From: Samuel Holland Date: Fri, 8 Oct 2021 05:17:20 +0000 (-0500) Subject: i2c: Add a DM_I2C driver for the sun6i P2WI controller X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=104950a7feae7926e40676f27cfbd279a43b4bc3;p=u-boot.git i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index da35cc87e8..f4a45284bd 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -88,17 +88,6 @@ config DRAM_SUN50I_H616_UNKNOWN_FEATURE feature. endif -config SUN6I_P2WI - bool "Allwinner sun6i internal P2WI controller" - help - If you say yes to this option, support will be included for the - P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi - SOCs. - The P2WI looks like an SMBus controller (which supports only byte - accesses), except that it only supports one slave device. - This interface is used to connect to specific PMIC devices (like the - AXP221). - config SUN6I_PRCM bool help @@ -232,10 +221,11 @@ config MACH_SUN6I select ARCH_SUPPORT_PSCI select DRAM_SUN6I select PHY_SUN4I_USB - select SUN6I_P2WI + select SPL_I2C select SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL + select SYS_I2C_SUN6I_P2WI select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT config MACH_SUN7I diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 3f081d92f3..c9312bb393 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -11,7 +11,6 @@ obj-y += clock.o obj-y += cpu_info.o obj-y += dram_helpers.o obj-y += pinmux.o -obj-$(CONFIG_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_SUN6I_PRCM) += prcm.o obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o obj-$(CONFIG_SUN8I_RSB) += rsb.o diff --git a/arch/arm/mach-sunxi/p2wi.c b/arch/arm/mach-sunxi/p2wi.c deleted file mode 100644 index 7c5c12254e..0000000000 --- a/arch/arm/mach-sunxi/p2wi.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Sunxi A31 Power Management Unit - * - * (C) Copyright 2013 Oliver Schinagl - * http://linux-sunxi.org - * - * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work - * - * (C) Copyright 2006-2013 - * Allwinner Technology Co., Ltd. - * Berg Xing - * Tom Cubie - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void p2wi_init(void) -{ - struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; - - /* Enable p2wi and PIO clk, and de-assert their resets */ - prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI); - - sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK); - sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA); - - /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */ - writel(P2WI_CTRL_RESET, &p2wi->ctrl); - sdelay(0x100); - writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8), - &p2wi->cc); -} - -int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data) -{ - struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; - unsigned long tmo = timer_get_us() + 1000000; - - writel(P2WI_PM_DEV_ADDR(slave_addr) | - P2WI_PM_CTRL_ADDR(ctrl_reg) | - P2WI_PM_INIT_DATA(init_data) | - P2WI_PM_INIT_SEND, - &p2wi->pm); - - while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) { - if (timer_get_us() > tmo) - return -ETIME; - } - - return 0; -} - -static int p2wi_await_trans(void) -{ - struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; - unsigned long tmo = timer_get_us() + 1000000; - int ret; - u8 reg; - - while (1) { - reg = readl(&p2wi->status); - if (reg & P2WI_STAT_TRANS_ERR) { - ret = -EIO; - break; - } - if (reg & P2WI_STAT_TRANS_DONE) { - ret = 0; - break; - } - if (timer_get_us() > tmo) { - ret = -ETIME; - break; - } - } - writel(reg, &p2wi->status); /* Clear status bits */ - return ret; -} - -int p2wi_read(const u8 addr, u8 *data) -{ - struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; - int ret; - - writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); - writel(P2WI_DATA_NUM_BYTES(1) | - P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes); - writel(P2WI_STAT_TRANS_DONE, &p2wi->status); - writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); - - ret = p2wi_await_trans(); - - *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK; - return ret; -} - -int p2wi_write(const u8 addr, u8 data) -{ - struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; - - writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); - writel(P2WI_DATA_BYTE_1(data), &p2wi->data0); - writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes); - writel(P2WI_STAT_TRANS_DONE, &p2wi->status); - writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); - - return p2wi_await_trans(); -} diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c index 0394ce8564..673a05fdd1 100644 --- a/arch/arm/mach-sunxi/pmic_bus.c +++ b/arch/arm/mach-sunxi/pmic_bus.c @@ -8,6 +8,7 @@ * axp223 uses the rsb bus, these functions abstract this. */ +#include #include #include #include @@ -21,8 +22,6 @@ #define AXP305_I2C_ADDR 0x36 #define AXP221_CHIP_ADDR 0x68 -#define AXP221_CTRL_ADDR 0x3e -#define AXP221_INIT_DATA 0x3e /* AXP818 device and runtime addresses are same as AXP223 */ #define AXP223_DEVICE_ADDR 0x3a3 @@ -40,8 +39,8 @@ int pmic_bus_init(void) #if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I p2wi_init(); - ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, - AXP221_INIT_DATA); + ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP_PMIC_MODE_REG, + AXP_PMIC_MODE_P2WI); # elif defined CONFIG_MACH_SUN8I_R40 /* Nothing. R40 uses the AXP221s in I2C mode */ ret = 0; diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 57cac4483f..0adf143abf 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -575,6 +575,14 @@ config SYS_I2C_STM32F7 _ Optional clock stretching _ Software reset +config SYS_I2C_SUN6I_P2WI + bool "Allwinner sun6i P2WI controller" + depends on ARCH_SUNXI + help + Support for the P2WI (Push/Pull 2 Wire Interface) controller embedded + in the Allwinner A31 and A31s SOCs. This interface is used to connect + to specific devices like the X-Powers AXP221 PMIC. + config SYS_I2C_SYNQUACER bool "Socionext SynQuacer I2C controller" depends on ARCH_SYNQUACER && DM_I2C diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 67841bf3e0..0a2cc64193 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_STM32F7) += stm32f7_i2c.o +obj-$(CONFIG_SYS_I2C_SUN6I_P2WI) += sun6i_p2wi.o obj-$(CONFIG_SYS_I2C_SYNQUACER) += synquacer_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o diff --git a/drivers/i2c/sun6i_p2wi.c b/drivers/i2c/sun6i_p2wi.c new file mode 100644 index 0000000000..c9e1b3fcd5 --- /dev/null +++ b/drivers/i2c/sun6i_p2wi.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Sunxi A31 Power Management Unit + * + * (C) Copyright 2013 Oliver Schinagl + * http://linux-sunxi.org + * + * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work + * + * (C) Copyright 2006-2013 + * Allwinner Technology Co., Ltd. + * Berg Xing + * Tom Cubie + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int sun6i_p2wi_await_trans(struct sunxi_p2wi_reg *base) +{ + unsigned long tmo = timer_get_us() + 1000000; + int ret; + u8 reg; + + while (1) { + reg = readl(&base->status); + if (reg & P2WI_STAT_TRANS_ERR) { + ret = -EIO; + break; + } + if (reg & P2WI_STAT_TRANS_DONE) { + ret = 0; + break; + } + if (timer_get_us() > tmo) { + ret = -ETIME; + break; + } + } + writel(reg, &base->status); /* Clear status bits */ + + return ret; +} + +static int sun6i_p2wi_read(struct sunxi_p2wi_reg *base, const u8 addr, u8 *data) +{ + int ret; + + writel(P2WI_DATADDR_BYTE_1(addr), &base->dataddr0); + writel(P2WI_DATA_NUM_BYTES(1) | + P2WI_DATA_NUM_BYTES_READ, &base->numbytes); + writel(P2WI_STAT_TRANS_DONE, &base->status); + writel(P2WI_CTRL_TRANS_START, &base->ctrl); + + ret = sun6i_p2wi_await_trans(base); + + *data = readl(&base->data0) & P2WI_DATA_BYTE_1_MASK; + + return ret; +} + +static int sun6i_p2wi_write(struct sunxi_p2wi_reg *base, const u8 addr, u8 data) +{ + writel(P2WI_DATADDR_BYTE_1(addr), &base->dataddr0); + writel(P2WI_DATA_BYTE_1(data), &base->data0); + writel(P2WI_DATA_NUM_BYTES(1), &base->numbytes); + writel(P2WI_STAT_TRANS_DONE, &base->status); + writel(P2WI_CTRL_TRANS_START, &base->ctrl); + + return sun6i_p2wi_await_trans(base); +} + +static int sun6i_p2wi_change_to_p2wi_mode(struct sunxi_p2wi_reg *base, + u8 slave_addr, u8 ctrl_reg, + u8 init_data) +{ + unsigned long tmo = timer_get_us() + 1000000; + + writel(P2WI_PM_DEV_ADDR(slave_addr) | + P2WI_PM_CTRL_ADDR(ctrl_reg) | + P2WI_PM_INIT_DATA(init_data) | + P2WI_PM_INIT_SEND, + &base->pm); + + while ((readl(&base->pm) & P2WI_PM_INIT_SEND)) { + if (timer_get_us() > tmo) + return -ETIME; + } + + return 0; +} + +static void sun6i_p2wi_init(struct sunxi_p2wi_reg *base) +{ + /* Enable p2wi and PIO clk, and de-assert their resets */ + prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI); + + sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK); + sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA); + + /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */ + writel(P2WI_CTRL_RESET, &base->ctrl); + sdelay(0x100); + writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8), + &base->cc); +} + +#if IS_ENABLED(CONFIG_AXP_PMIC_BUS) +int p2wi_read(const u8 addr, u8 *data) +{ + struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; + + return sun6i_p2wi_read(base, addr, data); +} + +int p2wi_write(const u8 addr, u8 data) +{ + struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; + + return sun6i_p2wi_write(base, addr, data); +} + +int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data) +{ + struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; + + return sun6i_p2wi_change_to_p2wi_mode(base, slave_addr, ctrl_reg, + init_data); +} + +void p2wi_init(void) +{ + struct sunxi_p2wi_reg *base = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; + + sun6i_p2wi_init(base); +} +#endif + +#if CONFIG_IS_ENABLED(DM_I2C) +struct sun6i_p2wi_priv { + struct sunxi_p2wi_reg *base; +}; + +static int sun6i_p2wi_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) +{ + struct sun6i_p2wi_priv *priv = dev_get_priv(bus); + + /* The hardware only supports SMBus-style transfers. */ + if (nmsgs == 2 && msg[1].flags == I2C_M_RD && msg[1].len == 1) + return sun6i_p2wi_read(priv->base, + msg[0].buf[0], &msg[1].buf[0]); + + if (nmsgs == 1 && msg[0].len == 2) + return sun6i_p2wi_write(priv->base, + msg[0].buf[0], msg[0].buf[1]); + + return -EINVAL; +} + +static int sun6i_p2wi_probe_chip(struct udevice *bus, uint chip_addr, + uint chip_flags) +{ + struct sun6i_p2wi_priv *priv = dev_get_priv(bus); + + return sun6i_p2wi_change_to_p2wi_mode(priv->base, chip_addr, + AXP_PMIC_MODE_REG, + AXP_PMIC_MODE_P2WI); +} + +static int sun6i_p2wi_probe(struct udevice *bus) +{ + struct sun6i_p2wi_priv *priv = dev_get_priv(bus); + + priv->base = dev_read_addr_ptr(bus); + + sun6i_p2wi_init(priv->base); + + return 0; +} + +static int sun6i_p2wi_child_pre_probe(struct udevice *child) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(child); + + /* Ensure each transfer is for a single register. */ + chip->flags |= DM_I2C_CHIP_RD_ADDRESS | DM_I2C_CHIP_WR_ADDRESS; + + return 0; +} + +static const struct dm_i2c_ops sun6i_p2wi_ops = { + .xfer = sun6i_p2wi_xfer, + .probe_chip = sun6i_p2wi_probe_chip, +}; + +static const struct udevice_id sun6i_p2wi_ids[] = { + { .compatible = "allwinner,sun6i-a31-p2wi" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(sun6i_p2wi) = { + .name = "sun6i_p2wi", + .id = UCLASS_I2C, + .of_match = sun6i_p2wi_ids, + .probe = sun6i_p2wi_probe, + .child_pre_probe = sun6i_p2wi_child_pre_probe, + .priv_auto = sizeof(struct sun6i_p2wi_priv), + .ops = &sun6i_p2wi_ops, +}; +#endif /* CONFIG_IS_ENABLED(DM_I2C) */ diff --git a/include/axp_pmic.h b/include/axp_pmic.h index 405044c3a3..0db3e143ed 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -6,6 +6,8 @@ */ #ifndef _AXP_PMIC_H_ +#include + #ifdef CONFIG_AXP152_POWER #include #endif @@ -25,6 +27,10 @@ #include #endif +#define AXP_PMIC_MODE_REG 0x3e +#define AXP_PMIC_MODE_I2C 0x00 +#define AXP_PMIC_MODE_P2WI 0x3e + int axp_set_dcdc1(unsigned int mvolt); int axp_set_dcdc2(unsigned int mvolt); int axp_set_dcdc3(unsigned int mvolt);