From: Yanhong Wang Date: Thu, 16 Mar 2023 02:53:32 +0000 (+0800) Subject: configs: starfive: add starfive_visionfive2_defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0eff3bf17631889945c89918ea3b97f7c626aef0;p=u-boot.git configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang Tested-by: Conor Dooley --- diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig new file mode 100644 index 0000000000..550d0ff3ab --- /dev/null +++ b/configs/starfive_visionfive2_defconfig @@ -0,0 +1,79 @@ +CONFIG_RISCV=y +CONFIG_SYS_MALLOC_LEN=0x800000 +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_SPL_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000 +CONFIG_SPL_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b" +CONFIG_SPL_TEXT_BASE=0x8000000 +CONFIG_SYS_PROMPT="StarFive #" +CONFIG_DM_RESET=y +CONFIG_SPL_MMC=y +CONFIG_SPL_STACK=0x8180000 +CONFIG_SPL=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_TARGET_STARFIVE_VISIONFIVE2=y +CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000 +CONFIG_ARCH_RV64I=y +CONFIG_CMODEL_MEDANY=y +CONFIG_RISCV_SMODE=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_QSPI_BOOT=y +CONFIG_SD_BOOT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi" +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" +CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2-v1.3b.dtb" +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x0 +CONFIG_SPL_BSS_START_ADDR=0x8040000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x400000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2 +CONFIG_SPL_DM_SPI_FLASH=y +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_JH7110=y +# CONFIG_I2C is not set +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_SNPS=y +CONFIG_SF_DEFAULT_SPEED=100000000 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_SPL_PINCTRL=y +CONFIG_SPL_PINCONF=y +CONFIG_SPL_PINCTRL_STARFIVE=y +CONFIG_SPL_PINCTRL_STARFIVE_JH7110=y +CONFIG_PINCTRL_STARFIVE=y +# CONFIG_RAM_SIFIVE is not set +CONFIG_SYS_NS16550=y +CONFIG_CADENCE_QSPI=y +CONFIG_TIMER_EARLY=y +CONFIG_OF_LIBFDT_OVERLAY=y