From: Samuel Holland Date: Mon, 19 Apr 2021 03:16:21 +0000 (-0500) Subject: sunxi: Select environment MMC based on boot device X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1011ebc72bda061cc9d34c1d6ff4506291a88657;p=u-boot.git sunxi: Select environment MMC based on boot device Currently, the environment is always stored in eMMC if eMMC is enabled in the config. This means images written to SD and eMMC will cross- contaminate their environments unless the configuration is changed. By dropping the device number from the environment location string and implementing mmc_get_env_dev, we will always use the environment from the boot device when booting from SD/eMMC. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 67acc01d83..1a46100e40 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -636,6 +636,20 @@ int board_mmc_init(struct bd_info *bis) return 0; } + +#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 +int mmc_get_env_dev(void) +{ + switch (sunxi_get_boot_device()) { + case BOOT_DEVICE_MMC1: + return 0; + case BOOT_DEVICE_MMC2: + return 1; + default: + return CONFIG_SYS_MMC_ENV_DEV; + } +} +#endif #endif #ifdef CONFIG_SPL_BUILD diff --git a/env/Kconfig b/env/Kconfig index 691f4d480c..67ff172e3a 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -446,8 +446,7 @@ config ENV_FAT_DEVICE_AND_PART depends on ENV_IS_IN_FAT default "0:1" if TI_COMMON_CMD_OPTIONS default "0:auto" if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL - default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 - default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 + default ":auto" if ARCH_SUNXI default "0" if ARCH_AT91 help Define this to a string to specify the partition of the device. It can