00800080) != (FPW)0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + +DONE: + /* reset to read mode */ + addr = (FPWV*)info->start[0]; + addr[0] = (FPW)0x00F000F0; /* reset bank */ + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + int i, rc = 0; + + for (i = 0; i < cnt; i++) + if ((rc = write_word_amd(info, (FPW *)(addr+i), src[i])) != 0) { + return (rc); + } + + return rc; +} + +/*----------------------------------------------------------------------- + * Write a word to Flash for AMD FLASH + * A word is 16 or 32 bits, whichever the bus width of the flash bank + * (not an individual chip) is. + * + * returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) +{ + ulong start; + int flag; + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*dest & data) != data) { + return (2); + } + + base = (FPWV *)(info->start[0]); + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ + + *dest = data; /* start programming the data */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + start = get_timer (0); + + /* data polling for D7 */ + while ((*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (FPW)0x00F000F0; /* reset bank */ + return (1); + } + } + return (0); +} diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c new file mode 100644 index 0000000000..3dec6849b1 --- /dev/null +++ b/board/inka4x0/inka4x0.c @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#if defined(CONFIG_MPC5200_DDR) +#include "mt46v16m16-75.h" +#else +#include "mt48lc16m16a2-75.h" +#endif + +#ifndef CFG_RAMBOOT +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); +#endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + +/* return dramsize + dramsize2; */ + return dramsize; +} + +int checkboard (void) +{ + puts ("Board: INKA 4X0 (Indatec GmbH & Co. KG)\n"); + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + diff --git a/board/inka4x0/mt46v16m16-75.h b/board/inka4x0/mt46v16m16-75.h new file mode 100644 index 0000000000..f650faaa10 --- /dev/null +++ b/board/inka4x0/mt46v16m16-75.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 1 /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif diff --git a/board/inka4x0/mt48lc16m16a2-75.h b/board/inka4x0/mt48lc16m16a2-75.h new file mode 100644 index 0000000000..13a97ac462 --- /dev/null +++ b/board/inka4x0/mt48lc16m16a2-75.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 1 /* is SDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x00CD0000 +/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +/* #define SDRAM_CONFIG1 0xD2222800 */ /* CAS latency 2 */ +/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ +#define SDRAM_CONFIG2 0x8AD70000 +/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ + +#elif defined(CONFIG_MGT5100) +/* Settings for XLB = 66 MHz */ +#define SDRAM_MODE 0x008D0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xC2222600 +#define SDRAM_CONFIG2 0x88B70004 +#define SDRAM_ADDRSEL 0x02000000 + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif diff --git a/board/inka4x0/u-boot.lds b/board/inka4x0/u-boot.lds new file mode 100644 index 0000000000..fda49773ea --- /dev/null +++ b/board/inka4x0/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mpc5xxx/start.o (.text) + cpu/mpc5xxx/traps.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/cache.o (.text) + lib_ppc/time.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.ppcenv) + + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 81b932ca18..935fee8ca7 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -870,7 +870,8 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); #if defined(CONFIG_ICECUBE) || defined(CONFIG_PM520) || \ - defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) + defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) || \ + defined(CONFIG_INKA4X0) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h new file mode 100644 index 0000000000..c7dbfd0d9d --- /dev/null +++ b/include/configs/inka4x0.h @@ -0,0 +1,244 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_INKA4X0 1 /* INKA4x0 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#if (TEXT_BASE == 0xFFE00000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk3.0_ppc/ppc_82xx\0" \ + "bootfile=uImage\0" \ + "serverip=192.168.1.1\0" \ + "ipaddr=192.168.160.2\0" \ + "ethaddr=00:00:1A:1B:CE:AF\0" \ + "dk=tftp 100000 inka4x0/u-boot.dk;protect off all;erase ffe00000 ffe2ffff;cp.b 100000 ffe00000 $(filesize)\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xFFE00000 + +#define CFG_FLASH_SIZE 0x00200000 /* 2 MByte */ +#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */ + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) /* second sector */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CONFIG_MPC5200_DDR + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, I2C1 is used for onboard EEPROM + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard + * EEPROM + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000): + * 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible. + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#if defined (CONFIG_MINIFAP) +#define CFG_GPS_PORT_CONFIG 0x93000004 +#else +#define CFG_GPS_PORT_CONFIG 0x83000004 +#endif + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#endif /* __CONFIG_H */ diff --git a/include/flash.h b/include/flash.h index a93c9b2250..20ef2c3ef8 100644 --- a/include/flash.h +++ b/include/flash.h @@ -149,6 +149,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define AMD_ID_F016D 0xAD /* 29F016 ID ( 2 M x 8) */ #define AMD_ID_F032B 0x41 /* 29F032 ID ( 4 M x 8) */ #define AMD_ID_LV116DT 0xC7 /* 29LV116DT ( 2 M x 8, top boot sect) */ +#define AMD_ID_LV116DB 0x4C /* 29LV116DB ( 2 M x 8, bottom boot sect) */ #define AMD_ID_LV016B 0xc8 /* 29LV016 ID ( 2 M x 8) */ #define AMD_ID_PL160CB 0x22452245 /* 29PL160CB ID (16 M, bottom boot sect */ @@ -284,6 +285,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_AM800T 0x0004 /* AMD AM29LV800 */ #define FLASH_AM800B 0x0005 #define FLASH_AM116DT 0x0026 /* AMD AM29LV116DT (2Mx8bit) */ +#define FLASH_AM116DB 0x0027 /* AMD AM29LV116DB (2Mx8bit) */ #define FLASH_AM160T 0x0006 /* AMD AM29LV160 */ #define FLASH_AM160LV 0x0046 /* AMD29LV160DB (2M = 2Mx8bit ) */ #define FLASH_AM160B 0x0007