From: Wolfgang Denk Date: Fri, 16 Jun 2006 14:53:06 +0000 (+0200) Subject: Fix DDR6 errata on TQM834x boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=10af6d53bcf068b91c1b6ce6aa0fad5d89b36f81;p=u-boot.git Fix DDR6 errata on TQM834x boards Patch by Thomas Waehner, 07 Mar 2006 --- diff --git a/CHANGELOG b/CHANGELOG index cfa774175b..c1fc890d49 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Fix DDR6 errata on TQM834x boards + Patch by Thomas Waehner, 07 Mar 2006 + * Remove obsolete flash driver board/tqm5200/flash.c Patch by Martin Krause, 11 Jan 2006 diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index b5c12e3e24..d992aec381 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -406,4 +406,28 @@ static void set_ddr_config(void) { (DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) | (DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT); SYNC; + + /* Workaround for DDR6 Erratum + * see MPC8349E Device Errata Rev.8, 2/2006 + * This workaround influences the MPC internal "input enables" + * dependent on CAS latency and MPC revision. According to errata + * sheet the internal reserved registers for this workaround are + * not available from revision 2.0 and up. + */ + + /* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0 + * (0x200) + */ + if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) { + + /* There is a internal reserved register at IMMRBAR+0x2F00 + * which has to be written with a certain value defined by + * errata sheet. + */ +#if defined(DDR_CASLAT_20) + *((u8 *)im + 0x2f00) = 0x201c0000; +#else + *((u8 *)im + 0x2f00) = 0x202c0000; +#endif + } }