From: Wolfgang Denk Date: Mon, 7 Dec 2009 22:14:13 +0000 (+0100) Subject: Update CHANGELOG, prepare -rc2 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0fc52948bda0734431cb528ee4fd82f1dec8c7b5;p=u-boot.git Update CHANGELOG, prepare -rc2 Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index bd16ed8744..4bf806ef49 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,1183 @@ +commit f2352877cb2daac88115192fb09991a2397d0b27 +Author: Peter Tyser +Date: Sun Dec 6 23:58:28 2009 -0600 + + MAKEALL: Fix return value + + Previously MAKEALL would always return a value of 0, even if 1 or more + boards did not compile. This change causes MAKEALL to return 0 if all + boards were able to build, otherwise 1. + + This change also requires changing the script interpreter from sh to + bash to support bash's PIPESTATUS variable. + + Signed-off-by: Peter Tyser + +commit fbc1c8f6f6c972524197829c56dd8f2f5da0200a +Author: Peter Tyser +Date: Sun Dec 6 01:33:24 2009 -0600 + + tools/mkimage: Remove duplicate line of code + + Recent commits 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e and + 6a590c5f5fd12cdd27f3153522acfac3854590e7 both fixed the same bug in the + same manner. Unfortunately git was "smart" enough to merge both changes + which resulted in some duplicate code. + + Signed-off-by: Peter Tyser + + Reordered code and comment a bit. + + Signed-off-by: Wolfgang Denk + +commit df002fa6b9cd475909ede35bf95b803c2289c6a4 +Author: Heiko Schocher +Date: Sat Dec 5 11:59:51 2009 +0100 + + i2c: fix dangling comment in do_i2c_mw() + + commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused + code in do_i2c_mw(), but missed to also remove the respective + commment. This patch fixes this. + + Signed-off-by: Heiko Schocher + +commit f8450829f921cf10667af98a8d08edfa3d998f04 +Author: Heiko Schocher +Date: Tue Dec 1 19:30:47 2009 +0100 + + 52xx, manroland: add fdt_fixup_memory() in ft_board_setup() + + To update the real memory size in the memory node on the + uc101 and mucmc52 boards call fdt_fixup_memory() in + ft_board_setup(). + + Signed-off-by: Heiko Schocher + +commit 0ec81db20294efdad2454a753e79f1fe244a43ca +Author: Daniel Hobi +Date: Tue Dec 1 14:05:55 2009 +0100 + + Fix computation in nand_util.c:get_len_incl_bad + + Depending on offset, flash size and the number of bad blocks, + get_len_incl_bad may return a too small value which may lead to: + + 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the + bad block aware read/write code. This may hurt performance, but does + not have any adverse effects. + + 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose + the bad block unaware read/write code (if len_incl_bad == *length) + which leads to corrupted data. + + Signed-off-by: Daniel Hobi + +commit aabb8cb0818e285aeed0cfaf243635997e07554d +Author: Evan Samanas +Date: Mon Nov 9 20:08:36 2009 -0600 + + nfs: NfsTimeout() updates + + - NfsTimeout() does not correctly update the NFS timeout value which + results in NfsTimeout() only being called once in certain situations. + This can result in the 'nfs' command hanging indefinetly. For + example, the command: + + nfs 192.168.0.1:/home/user/file + + will not exit until ctrl-c is pressed if 192.168.0.1 does not have an + NFS server running. + + This issue is resolved by reinitializting the NFS timeout value inside + NfsTimeout() when a timeout occurs. + + - Make the 'nfs' command print the 'T' character when a timeout occurs. + Previously there was no indication that timeouts were occuring. + + - Mimic the 'tftpboot' command and when a download fails print "Retry + count exceeded; starting again", and restart the download taking the + 'netretry' environment variable into account. + + Signed-off-by: Evan Samanas + Signed-off-by: Peter Tyser + + Tested on TQM8xxL. + + Tested by: Wolfgang Denk + + Tested on MPC8527DS. + + Tested by: Ed Swarthout + +commit 224c90d1060bf1a83cbf33ca51d060b9d19e0294 +Author: Peter Tyser +Date: Wed Nov 18 19:08:59 2009 -0600 + + bootm: Fix help message's sub-command ordering + + The help message for the 'bootm' command listed the 'cmdline' and 'bdt' + sub-commands in the wrong order which resulted in the error below when + following the 'help' command's instructions: + + "Trying to execute a command out of order" + + Signed-off-by: Peter Tyser + +commit a93c92cddaedd5f0720e0da15c6664f7a688b582 +Author: Robert P. J. Day +Date: Tue Nov 17 07:30:23 2009 -0500 + + help: Correct syntax of nandecc help output. + + "nandecc" help output should not reproduce the command name, nor have + a trailing newline. + + Signed-off-by: Robert P. J. Day + +commit c2fff331a32ceca837d76eb7827d6340da270d52 +Author: Mike Rapoport +Date: Wed Nov 11 10:03:03 2009 +0200 + + smc911x: update SMC911X related configuration description + + Since commit 736fead8fdbf8a8407048bebc373cd551d01ec98 "Convert SMC911X + Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options + are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update + README to reflect that change. + + Signed-off-by: Mike Rapoport + +commit 45b6b65c6bf06a589ef3123192af94b0381db27b +Author: Mike Rapoport +Date: Wed Nov 11 10:03:09 2009 +0200 + + smc911x: fix typo in smc911x_handle_mac_address name + + Signed-off-by: Mike Rapoport + +commit f64ef9bb995687e24e0b61b52316f4eaa97c3bbc +Author: Ed Swarthout +Date: Thu Nov 19 02:47:28 2009 -0600 + + fix nfs symlink name corruption + + An off by one error may cause nfs readlink lookup fail if + nfs_path_buff has non-zero data from a previous use. + + Loading: *** ERROR: File lookup fail + + Signed-off-by: Ed Swarthout + +commit e8fac25e83426fdf461c66aa8a2530ec28ec536e +Author: Wolfgang Denk +Date: Mon Dec 7 21:06:40 2009 +0100 + + at91sam9261ek.c: fix minor coding style issue. + + Signed-off-by: Wolfgang Denk + +commit 4713010adf5beda87410d637ebfc58db0db9a9db +Author: Wolfgang Denk +Date: Sun Dec 6 01:21:28 2009 +0100 + + trab: fix warning: implicit declaration of function 'disable_vfd' + + Signed-off-by: Wolfgang Denk + +commit a9f99ab44b473fb394169ba365f8b4380f981584 +Author: Wolfgang Denk +Date: Sun Dec 6 00:53:18 2009 +0100 + + zlib.c: avoid build conflicts for cradle board + + Commit dce3d79710 updated the zlib code to v0.95; this caused + conflicts when building for the "cradle" board, because the (pretty + generic) preprocessor variable "OFF" was used in multiple files. + Make sure to avoid further conflicts by #undef'ing it in zlib.c + before redefining it. + + Signed-off-by: Wolfgang Denk + cc: Giuseppe Condorelli + cc: Angelo Castello + cc: Alessandro Rubini + +commit 8cbf4e4f17121d732e78764f0ba317c9a1838ea6 +Author: Wolfgang Denk +Date: Sun Dec 6 00:26:19 2009 +0100 + + Fix out-of-tree building of "apollon" board. + + Signed-off-by: Wolfgang Denk + +commit f68ab43de67f59925542efb6bcec30f4a84fe695 +Author: Mike Frysinger +Date: Fri Dec 4 05:35:15 2009 -0500 + + lzma: ignore unset filesizes + + The Linux kernel build system changed how it compresses things with LZMA + such that the header no longer contains the filesize (it is instead set to + all F's). So if we get a LZMA image that has -1 for the 64bit field, + let's just assume that the decompressed size is unknown and continue on. + + Signed-off-by: Mike Frysinger + +commit cccfc2ab77877dbdd2abe26b28d4c1f467feb0c0 +Author: Detlev Zundel +Date: Tue Dec 1 17:16:19 2009 +0100 + + README: Rearrange paragraphs to regain linear arrangement. + + Two later additions to the Configuration Option section unfortunately + split the description of Show boot progress and the list of its call outs. + + Signed-off-by: Detlev Zundel + +commit c81296c16fd9d12422c9968cc0f1d9bf440a7d88 +Author: Peter Tyser +Date: Tue Nov 24 16:42:10 2009 -0600 + + tools/mkimage: Print FIT image contents after creation + + Previously, there was no indication to the user that a FIT image was + successfully created after executing mkimage. For example: + + $ mkimage -f uImage.its uImage.itb + DTC: dts->dtb on file "uImage.its" + + Adding some additional output after creating a FIT image lets the user + know exactly what is contained in their image, eg: + + $ mkimage -f uImage.its uImage.itb + DTC: dts->dtb on file "uImage.its" + FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty + Created: Tue Nov 24 15:43:01 2009 + Image 0 (kernel@1) + Description: Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty + Type: Kernel Image + Compression: gzip compressed + Data Size: 2707311 Bytes = 2643.86 kB = 2.58 MB + Architecture: PowerPC + OS: Linux + Load Address: 0x00000000 + Entry Point: 0x00000000 + Hash algo: crc32 + Hash value: efe0798b + Hash algo: sha1 + Hash value: ecafba8c95684f2c8fec67e33c41ec88df1534d7 + Image 1 (fdt@1) + Description: Flattened Device Tree blob + Type: Flat Device Tree + Compression: uncompressed + Data Size: 12288 Bytes = 12.00 kB = 0.01 MB + Architecture: PowerPC + Hash algo: crc32 + Hash value: a5cab676 + Hash algo: sha1 + Hash value: 168722b13e305283cfd6603dfe8248cc329adea6 + Default Configuration: 'config@1' + Configuration 0 (config@1) + Description: Default Linux kernel + Kernel: kernel@1 + FDT: fdt@1 + + This brings the behavior of creating a FIT image in line with creating a + standard uImage, which also prints out the uImage contents after + creation. + + Signed-off-by: Peter Tyser + +commit 8e1c89663cc8796b85588910046e03b388a7597c +Author: Peter Tyser +Date: Tue Nov 24 16:42:09 2009 -0600 + + tools/fit_image.c: Remove unused fit_set_header() + + The FIT fit_set_header() function was copied from the standard uImage's + image_set_header() function during mkimage reorganization. However, the + fit_set_header() function is not used since FIT images use a standard + device tree blob header. + + Signed-off-by: Peter Tyser + +commit 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e +Author: Peter Tyser +Date: Tue Nov 24 16:42:08 2009 -0600 + + tools/mkimage: Assume FDT image type for FIT images + + When building a Flattened Image Tree (FIT) the image type needs to be + "flat_dt". Commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 introduced a + regression which caused the user to need to specify the "-T flat_dt" + parameter on the command line when building a FIT image. The "-T + flat_dt" parameter should not be needed and is at odds with the current + FIT image documentation. + + Signed-off-by: Peter Tyser + +commit 270737acca21f3939f814de5dcf350a1c3d80d83 +Author: Michael Brandt +Date: Sun Nov 22 14:13:27 2009 +0100 + + EXT2FS: fix inode size for ext2fs rev#0 + + extfs.c assumes that there is always a valid inode_size field in the + superblock. But this is not true for ext2fs rev 0. Such ext2fs images + are for instance generated by genext2fs. Symptoms on ARM machines are + messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will + print nothing. + This fix checks for rev 0 and uses then 128 bytes as inode size. + + Signed-off-by: Michael Brandt + Tested on: TQM5200S + Tested-by: Wolfgang Denk + Signed-off-by: Wolfgang Denk + +commit bcb324d68f7955c1136dafc944eb55db8ebaa601 +Author: Robert P. J. Day +Date: Thu Nov 19 11:00:28 2009 -0500 + + Remove superfluous preprocessor tests from some cmd_*.c files. + + A small number of common/cmd_*.c files contain preprocessor tests that + are apparently superfluous since those same tests are used in the + Makefile to control the compilation of those files. Those tests are + clearly redundant as long as they surround the entirety of the source + in those files. + + Signed-off-by: Robert P. J. Day + +commit ad53226156fa64b6d04c0d1d6e91e09979cbea15 +Author: Robert P. J. Day +Date: Tue Nov 17 01:59:29 2009 -0500 + + README: Update the list of directories. + + Bring the directory listing more into line with current content. + + Signed-off-by: Robert P. J. Day + +commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b +Author: Pratap Chandu +Date: Thu Nov 12 19:28:25 2009 +0530 + + Removes dead code in the file common/cmd_i2c.c + + There is some dead code enclosed by #if 0 .... #endif in the file + common/cmd_i2c.c + This patch removes the dead code. + + Signed-off-by: Pratap Chandu + +commit 64a480601a5614b441de692ae15a62c51e0bb381 +Author: Mike Frysinger +Date: Wed Nov 11 17:51:56 2009 -0500 + + smc91111_eeprom: drop CONFIG stub protection + + Since the Makefile now controls the compilation of this, there is no need + for CONFIG checking nor the stub function. + + Signed-off-by: Mike Frysinger + +commit f3a7bddc06c927c36a1a99a97131299479ef207a +Author: Magnus Lilja +Date: Wed Nov 11 19:56:58 2009 +0100 + + RTC: Fix return code in MC13783 RTC driver. + + Signed-off-by: Magnus Lilja + +commit d52e3e0176a74c30549251e16c5c00a363c544d2 +Author: Magnus Lilja +Date: Wed Nov 11 19:56:36 2009 +0100 + + cmd_date: Fix spelling in error message. + + Signed-off-by: Magnus Lilja + +commit c253122395753abb9e531d8906c5265dc8803fb1 +Author: Peter Tyser +Date: Wed Nov 11 10:36:28 2009 -0600 + + Move do_irqinfo() to common/cmd_irq.c + + cmd_irq.c is a much better home and it is already conditionally + compiled based on CONFIG_CMD_IRQ. + + Signed-off-by: Peter Tyser + +commit a5dd4dc64fe68e549c5ffcf6a048281b5ba94752 +Author: Peter Tyser +Date: Wed Nov 11 10:36:19 2009 -0600 + + cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE + + cmd_license is already conditionally compiled at the Makefile-level. + + Signed-off-by: Peter Tyser + +commit 06015146a15adc7455440c491d543f6a8091551d +Author: Peter Tyser +Date: Mon Nov 9 15:18:52 2009 -0600 + + m41t11: Remove unused functions + + Signed-off-by: Peter Tyser + +commit 9ef78511cda39987e5fc10febf386fd19f58ecf7 +Author: Peter Tyser +Date: Mon Nov 9 15:17:50 2009 -0600 + + circbuf: Move to lib_generic and conditionally compile + + circbuf could be used as a generic library and is only currently + needed when CONFIG_USB_TTY is defined. + + Signed-off-by: Peter Tyser + +commit 604f7ce55ad74694ef8743ad2e99933dc0265e46 +Author: Sanjeev Premi +Date: Mon Nov 9 22:43:00 2009 +0530 + + Fix build failure in examples/standalone + + Some versions of 'make' do not handle trailing white-spaces + properly. Trailing spaces in ELF causes a 'fake' source to + be added to the variable COBJS; leading to build failure + (listed below). The problem was found with GNU Make 3.80. + + Using text-function 'strip' as a workaround for the problem. + + make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone' + arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float + -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include + -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1- + 203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe -DCONFIG_ + ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5 + -Wall -Wstrict-prototypes -fno-stack-protector -g -Os -fno-common -ff + ixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje + ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co + desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ + e -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-inte + rwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext 0x80e80000 -o .c + arm-none-linux-gnueabi-gcc: no input files + make[1]: *** [.c] Error 1 + make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone' + make: *** [examples/standalone] Error 2 + premi # + + Signed-off-by: Sanjeev Premi + + Fixed typo (s/ElF/ELF/). + Signed-off-by: Wolfgang Denk + +commit af860962b544ddf323c4ff68454f00d31e44df0a +Author: Becky Bruce +Date: Wed Nov 4 18:30:08 2009 -0600 + + 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files + + A bunch of the 85xx boards have this cruft in them - it's not used + anywhere. Delete it. + + Signed-off-by: Becky Bruce + +commit deec1fbd4f704dded2e668bb9e368631981ea139 +Author: Wolfgang Denk +Date: Wed Dec 2 22:26:30 2009 +0100 + + MAINTAINERS: update responsible for MPC85xx/86xx + + Signed-off-by: Wolfgang Denk + Cc: Kumar Gala + Cc: Becky Bruce + +commit 824d82997fbcf28e49081d36fdd5d3be1b92b03d +Author: Ira W. Snyder +Date: Wed Nov 4 13:37:59 2009 -0800 + + Fix example FIT image source files + + The example FIT image source files do not compile with the latest dtc and + mkimage. The following error message is produced: + + DTC: dts->dtb on file "kernel.its" + Error: kernel.its 7:0 - 1:0 syntax error + FATAL ERROR: Unable to parse input tree + ./mkimage: Can't read kernel.itb.tmp: Invalid argument + + The FIT image source files are missing the "/dts-v1/;" directive at the + beginning of the file. Add the directive to the examples. + + Signed-off-by: Ira W. Snyder + +commit fd66066ee3ce15c2966feb9b2be0f0d51a95db48 +Author: Mike Frysinger +Date: Wed Nov 4 16:13:19 2009 -0500 + + img2srec: use standard types + + The img2srec code creates a lot of typedefs with common names. These + easily clash with system headers that include these typedefs (like mingw). + + Signed-off-by: Mike Frysinger + +commit 8204e068110e8abe5db9c3b7df9971b58cda8f26 +Author: Mike Frysinger +Date: Wed Nov 4 16:03:25 2009 -0500 + + tools: gitignore *.exe binaries + + Signed-off-by: Mike Frysinger + +commit 425d3b666eee5c58fdb82fb894a535dd71782a05 +Author: Peter Tyser +Date: Tue Nov 3 23:31:07 2009 -0600 + + ppc: Move conditional compilation of kgdb.c to Makefile + + Signed-off-by: Peter Tyser + +commit e06ab6546b332acc55ac4e7c31338662328b0fb3 +Author: Mike Frysinger +Date: Tue Nov 3 11:36:39 2009 -0500 + + spi_flash.h: pull in linux/types.h for u## types + +commit 0008555f4d57c15ad86ee735861ca0d783042f61 +Author: Mike Frysinger +Date: Tue Nov 3 11:36:26 2009 -0500 + + bootm: mark local boot_os[] table static + + Signed-off-by: Mike Frysinger + +commit a8fa379d47f06c7d3ed75c8fb26ae43ee38e1fd7 +Author: Nishanth Menon +Date: Mon Nov 2 09:40:18 2009 -0600 + + mkconfig: deny messed up ARCH definition + + Refuse to setup a platform if the command line ARCH= is not the same + as the one required for the board. This prevents any user with + prehistoric aliases from messing up their builds. + + Reported in thread: + http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html + + Inputs from: Mike Frysinger and Wolfgang Denk: + http://lists.denx.de/pipermail/u-boot/2009-November/063642.html + + Cc: Wolfgang Denk + Cc: Mike Frysinger + Cc: Anand Gadiyar + Cc: Dirk Behme + Signed-off-by: Nishanth Menon + +commit 67b96e87da1b84660fa1e5b78cc760246d116814 +Author: Remy Bohmer +Date: Wed Oct 28 22:13:39 2009 +0100 + + Repair the 'netretry=once' option. + + 'netretry = once' does the same as 'netretry = yes', because it is not stored + when it was tried once. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit b25e38fc36e13fa8037fa4d37fe909d1d6e6f372 +Author: Remy Bohmer +Date: Thu Oct 29 14:24:22 2009 +0100 + + Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y + + Signed-off-by: Remy Bohmer + +commit 01826abc02ce160501534788e63629ccbe31b05c +Author: Grazvydas Ignotas +Date: Thu Nov 12 11:46:07 2009 +0200 + + OMAP3: pandora: fix booting without serial attached + + When the board is booted without serial cable attached (which + is how most of them will be used) UART RX is left floating and + sometimes picks noise, which interrupts countdown and enters + U-Boot prompt instead of booting the kernel. + + Fix this by setting up internal pullup on UART RX pin. This + does not prevent serial from working as the internal pullup + is weak. + + Signed-off-by: Grazvydas Ignotas + +commit 41dfd8a60324243dbe2dc313a607910824a68aa7 +Author: Remy Bohmer +Date: Wed Oct 28 22:13:37 2009 +0100 + + Add support for CS2 dataflash for Atmel-SPI. + + The only missing chipselect line support is CS2, and I need it on + CS2... + + Signed-off-by: Remy Bohmer + +commit faf36c1437c95e4a86835633d9801c5f6396a3c7 +Author: Remy Bohmer +Date: Wed Oct 28 22:13:36 2009 +0100 + + Fix mingw tools build + + mkimage does not build due to missing strtok_r() and getline() implementation + + Signed-off-by: Remy Bohmer + +commit 6a590c5f5fd12cdd27f3153522acfac3854590e7 +Author: Remy Bohmer +Date: Wed Oct 28 22:13:35 2009 +0100 + + Building of FIT images does not work. + + The type is not set for generation of the FIT images, resulting + in no images being created without printing or returning an error + + Signed-off-by: Remy Bohmer + +commit 0a7691e820e33b23f61c6ea0ef6fa72099d1a6ae +Author: Renato Andreola +Date: Mon Nov 23 16:45:14 2009 -0500 + + Nios2: do_boom_linux(): kernel gunzip input data integrity problem due to + missing cache flush. + + Added instruction and data caches flush. + + Signed-off-by: Scott McNutt + +commit de03825386eaedb5e17261dd87cde86e9a764ba9 +Author: Scott McNutt +Date: Mon Nov 23 16:29:40 2009 -0500 + + Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables) + + Signed-off-by: Scott McNutt + +commit 57baa379cf2f67df89a5c6052767fd25daff20bd +Author: Scott McNutt +Date: Mon Nov 23 15:54:25 2009 -0500 + + Nios2/Nios: Remove unnecessary (residual) linker Nios command scripts from + the standalone examples. + + Signed-off-by: Scott McNutt + +commit fcffb680e77fcb48598d4a9944dbe2d4503170e0 +Author: Mike Frysinger +Date: Wed Oct 14 19:28:03 2009 -0400 + + sf: fix stmicro offset setup while erasing + + Reported-by: Peter Gombos + Signed-off-by: Mike Frysinger + +commit d394a7795027d96ca55799df40bd5c4a13dbeebe +Author: Jason McMullan +Date: Fri Oct 9 17:12:23 2009 -0400 + + sf: new driver for Winbond W25X16/32/64 devices + + Signed-off-by: Jason McMullan + Signed-off-by: Mike Frysinger + +commit cada315100c88894b85972a91309a6f2413966b6 +Author: Marcel Ziswiler +Date: Thu Oct 1 23:55:17 2009 +0200 + + mpc8260: move FDT memory node fixup into common CPU code. + + Signed-off-by: Marcel Ziswiler + Tested-by: Heiko Schocher + +commit f2cea405f83da46b72098ea874fb3eefe185d312 +Author: Po-Yu Chuang +Date: Wed Sep 23 15:52:35 2009 +0800 + + Add driver for FTRTC010 real time clock + + Signed-off-by: Po-Yu Chuang + + Edited commit message. + Signed-off-by: Wolfgang Denk + +commit c0356a88011330646e960dfac8a2c909bede3304 +Author: Mark Jackson +Date: Mon Aug 17 16:42:52 2009 +0100 + + MIMC200: set default fbmem value + + This patch adds a default bootargs "fbmem" value to the + CONFIG_BOOTARGS string for the MIMC200 board. + + Signed-off-by: Mark Jackson + +commit 3ffc0d61bad7d986e344ce7062b37c5c8f04fb0e +Author: Matthias Fuchs +Date: Tue Oct 27 19:58:09 2009 +0100 + + ppc4xx: Initialize magnetic coupler on VOM405 boards + + This patch fixes an ugly behavior of the IL712 magnetic coupler + as used on VOM405. These parts will remember their last state + over a power cycle which might cause unwanted behavior. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit be0db3e3141c6c6b4e232b51091f35a284cc54e5 +Author: Matthias Fuchs +Date: Mon Oct 26 09:58:45 2009 +0100 + + ppc4xx: Initialize magnetic couplers in PLU405 + + This patch fixes an ugly behavior of the IL712 magnetic couplers + as used on PLU405. These parts will remember their last state + over a power cycle which might cause unwanted behavior. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 067f54c66acd469870ef6946e1591bfcc02de1b3 +Author: Matthias Fuchs +Date: Mon Oct 26 09:55:40 2009 +0100 + + Add minimal SJA1000 header for basic CAN mode + + This patch is in preparation for the upcoming PLU405 board fix. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit cdbdbe65f5f006cba208accee5a126c659d4b867 +Author: Kumar Gala +Date: Fri Nov 13 08:52:21 2009 -0600 + + ppc/85xx: Fix how we determine the number of CAM entries + + We were incorrectly use the max CAM size as the number of entries in + the array for setting up the addrmap. We should be using the NENTRY + field which is the low 12-bits of TLB1CFG. + + Signed-off-by: Kumar Gala + +commit fbd47b6753b08162436d9ccad1e63c8d43ede54c +Author: Mike Rapoport +Date: Thu Nov 12 15:35:08 2009 +0200 + + smc911x: make smc911x_initialize return correct value + + Make smc911x_initialize return -1 on error and number of interfaces + detected otherwise. + + Signed-off-by: Mike Rapoport + Acked-by: Mike Frysinger + Signed-off-by: Ben Warren + +commit c44efcf97b335dcef7d014f65b7d3094e79adb13 +Author: Mike Frysinger +Date: Thu Nov 12 22:26:02 2009 -0500 + + smc911x_eeprom: fix building after smc911x overhaul + + When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was + missed. The config option needed updating as well as overhauling of the + rergister read/write functions. + + Signed-off-by: Mike Frysinger + Tested-by: Mike Rapoport + Signed-off-by: Ben Warren + +commit 3ad95deb30ac73bd57e966d321215a17d3236f9f +Author: Dave Liu +Date: Thu Nov 12 07:26:37 2009 +0800 + + fsl-ddr: Fix the chip-select interleaving issue + + commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3 + introduced one new bug to chip-select interleaving. + + Single DDR controller also can do the chip-select + interleaving if there is dual-rank or qual-rank DIMMs. + + Signed-off-by: Dave Liu + Signed-off-by: Kumar Gala + +commit 651ef90fa6ca824c8e581aeef9e04bbbe7f7e9ce +Author: javier Martin +Date: Thu Oct 29 08:22:43 2009 +0100 + + mxc_fec: avoid free() calls to already freed pointers. + + Sometimes, inside NetLoop, eth_halt() is called before eth_init() has + been called. This is harmless except for free() calls to pointers + which have not been allocated yet. + + This patch initializes those pointers to NULL and allocates them only + the first time. This way we can get rid of free calls in halt callback. + + This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. + + Signed-off-by: Javier Martin + Signed-off-by: Ben Warren + +commit e8f1546a88b4ade6a910c4a7958a774ee1b40023 +Author: javier Martin +Date: Thu Oct 29 08:18:34 2009 +0100 + + mxc_fec: fix some erroneous PHY accesses. + + This patch fixes erroneous access to the ethernet PHY which broke the driver. + 1. Selector field in the auto-negotiation register must be 0x00001 for + using 802.3, not 0x00000 which is reseved. + 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not + 0x0 fixed address. + + This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. + + Now using proper defines for auto-negotiation register. + + Signed-off-by: Javier Martin + Signed-off-by: Ben Warren + +commit f865fcbbb35851e75fee9c3a3fa8e0f71d9e6463 +Author: Ron Lee +Date: Wed Aug 5 20:14:01 2009 +0200 + + ARM Don't inline weak symbols + + ------------------------------------------------------------------------ + + GCC 4.4 complains about this now. + + Signed-off-by: Ron Lee + +commit d14c7ec2b51fb92c4a5218b299b772c3d186510d +Author: Ben Warren +Date: Mon Nov 9 13:09:57 2009 -0800 + + Fix SMC91111 regression: lpd7a40x build failures + + Both lpd7a400 and lpd7a404 failed to compile because they had + CONFIG_SMC_USE_IOFUNCS defined: + + examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw' + + Also removed an orphaned paren in lpd7a404.h + + Signed-off-by: Ben Warren + +commit 1031ae960ce6ce8332190278a06e2d72c2b2793e +Author: Ben Warren +Date: Mon Nov 9 14:01:08 2009 -0800 + + SMC91111: Clean up SMC_inx macros on xsengine and xaeniax + + This patch fixes the following warnings: + + Configuring for xaeniax board... + smc91111_eeprom.c: In function 'print_macaddr': + smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of & + smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of & + ... + Configuring for xsengine board... + smc91111_eeprom.c: In function 'print_macaddr': + smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift + smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift + + Signed-off-by: Ben Warren + +commit 830c7b6722c6a9762411bf52a7bf2fae4dc71dab +Author: Ben Warren +Date: Mon Nov 9 11:43:18 2009 -0800 + + Fix CS8900 regression on impa7 board + + The following error was seen on impa7 board, due to its use of a 32-bit bus + on CS8900. + cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1 + + This patch gives the macro the correct number of arguments + + Signed-off-by: Ben Warren + +commit e5c5d9e0834bacf1c4787fa76cc4e369f2597cf5 +Author: Mike Frysinger +Date: Sun Nov 1 22:39:56 2009 -0500 + + clarify eth driver halt/recv steps + + The dev->halt() func can be called at any time, and the dev->recv() func + does not need to use NetRxPackets[] when calling NetReceive(). + + Signed-off-by: Mike Frysinger + Signed-off-by: Ben Warren + +commit 497ab0eec5e1e2dfccc141a4485cd6b940e1424a +Author: Hui.Tang +Date: Thu Nov 5 09:58:44 2009 +0800 + + Fix cs8900 dev->priv not init issue + + Ensure all CS8900 data structures are assigned before accessing device + + Signed-off-by: Hui.Tang + Signed-off-by: Ben Warren + +commit 4fe5193d464ecdac26ddc71b1351be5b86bbff29 +Author: Stefan Roese +Date: Tue Nov 3 14:34:45 2009 +0100 + + ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES) + + This error only appears when DEBUG is enabled in this driver. That's why + it went unnoticed till now. + + Signed-off-by: Stefan Roese + +commit 916ed9444d3ab7b5cd6312557005f2a764a8baf7 +Author: Stefan Roese +Date: Thu Oct 29 18:37:45 2009 +0100 + + ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) + + This patch fixes a problem only seen very occasionally on Canyonlands. + The NOR flash interface (CFI driver) doesn't work reliably in all cases. + Erasing and/or programming sometimes doesn't work. Sometimes with + an error message, like "flash not erased" when trying to program an + area that should have just been erased. And sometimes without any error + messages. As mentioned above, this problem was only seen rarely and with + some PLL configuration (CPU speed, EBC speed). + + Now I spotted this problem a few times, when running my Canyonlands with + the following setup (chip_config): + + 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 + + Changing the EBC configuration to not release the bus into high + impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1 + in EBC0_CFG) seems to fix this problem. I haven't seen any failure + anymore with this patch applied. + + Signed-off-by: Stefan Roese + Cc: David Mitchell + Cc: Jeff Mann + +commit 25793f76bf9a7be59c9415ef0f78d034e8d53dae +Author: Remy Bohmer +Date: Thu Oct 29 12:29:37 2009 +0100 + + ARM: Use Linux version for unaligned access code + + The asm-arm/unaligned.h includes linux/unaligned/access_ok.h + This file is unsafe to be used on ARM, since it does an unaligned memory + accesses which fails on ARM. + + Lookin at Linux the basic difference seems to be the header + "include/asm-arm/unaligned.h". The Linux version of "unaligned.h" + does *not* include "access_ok.h" at all. It includes "le_byteshift.h" + and "be_byteshift.h" instead. + + Signed-off-by: Remy Bohmer + Signed-off-by: Stefan Roese + -- + include/asm-arm/unaligned.h | 3 - + include/linux/unaligned/be_byteshift.h | 70 +++++++++++++++++++++++++++++++++ + include/linux/unaligned/le_byteshift.h | 70 +++++++++++++++++++++++++++++++++ + 3 files changed, 142 insertions(+), 1 deletion(-) + create mode 100644 include/linux/unaligned/be_byteshift.h + create mode 100644 include/linux/unaligned/le_byteshift.h + +commit 6d6e7c53d5c75e5e24841c5506f4ed9d82adee09 +Author: Kumar Gala +Date: Wed Nov 4 18:02:10 2009 -0600 + + ppc/85xx: Fix inclusion of 83xx immap in 85xx builds + + The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should + not be including the immap_83xx.h when building 85xx. We can just get + this all from common.h + + Signed-off-by: Kumar Gala + +commit 107b579c75256212d4bf8b99ee8d68e0078f3646 +Author: Becky Bruce +Date: Wed Nov 4 17:34:04 2009 -0600 + + 86xx: Remove redundant code in initdram + + The same code exists both inside an #ifdef and outside of it. + Remove the extra code for all the 86xx boards. + + Signed-off-by: Becky Bruce + Signed-off-by: Kumar Gala + +commit 715d8f7608f77c93f1807a032644893fd5b6d08b +Author: Ed Swarthout +Date: Mon Nov 2 09:05:49 2009 -0600 + + fsl_pci_init_port end-point initialization is broken + + commit 70ed869e broke fsl pcie end-point initialization. + Returning 0 is not correct. The function must return the first free + bus number for the next controller. + + fsl_pci_init() must still be called and a bus allocated even if the + controller is an end-point. + + Signed-off-by: Ed Swarthout + Acked-by: Vivek Mahajan + Signed-off-by: Kumar Gala + +commit 01471d538fb163f472a769f21267d7676c91267c +Author: Kumar Gala +Date: Wed Nov 4 01:29:04 2009 -0600 + + Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support" + + This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc. + + There isn't any need to modify the API for fsl_pci_init_port to pass the + status of host/agent(end-point) status. We can determine that + internally to fsl_pci_init_port. Revert the patch that makes the API + change. + + Signed-off-by: Kumar Gala + +commit ff88229549e08fdd3f9127c1cc4db11a3576250f +Author: Dave Liu +Date: Sat Oct 31 07:59:55 2009 +0800 + + ppc/85xx: Fix misc L2 cache enabling bug + + We need loop-check the flash clear lock and enable bit for L2 cache. + + Signed-off-by: Dave Liu + Signed-off-by: Kumar Gala + +commit 59434fe243962758742af5cb8e2ced976e17c302 +Author: Nobuhiro Iwamatsu +Date: Fri Oct 30 10:16:27 2009 +0900 + + sh: Update lowlevel_init.S of espt-giga + + There was the point that did not use write macro. + Change to write macro. + + Signed-off-by: Nobuhiro Iwamatsu + +commit f1cae1969d9e971fb72827a5731ce7e752464aa2 +Author: Nobuhiro Iwamatsu +Date: Fri Oct 30 10:01:25 2009 +0900 + + sh: Move some defs to convince 'pcrel too far' + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Takashi Yoshii + +commit 0f9eaf4b323ea0ca95944b84c7465b81ba575514 +Author: Nobuhiro Iwamatsu +Date: Thu Oct 15 13:36:34 2009 +0900 + + sh: Remove malloc_bin_reloc from lib_sh, lib_nios2 and lib_nios. + + By "arm/microblaze/nios/nios2/sh: Remove relocation fixups" + (commit: 0630535e2d062dd73c1ceca5c6125c86d1127a49", doesn't need + malloc_bin_reloc function. This commit remove this. + + Signed-off-by: Nobuhiro Iwamatsu + +commit 0775437293a6963cb21244dfae6978cbf67c6bfe +Author: Ben Warren +Date: Wed Oct 21 21:53:39 2009 -0700 + + Fix DM9000 MAC address handling + + Proper behavior is to pull MAC address from NVRAM in the initialization() an + stuff it in dev->address, then program the device from dev->address in + the init() function. + + Signed-off-by: Ben Warren + +commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a +Author: Wolfgang Denk +Date: Wed Oct 28 22:07:56 2009 +0100 + + sbc8349: fix incorrect comment + + The comment for the BR0_PRELIM port size initialization incorrectly + stated 32 bit, while it's actually 16 bit. The code is correct. + + Reported-by: Guenter Koellner + Signed-off-by: Wolfgang Denk + +commit a38f85e180a30b6225808828ded1017b1a5418c6 +Author: Sandeep Paulraj +Date: Wed Oct 28 11:05:03 2009 -0400 + + Fix Compliation warning for TNY-A9260 and TNY-A9G20 + + The patch fixes a compilation warning by defining + CONFIG_SYS_64BIT_VSPRINTF in the config file + + Signed-off-by: Sandeep Paulraj + +commit 264e42ee54f1d322805d9068168fd362b413fd09 +Author: Sandeep Paulraj +Date: Wed Oct 28 11:04:53 2009 -0400 + + Fix Compliation warning for SBC35-A9G20 board + + The patch fixes a compilation warning by defining + CONFIG_SYS_64BIT_VSPRINTF in the config file + + Signed-off-by: Sandeep Paulraj + +commit 353462f6ff9769091fb644d44d8025f20a4192d9 +Author: Eric Millbrandt +Date: Wed Oct 28 09:37:33 2009 -0500 + + galaxy5200: Add default environment variables + + Extend bootdelay to 10 seconds. Set boot retry time to 120 seconds and use + reset to retry. Define default bootcommand and bootargs for production. + + Signed-off-by: Eric Millbrandt + +commit fa36ae790eb10ce70935f9a78f07703719dca422 +Author: Stefan Roese +Date: Tue Oct 27 15:15:55 2009 +0100 + + cfi: Add weak default function for flash_cmd_reset() + + Currently the CFI driver issues both AMD and Intel reset commands. + This is because the driver doesn't know yet which chips are connected. + This dual reset seems to cause problems with the M29W128G chips as + reported by Richard Retanubun. This patch now introduces a weak default + function for the CFI reset command, still with both resets. This can + be overridden by a board specific version if necessary. + + Signed-off-by: Stefan Roese + Cc: Richard Retanubun + +commit 4946775c6db52dba28f72ba3525764b54f1d4593 +Author: Wolfgang Denk +Date: Wed Oct 28 00:49:47 2009 +0100 + + Coding Style cleanup; update CHANGELOG, prepare -rc1 + + Signed-off-by: Wolfgang Denk + commit 246c69225c7b962d5c93e92282b78ca9fc5fefee Author: Peter Tyser Date: Sun Oct 25 15:12:56 2009 -0500 @@ -260,6 +1440,15 @@ Date: Tue Oct 27 09:26:55 2009 +0530 Signed-off-by: Poonam Aggrwal Signed-off-by: Kumar Gala +commit 2c0c58b92dbb68007061bdc0edd23bdf142efebf +Author: Sergey Mironov +Date: Wed Sep 23 16:47:38 2009 +0400 + + Fix bug in jumptable call stubs for SPARC. + + Signed-off-by: Sergey Mironov + Signed-off-by: Daniel Hellstrom + commit 3e303f748cf57fb23e8ec95ab7eac0074be50e2b Author: Anton Vorontsov Date: Thu Oct 15 17:47:04 2009 +0400 diff --git a/Makefile b/Makefile index 10abadfffa..19b5ac0ef0 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 11 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else