From: Phil Edworthy Date: Mon, 13 Feb 2012 02:03:50 +0000 (+0000) Subject: sh: Fix sh7264 clock speed and related serial setting X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=117029c510c75f4c6d7ecb1172635d6a08755cf8;p=u-boot.git sh: Fix sh7264 clock speed and related serial setting The generalised calculation of the serial bit rate reg also applies to sh7264, it was just the clock speed that was set incorrectly. Signed-off-by: Phil Edworthy Signed-off-by: Nobuhiro Iwamatsu --- diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index 4e16e4803c..0b3e779c8e 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -686,8 +686,6 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#elif defined(CONFIG_CPU_SH7264) -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)) #else /* Generic SH */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index c1ffc348f7..af9524e8bf 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -65,7 +65,7 @@ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SYS_CLK_FREQ 36000000 #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)