From: Ashok Reddy Soma Date: Wed, 15 Jun 2022 09:52:28 +0000 (+0200) Subject: pinctrl: zynqmp: Add support for output-enable and bias-high-impedance X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=123462e5e534d6e17b1b7d2006734bbe54b03e0a;p=u-boot.git pinctrl: zynqmp: Add support for output-enable and bias-high-impedance Add support to handle 'output-enable' and 'bias-high-impedance' configurations. DT property output-enable brings out the pins from tri-state, whereas bias-high-impedance changes the pins state to tri-state. Signed-off-by: Ashok Reddy Soma Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/1a02cd41d183d397ebce23c497178281c7286692.1655286745.git.michal.simek@amd.com --- diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c index 7c5a02db1b..52d428f566 100644 --- a/drivers/pinctrl/pinctrl-zynqmp.c +++ b/drivers/pinctrl/pinctrl-zynqmp.c @@ -467,6 +467,10 @@ static int zynqmp_pinconf_set(struct udevice *dev, unsigned int pin, pin); break; case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + param = PM_PINCTRL_CONFIG_TRI_STATE; + arg = PM_PINCTRL_TRI_STATE_ENABLE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; case PIN_CONFIG_LOW_POWER_MODE: /* * This cases are mentioned in dts but configurable @@ -475,6 +479,11 @@ static int zynqmp_pinconf_set(struct udevice *dev, unsigned int pin, */ ret = 0; break; + case PIN_CONFIG_OUTPUT_ENABLE: + param = PM_PINCTRL_CONFIG_TRI_STATE; + arg = PM_PINCTRL_TRI_STATE_DISABLE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; default: dev_warn(dev, "unsupported configuration parameter '%u'\n", param);