From: Vladimir Oltean Date: Wed, 23 Feb 2022 13:20:55 +0000 (+0200) Subject: net: phy: dp83867: avoid error in dp83867_of_init() when PHY has no OF node X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=107b14e36eaafebdc28666a9d5fecdd4044a59e3;p=u-boot.git net: phy: dp83867: avoid error in dp83867_of_init() when PHY has no OF node A DM_ETH driver may use phy_connect() towards a PHY address on an MDIO bus which is not specified in the device tree, as evidenced by: pfe_eth_probe -> pfe_phy_configure -> phy_connect When this happens, the PHY will have an invalid OF node. The dp83867_config() method has extra initialization steps which are bypassed when the PHY lacks an OF node, which is undesirable because it will lead to broken networking. Allow the rest of the code to run. Fixes: 085445ca4104 ("net: phy: ti: Allow the driver to be more configurable") Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried --- diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index eada4541c9..49978d0f25 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -158,7 +158,7 @@ static int dp83867_of_init(struct phy_device *phydev) node = phy_get_ofnode(phydev); if (!ofnode_valid(node)) - return -EINVAL; + return 0; /* Optional configuration */ ret = ofnode_read_u32(node, "ti,clk-output-sel",