From: Ye Li <ye.li@nxp.com>
Date: Wed, 15 Jun 2016 06:18:36 +0000 (+0800)
Subject: mx7dsabresd: Fix LCD_PWR_EN output setting
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0fcb85cc0cdf898019680a09200677a0beef27d9;p=u-boot.git

mx7dsabresd: Fix LCD_PWR_EN output setting

LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect
D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3
is actually 1.2V.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index c3062f1e95..1f4fc03c8f 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -171,7 +171,7 @@ static enum qn_level seq[3][2] = {
 
 static enum qn_func qn_output[8] = {
 	qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable,
-	qn_enable
+	qn_disable
 };
 
 static void iox74lv_init(void)