From: Tom Rini Date: Thu, 31 Mar 2022 17:46:45 +0000 (-0400) Subject: net: Remove ax88180 driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=122126adbd2eb6c72813b4c7641e4f8eb07ea0cf;p=u-boot.git net: Remove ax88180 driver This driver is not enabled by any board and not converted to DM_ETH. Remove. Signed-off-by: Tom Rini --- diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b57149b339..1d753bb7c2 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_CORTINA_NI_ENET) += cortina_ni.o obj-$(CONFIG_CS8900) += cs8900.o obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o obj-$(CONFIG_DNET) += dnet.o -obj-$(CONFIG_DRIVER_AX88180) += ax88180.o obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c deleted file mode 100644 index 402bcdb63e..0000000000 --- a/drivers/net/ax88180.c +++ /dev/null @@ -1,755 +0,0 @@ -/* - * ax88180: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver - * - * This program is free software; you can distribute it and/or modify - * it under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * This program is distributed in the hope it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * See the GNU General Public License for more details. - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -/* - * ======================================================================== - * ASIX AX88180 Non-PCI 16/32-bit Gigabit Ethernet Linux Driver - * - * The AX88180 Ethernet controller is a high performance and highly - * integrated local CPU bus Ethernet controller with embedded 40K bytes - * SRAM and supports both 16-bit and 32-bit SRAM-Like interfaces for any - * embedded systems. - * The AX88180 is a single chip 10/100/1000Mbps Gigabit Ethernet - * controller that supports both MII and RGMII interfaces and is - * compliant to IEEE 802.3, IEEE 802.3u and IEEE 802.3z standards. - * - * Please visit ASIX's web site (http://www.asix.com.tw) for more - * details. - * - * Module Name : ax88180.c - * Date : 2008-07-07 - * History - * 09/06/2006 : New release for AX88180 US2 chip. - * 07/07/2008 : Fix up the coding style and using inline functions - * instead of macros - * ======================================================================== - */ -#include -#include -#include -#include -#include -#include -#include -#include "ax88180.h" - -/* - * =========================================================================== - * Local SubProgram Declaration - * =========================================================================== - */ -static void ax88180_rx_handler (struct eth_device *dev); -static int ax88180_phy_initial (struct eth_device *dev); -static void ax88180_media_config (struct eth_device *dev); -static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev); -static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev); -static unsigned short ax88180_mdio_read (struct eth_device *dev, - unsigned long regaddr); -static void ax88180_mdio_write (struct eth_device *dev, - unsigned long regaddr, unsigned short regdata); - -/* - * =========================================================================== - * Local SubProgram Bodies - * =========================================================================== - */ -static int ax88180_mdio_check_complete (struct eth_device *dev) -{ - int us_cnt = 10000; - unsigned short tmpval; - - /* MDIO read/write should not take more than 10 ms */ - while (--us_cnt) { - tmpval = INW (dev, MDIOCTRL); - if (((tmpval & READ_PHY) == 0) && ((tmpval & WRITE_PHY) == 0)) - break; - } - - return us_cnt; -} - -static unsigned short -ax88180_mdio_read (struct eth_device *dev, unsigned long regaddr) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned long tmpval = 0; - - OUTW (dev, (READ_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL); - - if (ax88180_mdio_check_complete (dev)) - tmpval = INW (dev, MDIODP); - else - printf ("Failed to read PHY register!\n"); - - return (unsigned short)(tmpval & 0xFFFF); -} - -static void -ax88180_mdio_write (struct eth_device *dev, unsigned long regaddr, - unsigned short regdata) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - - OUTW (dev, regdata, MDIODP); - - OUTW (dev, (WRITE_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL); - - if (!ax88180_mdio_check_complete (dev)) - printf ("Failed to write PHY register!\n"); -} - -static int ax88180_phy_reset (struct eth_device *dev) -{ - unsigned short delay_cnt = 500; - - ax88180_mdio_write (dev, MII_BMCR, (BMCR_RESET | BMCR_ANENABLE)); - - /* Wait for the reset to complete, or time out (500 ms) */ - while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) { - udelay(1000); - if (--delay_cnt == 0) { - printf ("Failed to reset PHY!\n"); - return -1; - } - } - - return 0; -} - -static void ax88180_mac_reset (struct eth_device *dev) -{ - unsigned long tmpval; - unsigned char i; - - struct { - unsigned short offset, value; - } program_seq[] = { - { - MISC, MISC_NORMAL}, { - RXINDICATOR, DEFAULT_RXINDICATOR}, { - TXCMD, DEFAULT_TXCMD}, { - TXBS, DEFAULT_TXBS}, { - TXDES0, DEFAULT_TXDES0}, { - TXDES1, DEFAULT_TXDES1}, { - TXDES2, DEFAULT_TXDES2}, { - TXDES3, DEFAULT_TXDES3}, { - TXCFG, DEFAULT_TXCFG}, { - MACCFG2, DEFAULT_MACCFG2}, { - MACCFG3, DEFAULT_MACCFG3}, { - TXLEN, DEFAULT_TXLEN}, { - RXBTHD0, DEFAULT_RXBTHD0}, { - RXBTHD1, DEFAULT_RXBTHD1}, { - RXFULTHD, DEFAULT_RXFULTHD}, { - DOGTHD0, DEFAULT_DOGTHD0}, { - DOGTHD1, DEFAULT_DOGTHD1},}; - - OUTW (dev, MISC_RESET_MAC, MISC); - tmpval = INW (dev, MISC); - - for (i = 0; i < ARRAY_SIZE(program_seq); i++) - OUTW (dev, program_seq[i].value, program_seq[i].offset); -} - -static int ax88180_poll_tx_complete (struct eth_device *dev) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned long tmpval, txbs_txdp; - int TimeOutCnt = 10000; - - txbs_txdp = 1 << priv->NextTxDesc; - - while (TimeOutCnt--) { - - tmpval = INW (dev, TXBS); - - if ((tmpval & txbs_txdp) == 0) - break; - - udelay(100); - } - - if (TimeOutCnt) - return 0; - else - return -TimeOutCnt; -} - -static void ax88180_rx_handler (struct eth_device *dev) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned long data_size; - unsigned short rxcurt_ptr, rxbound_ptr, next_ptr; - int i; -#if defined (CONFIG_DRIVER_AX88180_16BIT) - unsigned short *rxdata = (unsigned short *)net_rx_packets[0]; -#else - unsigned long *rxdata = (unsigned long *)net_rx_packets[0]; -#endif - unsigned short count; - - rxcurt_ptr = INW (dev, RXCURT); - rxbound_ptr = INW (dev, RXBOUND); - next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK; - - debug ("ax88180: RX original RXBOUND=0x%04x," - " RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr); - - while (next_ptr != rxcurt_ptr) { - - OUTW (dev, RX_START_READ, RXINDICATOR); - - data_size = READ_RXBUF (dev) & 0xFFFF; - - if ((data_size == 0) || (data_size > MAX_RX_SIZE)) { - - OUTW (dev, RX_STOP_READ, RXINDICATOR); - - ax88180_mac_reset (dev); - printf ("ax88180: Invalid Rx packet length!" - " (len=0x%04lx)\n", data_size); - - debug ("ax88180: RX RXBOUND=0x%04x," - "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr); - return; - } - - rxbound_ptr += (((data_size + 0xF) & 0xFFF0) >> 4) + 1; - rxbound_ptr &= RX_PAGE_NUM_MASK; - - /* Comput access times */ - count = (data_size + priv->PadSize) >> priv->BusWidth; - - for (i = 0; i < count; i++) { - *(rxdata + i) = READ_RXBUF (dev); - } - - OUTW (dev, RX_STOP_READ, RXINDICATOR); - - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[0], data_size); - - OUTW (dev, rxbound_ptr, RXBOUND); - - rxcurt_ptr = INW (dev, RXCURT); - rxbound_ptr = INW (dev, RXBOUND); - next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK; - - debug ("ax88180: RX updated RXBOUND=0x%04x," - "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr); - } - - return; -} - -static int ax88180_phy_initial (struct eth_device *dev) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned long tmp_regval; - unsigned short phyaddr; - - /* Search for first avaliable PHY chipset */ -#ifdef CONFIG_PHY_ADDR - phyaddr = CONFIG_PHY_ADDR; -#else - for (phyaddr = 0; phyaddr < 32; ++phyaddr) -#endif - { - priv->PhyAddr = phyaddr; - priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1); - priv->PhyID1 = ax88180_mdio_read(dev, MII_PHYSID2); - - switch (priv->PhyID0) { - case MARVELL_ALASKA_PHYSID0: - debug("ax88180: Found Marvell Alaska PHY family." - " (PHY Addr=0x%x)\n", priv->PhyAddr); - - switch (priv->PhyID1) { - case MARVELL_88E1118_PHYSID1: - ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 2); - ax88180_mdio_write(dev, M88E1118_CR, - M88E1118_CR_DEFAULT); - ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 3); - ax88180_mdio_write(dev, M88E1118_LEDCTL, - M88E1118_LEDCTL_DEFAULT); - ax88180_mdio_write(dev, M88E1118_LEDMIX, - M88E1118_LEDMIX_LED050 | M88E1118_LEDMIX_LED150 | 0x15); - ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 0); - default: /* Default to 88E1111 Phy */ - tmp_regval = ax88180_mdio_read(dev, M88E1111_EXT_SSR); - if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE) - ax88180_mdio_write(dev, M88E1111_EXT_SCR, - DEFAULT_EXT_SCR); - } - - if (ax88180_phy_reset(dev) < 0) - return 0; - ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT); - - return 1; - - case CICADA_CIS8201_PHYSID0: - debug("ax88180: Found CICADA CIS8201 PHY" - " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr); - - ax88180_mdio_write(dev, CIS_IMR, - (CIS_INT_ENABLE | LINK_CHANGE_INT)); - - /* Set CIS_SMI_PRIORITY bit before force the media mode */ - tmp_regval = ax88180_mdio_read(dev, CIS_AUX_CTRL_STATUS); - tmp_regval &= ~CIS_SMI_PRIORITY; - ax88180_mdio_write(dev, CIS_AUX_CTRL_STATUS, tmp_regval); - - return 1; - - case 0xffff: - /* No PHY at this addr */ - break; - - default: - printf("ax88180: Unknown PHY chipset %#x at addr %#x\n", - priv->PhyID0, priv->PhyAddr); - break; - } - } - - printf("ax88180: Unknown PHY chipset!!\n"); - return 0; -} - -static void ax88180_media_config (struct eth_device *dev) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned long bmcr_val, bmsr_val; - unsigned long rxcfg_val, maccfg0_val, maccfg1_val; - unsigned long RealMediaMode; - int i; - - /* Waiting 2 seconds for PHY link stable */ - for (i = 0; i < 20000; i++) { - bmsr_val = ax88180_mdio_read (dev, MII_BMSR); - if (bmsr_val & BMSR_LSTATUS) { - break; - } - udelay(100); - } - - bmsr_val = ax88180_mdio_read (dev, MII_BMSR); - debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val); - - if (bmsr_val & BMSR_LSTATUS) { - bmcr_val = ax88180_mdio_read (dev, MII_BMCR); - - if (bmcr_val & BMCR_ANENABLE) { - - /* - * Waiting for Auto-negotiation completion, this may - * take up to 5 seconds. - */ - debug ("ax88180: Auto-negotiation is " - "enabled. Waiting for NWay completion..\n"); - for (i = 0; i < 50000; i++) { - bmsr_val = ax88180_mdio_read (dev, MII_BMSR); - if (bmsr_val & BMSR_ANEGCOMPLETE) { - break; - } - udelay(100); - } - } else - debug ("ax88180: Auto-negotiation is disabled.\n"); - - debug ("ax88180: BMCR=0x%04x, BMSR=0x%04x\n", - (unsigned int)bmcr_val, (unsigned int)bmsr_val); - - /* Get real media mode here */ - switch (priv->PhyID0) { - case MARVELL_ALASKA_PHYSID0: - RealMediaMode = get_MarvellPHY_media_mode(dev); - break; - case CICADA_CIS8201_PHYSID0: - RealMediaMode = get_CicadaPHY_media_mode(dev); - break; - default: - RealMediaMode = MEDIA_1000FULL; - break; - } - - priv->LinkState = INS_LINK_UP; - - switch (RealMediaMode) { - case MEDIA_1000FULL: - debug ("ax88180: 1000Mbps Full-duplex mode.\n"); - rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG; - maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0; - maccfg1_val = GIGA_MODE_EN | RXFLOW_EN | - FULLDUPLEX | DEFAULT_MACCFG1; - break; - - case MEDIA_1000HALF: - debug ("ax88180: 1000Mbps Half-duplex mode.\n"); - rxcfg_val = DEFAULT_RXCFG; - maccfg0_val = DEFAULT_MACCFG0; - maccfg1_val = GIGA_MODE_EN | DEFAULT_MACCFG1; - break; - - case MEDIA_100FULL: - debug ("ax88180: 100Mbps Full-duplex mode.\n"); - rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG; - maccfg0_val = SPEED100 | TXFLOW_ENABLE - | DEFAULT_MACCFG0; - maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1; - break; - - case MEDIA_100HALF: - debug ("ax88180: 100Mbps Half-duplex mode.\n"); - rxcfg_val = DEFAULT_RXCFG; - maccfg0_val = SPEED100 | DEFAULT_MACCFG0; - maccfg1_val = DEFAULT_MACCFG1; - break; - - case MEDIA_10FULL: - debug ("ax88180: 10Mbps Full-duplex mode.\n"); - rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG; - maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0; - maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1; - break; - - case MEDIA_10HALF: - debug ("ax88180: 10Mbps Half-duplex mode.\n"); - rxcfg_val = DEFAULT_RXCFG; - maccfg0_val = DEFAULT_MACCFG0; - maccfg1_val = DEFAULT_MACCFG1; - break; - default: - debug ("ax88180: Unknow media mode.\n"); - rxcfg_val = DEFAULT_RXCFG; - maccfg0_val = DEFAULT_MACCFG0; - maccfg1_val = DEFAULT_MACCFG1; - - priv->LinkState = INS_LINK_DOWN; - break; - } - - } else { - rxcfg_val = DEFAULT_RXCFG; - maccfg0_val = DEFAULT_MACCFG0; - maccfg1_val = DEFAULT_MACCFG1; - - priv->LinkState = INS_LINK_DOWN; - } - - OUTW (dev, rxcfg_val, RXCFG); - OUTW (dev, maccfg0_val, MACCFG0); - OUTW (dev, maccfg1_val, MACCFG1); - - return; -} - -static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev) -{ - unsigned long m88_ssr; - unsigned long MediaMode; - - m88_ssr = ax88180_mdio_read (dev, M88_SSR); - switch (m88_ssr & SSR_MEDIA_MASK) { - case SSR_1000FULL: - MediaMode = MEDIA_1000FULL; - break; - case SSR_1000HALF: - MediaMode = MEDIA_1000HALF; - break; - case SSR_100FULL: - MediaMode = MEDIA_100FULL; - break; - case SSR_100HALF: - MediaMode = MEDIA_100HALF; - break; - case SSR_10FULL: - MediaMode = MEDIA_10FULL; - break; - case SSR_10HALF: - MediaMode = MEDIA_10HALF; - break; - default: - MediaMode = MEDIA_UNKNOWN; - break; - } - - return MediaMode; -} - -static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev) -{ - unsigned long tmp_regval; - unsigned long MediaMode; - - tmp_regval = ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS); - switch (tmp_regval & CIS_MEDIA_MASK) { - case CIS_1000FULL: - MediaMode = MEDIA_1000FULL; - break; - case CIS_1000HALF: - MediaMode = MEDIA_1000HALF; - break; - case CIS_100FULL: - MediaMode = MEDIA_100FULL; - break; - case CIS_100HALF: - MediaMode = MEDIA_100HALF; - break; - case CIS_10FULL: - MediaMode = MEDIA_10FULL; - break; - case CIS_10HALF: - MediaMode = MEDIA_10HALF; - break; - default: - MediaMode = MEDIA_UNKNOWN; - break; - } - - return MediaMode; -} - -static void ax88180_halt (struct eth_device *dev) -{ - /* Disable AX88180 TX/RX functions */ - OUTW (dev, WAKEMOD, CMD); -} - -static int ax88180_init (struct eth_device *dev, struct bd_info * bd) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned short tmp_regval; - - ax88180_mac_reset (dev); - - /* Disable interrupt */ - OUTW (dev, CLEAR_IMR, IMR); - - /* Disable AX88180 TX/RX functions */ - OUTW (dev, WAKEMOD, CMD); - - /* Fill the MAC address */ - tmp_regval = - dev->enetaddr[0] | (((unsigned short)dev->enetaddr[1]) << 8); - OUTW (dev, tmp_regval, MACID0); - - tmp_regval = - dev->enetaddr[2] | (((unsigned short)dev->enetaddr[3]) << 8); - OUTW (dev, tmp_regval, MACID1); - - tmp_regval = - dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8); - OUTW (dev, tmp_regval, MACID2); - - ax88180_media_config (dev); - - OUTW (dev, DEFAULT_RXFILTER, RXFILTER); - - /* Initial variables here */ - priv->FirstTxDesc = TXDP0; - priv->NextTxDesc = TXDP0; - - /* Check if there is any invalid interrupt status and clear it. */ - OUTW (dev, INW (dev, ISR), ISR); - - /* Start AX88180 TX/RX functions */ - OUTW (dev, (RXEN | TXEN | WAKEMOD), CMD); - - return 0; -} - -/* Get a data block via Ethernet */ -static int ax88180_recv (struct eth_device *dev) -{ - unsigned short ISR_Status; - unsigned short tmp_regval; - - /* Read and check interrupt status here. */ - ISR_Status = INW (dev, ISR); - - while (ISR_Status) { - /* Clear the interrupt status */ - OUTW (dev, ISR_Status, ISR); - - debug ("\nax88180: The interrupt status = 0x%04x\n", - ISR_Status); - - if (ISR_Status & ISR_PHY) { - /* Read ISR register once to clear PHY interrupt bit */ - tmp_regval = ax88180_mdio_read (dev, M88_ISR); - ax88180_media_config (dev); - } - - if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) { - ax88180_rx_handler (dev); - } - - /* Read and check interrupt status again */ - ISR_Status = INW (dev, ISR); - } - - return 0; -} - -/* Send a data block via Ethernet. */ -static int ax88180_send(struct eth_device *dev, void *packet, int length) -{ - struct ax88180_private *priv = (struct ax88180_private *)dev->priv; - unsigned short TXDES_addr; - unsigned short txcmd_txdp, txbs_txdp; - unsigned short tmp_data; - int i; -#if defined (CONFIG_DRIVER_AX88180_16BIT) - volatile unsigned short *txdata = (volatile unsigned short *)packet; -#else - volatile unsigned long *txdata = (volatile unsigned long *)packet; -#endif - unsigned short count; - - if (priv->LinkState != INS_LINK_UP) { - return 0; - } - - priv->FirstTxDesc = priv->NextTxDesc; - txbs_txdp = 1 << priv->FirstTxDesc; - - debug ("ax88180: TXDP%d is available\n", priv->FirstTxDesc); - - txcmd_txdp = priv->FirstTxDesc << 13; - TXDES_addr = TXDES0 + (priv->FirstTxDesc << 2); - - OUTW (dev, (txcmd_txdp | length | TX_START_WRITE), TXCMD); - - /* Comput access times */ - count = (length + priv->PadSize) >> priv->BusWidth; - - for (i = 0; i < count; i++) { - WRITE_TXBUF (dev, *(txdata + i)); - } - - OUTW (dev, txcmd_txdp | length, TXCMD); - OUTW (dev, txbs_txdp, TXBS); - OUTW (dev, (TXDPx_ENABLE | length), TXDES_addr); - - priv->NextTxDesc = (priv->NextTxDesc + 1) & TXDP_MASK; - - /* - * Check the available transmit descriptor, if we had exhausted all - * transmit descriptor ,then we have to wait for at least one free - * descriptor - */ - txbs_txdp = 1 << priv->NextTxDesc; - tmp_data = INW (dev, TXBS); - - if (tmp_data & txbs_txdp) { - if (ax88180_poll_tx_complete (dev) < 0) { - ax88180_mac_reset (dev); - priv->FirstTxDesc = TXDP0; - priv->NextTxDesc = TXDP0; - printf ("ax88180: Transmit time out occurred!\n"); - } - } - - return 0; -} - -static void ax88180_read_mac_addr (struct eth_device *dev) -{ - unsigned short macid0_val, macid1_val, macid2_val; - unsigned short tmp_regval; - unsigned short i; - - /* Reload MAC address from EEPROM */ - OUTW (dev, RELOAD_EEPROM, PROMCTRL); - - /* Waiting for reload eeprom completion */ - for (i = 0; i < 500; i++) { - tmp_regval = INW (dev, PROMCTRL); - if ((tmp_regval & RELOAD_EEPROM) == 0) - break; - udelay(1000); - } - - /* Get MAC addresses */ - macid0_val = INW (dev, MACID0); - macid1_val = INW (dev, MACID1); - macid2_val = INW (dev, MACID2); - - if (((macid0_val | macid1_val | macid2_val) != 0) && - ((macid0_val & 0x01) == 0)) { - dev->enetaddr[0] = (unsigned char)macid0_val; - dev->enetaddr[1] = (unsigned char)(macid0_val >> 8); - dev->enetaddr[2] = (unsigned char)macid1_val; - dev->enetaddr[3] = (unsigned char)(macid1_val >> 8); - dev->enetaddr[4] = (unsigned char)macid2_val; - dev->enetaddr[5] = (unsigned char)(macid2_val >> 8); - } -} - -/* Exported SubProgram Bodies */ -int ax88180_initialize (struct bd_info * bis) -{ - struct eth_device *dev; - struct ax88180_private *priv; - - dev = (struct eth_device *)malloc (sizeof *dev); - - if (NULL == dev) - return 0; - - memset (dev, 0, sizeof *dev); - - priv = (struct ax88180_private *)malloc (sizeof (*priv)); - - if (NULL == priv) - return 0; - - memset (priv, 0, sizeof *priv); - - strcpy(dev->name, "ax88180"); - dev->iobase = AX88180_BASE; - dev->priv = priv; - dev->init = ax88180_init; - dev->halt = ax88180_halt; - dev->send = ax88180_send; - dev->recv = ax88180_recv; - - priv->BusWidth = BUS_WIDTH_32; - priv->PadSize = 3; -#if defined (CONFIG_DRIVER_AX88180_16BIT) - OUTW (dev, (START_BASE >> 8), BASE); - OUTW (dev, DECODE_EN, DECODE); - - priv->BusWidth = BUS_WIDTH_16; - priv->PadSize = 1; -#endif - - ax88180_mac_reset (dev); - - /* Disable interrupt */ - OUTW (dev, CLEAR_IMR, IMR); - - /* Disable AX88180 TX/RX functions */ - OUTW (dev, WAKEMOD, CMD); - - ax88180_read_mac_addr (dev); - - eth_register (dev); - - return ax88180_phy_initial (dev); - -} diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h deleted file mode 100644 index daf18e0157..0000000000 --- a/drivers/net/ax88180.h +++ /dev/null @@ -1,396 +0,0 @@ -/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */ -/* - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ - -#ifndef _AX88180_H_ -#define _AX88180_H_ - -#include -#include -#include - -typedef enum _ax88180_link_state { - INS_LINK_DOWN, - INS_LINK_UP, - INS_LINK_UNKNOWN -} ax88180_link_state; - -struct ax88180_private { - unsigned char BusWidth; - unsigned char PadSize; - unsigned short PhyAddr; - unsigned short PhyID0; - unsigned short PhyID1; - unsigned short FirstTxDesc; - unsigned short NextTxDesc; - ax88180_link_state LinkState; -}; - -#define BUS_WIDTH_16 1 -#define BUS_WIDTH_32 2 - -#define ENABLE_JUMBO 1 -#define DISABLE_JUMBO 0 - -#define ENABLE_BURST 1 -#define DISABLE_BURST 0 - -#define NORMAL_RX_MODE 0 -#define RX_LOOPBACK_MODE 1 -#define RX_INIFINIT_LOOP_MODE 2 -#define TX_INIFINIT_LOOP_MODE 3 - -#define DEFAULT_ETH_MTU 1500 - -/* Jumbo packet size 4086 bytes included 4 bytes CRC*/ -#define MAX_JUMBO_MTU 4072 - -/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */ -#define MAX_TX_JUMBO_SIZE 4086 - -/* Max Rx Jumbo size is 15K Bytes */ -#define MAX_RX_SIZE 0x3C00 - -#define MARVELL_ALASKA_PHYSID0 0x141 -#define MARVELL_88E1118_PHYSID1 0xE40 - -#define CICADA_CIS8201_PHYSID0 0x000F - -#define MEDIA_AUTO 0 -#define MEDIA_1000FULL 1 -#define MEDIA_1000HALF 2 -#define MEDIA_100FULL 3 -#define MEDIA_100HALF 4 -#define MEDIA_10FULL 5 -#define MEDIA_10HALF 6 -#define MEDIA_UNKNOWN 7 - -#define AUTO_MEDIA 0 -#define FORCE_MEDIA 1 - -#define TXDP_MASK 3 -#define TXDP0 0 -#define TXDP1 1 -#define TXDP2 2 -#define TXDP3 3 - -#define CMD_MAP_SIZE 0x100 - -#if defined (CONFIG_DRIVER_AX88180_16BIT) - #define AX88180_MEMORY_SIZE 0x00004000 - #define START_BASE 0x1000 - - #define RX_BUF_SIZE 0x1000 - #define TX_BUF_SIZE 0x0F00 - - #define TX_BASE START_BASE - #define CMD_BASE (TX_BASE + TX_BUF_SIZE) - #define RX_BASE (CMD_BASE + CMD_MAP_SIZE) -#else - #define AX88180_MEMORY_SIZE 0x00010000 - - #define RX_BUF_SIZE 0x8000 - #define TX_BUF_SIZE 0x7C00 - - #define RX_BASE 0x0000 - #define TX_BASE (RX_BASE + RX_BUF_SIZE) - #define CMD_BASE (TX_BASE + TX_BUF_SIZE) -#endif - -/* AX88180 Memory Mapping Definition */ -#define RXBUFFER_START RX_BASE - #define RX_PACKET_LEN_OFFSET 0 - #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */ -#define TXBUFFER_START TX_BASE - -/* AX88180 MAC Register Definition */ -#define DECODE (0) - #define DECODE_EN 0x00000001 -#define BASE (6) -#define CMD (CMD_BASE + 0x0000) - #define WAKEMOD 0x00000001 - #define TXEN 0x00000100 - #define RXEN 0x00000200 - #define DEFAULT_CMD WAKEMOD -#define IMR (CMD_BASE + 0x0004) - #define IMR_RXBUFFOVR 0x00000001 - #define IMR_WATCHDOG 0x00000002 - #define IMR_TX 0x00000008 - #define IMR_RX 0x00000010 - #define IMR_PHY 0x00000020 - #define CLEAR_IMR 0x00000000 - #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\ - IMR_RXBUFFOVR | IMR_WATCHDOG) -#define ISR (CMD_BASE + 0x0008) - #define ISR_RXBUFFOVR 0x00000001 - #define ISR_WATCHDOG 0x00000002 - #define ISR_TX 0x00000008 - #define ISR_RX 0x00000010 - #define ISR_PHY 0x00000020 -#define TXCFG (CMD_BASE + 0x0010) - #define AUTOPAD_CRC 0x00000050 - #define DEFAULT_TXCFG AUTOPAD_CRC -#define TXCMD (CMD_BASE + 0x0014) - #define TXCMD_TXDP_MASK 0x00006000 - #define TXCMD_TXDP0 0x00000000 - #define TXCMD_TXDP1 0x00002000 - #define TXCMD_TXDP2 0x00004000 - #define TXCMD_TXDP3 0x00006000 - #define TX_START_WRITE 0x00008000 - #define TX_STOP_WRITE 0x00000000 - #define DEFAULT_TXCMD 0x00000000 -#define TXBS (CMD_BASE + 0x0018) - #define TXDP0_USED 0x00000001 - #define TXDP1_USED 0x00000002 - #define TXDP2_USED 0x00000004 - #define TXDP3_USED 0x00000008 - #define DEFAULT_TXBS 0x00000000 -#define TXDES0 (CMD_BASE + 0x0020) - #define TXDPx_ENABLE 0x00008000 - #define TXDPx_LEN_MASK 0x00001FFF - #define DEFAULT_TXDES0 0x00000000 -#define TXDES1 (CMD_BASE + 0x0024) - #define TXDPx_ENABLE 0x00008000 - #define TXDPx_LEN_MASK 0x00001FFF - #define DEFAULT_TXDES1 0x00000000 -#define TXDES2 (CMD_BASE + 0x0028) - #define TXDPx_ENABLE 0x00008000 - #define TXDPx_LEN_MASK 0x00001FFF - #define DEFAULT_TXDES2 0x00000000 -#define TXDES3 (CMD_BASE + 0x002C) - #define TXDPx_ENABLE 0x00008000 - #define TXDPx_LEN_MASK 0x00001FFF - #define DEFAULT_TXDES3 0x00000000 -#define RXCFG (CMD_BASE + 0x0030) - #define RXBUFF_PROTECT 0x00000001 - #define RXTCPCRC_CHECK 0x00000010 - #define RXFLOW_ENABLE 0x00000100 - #define DEFAULT_RXCFG RXBUFF_PROTECT -#define RXCURT (CMD_BASE + 0x0034) - #define DEFAULT_RXCURT 0x00000000 -#define RXBOUND (CMD_BASE + 0x0038) - #define DEFAULT_RXBOUND 0x7FF /* RX pages 0~7FFh */ -#define MACCFG0 (CMD_BASE + 0x0040) - #define MACCFG0_BIT3_0 0x00000007 - #define IPGT_VAL 0x00000150 - #define TXFLOW_ENABLE 0x00001000 - #define SPEED100 0x00008000 - #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0) -#define MACCFG1 (CMD_BASE + 0x0044) - #define RGMII_EN 0x00000002 - #define RXFLOW_EN 0x00000020 - #define FULLDUPLEX 0x00000040 - #define MAX_JUMBO_LEN 0x00000780 - #define RXJUMBO_EN 0x00000800 - #define GIGA_MODE_EN 0x00001000 - #define RXCRC_CHECK 0x00002000 - #define RXPAUSE_DA_CHECK 0x00004000 - - #define JUMBO_LEN_4K 0x00000200 - #define JUMBO_LEN_15K 0x00000780 - #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \ - RGMII_EN) - #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK) -#define MACCFG2 (CMD_BASE + 0x0048) - #define MACCFG2_BIT15_8 0x00000100 - #define JAM_LIMIT_MASK 0x000000FC - #define DEFAULT_JAM_LIMIT 0x00000064 - #define DEFAULT_MACCFG2 MACCFG2_BIT15_8 -#define MACCFG3 (CMD_BASE + 0x004C) - #define IPGR2_VAL 0x0000000E - #define IPGR1_VAL 0x00000600 - #define NOABORT 0x00008000 - #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL) -#define TXPAUT (CMD_BASE + 0x0054) - #define DEFAULT_TXPAUT 0x001FE000 -#define RXBTHD0 (CMD_BASE + 0x0058) - #define DEFAULT_RXBTHD0 0x00000300 -#define RXBTHD1 (CMD_BASE + 0x005C) - #define DEFAULT_RXBTHD1 0x00000600 -#define RXFULTHD (CMD_BASE + 0x0060) - #define DEFAULT_RXFULTHD 0x00000100 -#define MISC (CMD_BASE + 0x0068) - /* Normal operation mode */ - #define MISC_NORMAL 0x00000003 - /* Clear bit 0 to reset MAC */ - #define MISC_RESET_MAC 0x00000002 - /* Clear bit 1 to reset PHY */ - #define MISC_RESET_PHY 0x00000001 - /* Clear bit 0 and 1 to reset MAC and PHY */ - #define MISC_RESET_MAC_PHY 0x00000000 - #define DEFAULT_MISC MISC_NORMAL -#define MACID0 (CMD_BASE + 0x0070) -#define MACID1 (CMD_BASE + 0x0074) -#define MACID2 (CMD_BASE + 0x0078) -#define TXLEN (CMD_BASE + 0x007C) - #define DEFAULT_TXLEN 0x000005FC -#define RXFILTER (CMD_BASE + 0x0080) - #define RX_RXANY 0x00000001 - #define RX_MULTICAST 0x00000002 - #define RX_UNICAST 0x00000004 - #define RX_BROADCAST 0x00000008 - #define RX_MULTI_HASH 0x00000010 - #define DISABLE_RXFILTER 0x00000000 - #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST) -#define MDIOCTRL (CMD_BASE + 0x0084) - #define PHY_ADDR_MASK 0x0000001F - #define REG_ADDR_MASK 0x00001F00 - #define READ_PHY 0x00004000 - #define WRITE_PHY 0x00008000 -#define MDIODP (CMD_BASE + 0x0088) -#define GPIOCTRL (CMD_BASE + 0x008C) -#define RXINDICATOR (CMD_BASE + 0x0090) - #define RX_START_READ 0x00000001 - #define RX_STOP_READ 0x00000000 - #define DEFAULT_RXINDICATOR RX_STOP_READ -#define TXST (CMD_BASE + 0x0094) -#define MDCCLKPAT (CMD_BASE + 0x00A0) -#define RXIPCRCCNT (CMD_BASE + 0x00A4) -#define RXCRCCNT (CMD_BASE + 0x00A8) -#define TXFAILCNT (CMD_BASE + 0x00AC) -#define PROMDP (CMD_BASE + 0x00B0) -#define PROMCTRL (CMD_BASE + 0x00B4) - #define RELOAD_EEPROM 0x00000200 -#define MAXRXLEN (CMD_BASE + 0x00B8) -#define HASHTAB0 (CMD_BASE + 0x00C0) -#define HASHTAB1 (CMD_BASE + 0x00C4) -#define HASHTAB2 (CMD_BASE + 0x00C8) -#define HASHTAB3 (CMD_BASE + 0x00CC) -#define DOGTHD0 (CMD_BASE + 0x00E0) - #define DEFAULT_DOGTHD0 0x0000FFFF -#define DOGTHD1 (CMD_BASE + 0x00E4) - #define START_WATCHDOG_TIMER 0x00008000 - #define DEFAULT_DOGTHD1 0x00000FFF -#define SOFTRST (CMD_BASE + 0x00EC) - #define SOFTRST_NORMAL 0x00000003 - #define SOFTRST_RESET_MAC 0x00000002 - -/* Marvell 88E1111 Gigabit PHY Register Definition */ -#define M88_SSR 0x0011 - #define SSR_SPEED_MASK 0xC000 - #define SSR_SPEED_1000 0x8000 - #define SSR_SPEED_100 0x4000 - #define SSR_SPEED_10 0x0000 - #define SSR_DUPLEX 0x2000 - #define SSR_MEDIA_RESOLVED_OK 0x0800 - - #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX) - #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX) - #define SSR_1000HALF SSR_SPEED_1000 - #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX) - #define SSR_100HALF SSR_SPEED_100 - #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX) - #define SSR_10HALF SSR_SPEED_10 -#define M88_IER 0x0012 - #define LINK_CHANGE_INT 0x0400 -#define M88_ISR 0x0013 - #define LINK_CHANGE_STATUS 0x0400 -#define M88E1111_EXT_SCR 0x0014 - #define RGMII_RXCLK_DELAY 0x0080 - #define RGMII_TXCLK_DELAY 0x0002 - #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY) -#define M88E1111_EXT_SSR 0x001B - #define HWCFG_MODE_MASK 0x000F - #define RGMII_COPPER_MODE 0x000B - -/* Marvell 88E1118 Gigabit PHY Register Definition */ -#define M88E1118_CR 0x14 - #define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020 - #define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010 - #define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \ - M88E1118_CR_RGMII_RXCLK_DELAY) -#define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */ - #define M88E1118_LEDCTL_LED2INT 0x200 - #define M88E1118_LEDCTL_LED2BLNK 0x400 - #define M88E1118_LEDCTL_LED0DUALMODE1 0xc - #define M88E1118_LEDCTL_LED0DUALMODE2 0xd - #define M88E1118_LEDCTL_LED0DUALMODE3 0xe - #define M88E1118_LEDCTL_LED0DUALMODE4 0xf - #define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \ - M88E1118_LEDCTL_LED0DUALMODE4) - -#define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */ - #define M88E1118_LEDMIX_LED050 0x4 - #define M88E1118_LEDMIX_LED150 0x8 - -#define M88E1118_PAGE_SEL 0x16 /* Reg page select */ - -/* CICADA CIS8201 Gigabit PHY Register Definition */ -#define CIS_IMR 0x0019 - #define CIS_INT_ENABLE 0x8000 - #define CIS_LINK_CHANGE_INT 0x2000 -#define CIS_ISR 0x001A - #define CIS_INT_PENDING 0x8000 - #define CIS_LINK_CHANGE_STATUS 0x2000 -#define CIS_AUX_CTRL_STATUS 0x001C - #define CIS_AUTONEG_COMPLETE 0x8000 - #define CIS_SPEED_MASK 0x0018 - #define CIS_SPEED_1000 0x0010 - #define CIS_SPEED_100 0x0008 - #define CIS_SPEED_10 0x0000 - #define CIS_DUPLEX 0x0020 - - #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX) - #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX) - #define CIS_1000HALF CIS_SPEED_1000 - #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX) - #define CIS_100HALF CIS_SPEED_100 - #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX) - #define CIS_10HALF CIS_SPEED_10 - #define CIS_SMI_PRIORITY 0x0004 - -static inline unsigned short INW (struct eth_device *dev, unsigned long addr) -{ - return le16_to_cpu(readw(addr + (void *)dev->iobase)); -} - -/* - Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer -*/ -#if defined (CONFIG_DRIVER_AX88180_16BIT) -static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) -{ - writew(cpu_to_le16(command), addr + (void *)dev->iobase); -} - -static inline unsigned short READ_RXBUF (struct eth_device *dev) -{ - return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase)); -} - -static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) -{ - writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase); -} -#else -static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) -{ - writel(cpu_to_le32(command), addr + (void *)dev->iobase); -} - -static inline unsigned long READ_RXBUF (struct eth_device *dev) -{ - return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase)); -} - -static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) -{ - writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase); -} -#endif - -#endif /* _AX88180_H_ */