From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Date: Mon, 20 Sep 2021 13:37:25 +0000 (+0200)
Subject: usb: ehci-mx6: use phy_type from device tree
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0f513c5975105a8cfdf80cc9862e4c65826ead84;p=u-boot.git

usb: ehci-mx6: use phy_type from device tree

Allow using different PHY interfaces for multiple USB controllers. When no
value is set in DT, we fall back to CONFIG_MXC_USB_PORTSC for now to stay
compatible with current board configurations.

This also adds support for the HSIC mode of the i.MX7.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index c3e4170513..1bd6147c76 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -23,6 +23,7 @@
 #include <asm/mach-types.h>
 #include <power/regulator.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
 
 #include "ehci.h"
 
@@ -435,6 +436,7 @@ struct ehci_mx6_priv_data {
 	struct clk clk;
 	struct phy phy;
 	enum usb_init_type init_type;
+	enum usb_phy_interface phy_type;
 #if !defined(CONFIG_PHY)
 	int portnr;
 	void __iomem *phy_addr;
@@ -443,6 +445,24 @@ struct ehci_mx6_priv_data {
 #endif
 };
 
+static u32 mx6_portsc(enum usb_phy_interface phy_type)
+{
+	switch (phy_type) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		return PORT_PTS_UTMI;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		return PORT_PTS_UTMI | PORT_PTS_PTW;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		return PORT_PTS_ULPI;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		return PORT_PTS_SERIAL;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		return PORT_PTS_HSIC;
+	default:
+		return CONFIG_MXC_USB_PORTSC;
+	}
+}
+
 static int mx6_init_after_reset(struct ehci_ctrl *dev)
 {
 	struct ehci_mx6_priv_data *priv = dev->priv;
@@ -479,7 +499,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 		return 0;
 
 	setbits_le32(&ehci->usbmode, CM_HOST);
-	writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+	writel(mx6_portsc(priv->phy_type), &ehci->portsc);
 	setbits_le32(&ehci->portsc, USB_EN);
 
 	mdelay(10);
@@ -641,6 +661,7 @@ static int ehci_usb_probe(struct udevice *dev)
 
 	priv->ehci = ehci;
 	priv->init_type = type;
+	priv->phy_type = usb_get_phy_mode(dev_ofnode(dev));
 
 #if CONFIG_IS_ENABLED(CLK)
 	ret = clk_get_by_index(dev, 0, &priv->clk);
@@ -690,7 +711,7 @@ static int ehci_usb_probe(struct udevice *dev)
 
 	if (priv->init_type == USB_INIT_HOST) {
 		setbits_le32(&ehci->usbmode, CM_HOST);
-		writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+		writel(mx6_portsc(priv->phy_type), &ehci->portsc);
 		setbits_le32(&ehci->portsc, USB_EN);
 	}
 
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index bf5d26faa5..2cdb3146e8 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -23,6 +23,7 @@
 #define PORT_PTS_ULPI		(2 << 30)
 #define PORT_PTS_SERIAL		(3 << 30)
 #define PORT_PTS_PTW		(1 << 28)
+#define PORT_PTS_HSIC		(1 << 25)
 #define PORT_PFSC		(1 << 24) /* Defined on Page 39-44 of the mpc5151 ERM */
 #define PORT_PTS_PHCD		(1 << 23)
 #define PORT_PP			(1 << 12)