From: Marek Vasut <marex@denx.de>
Date: Sat, 1 Aug 2015 17:50:56 +0000 (+0200)
Subject: ddr: altera: sdram: Clean up set_sdr_addr_rw()
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0ef88300379bb13b8de6c309ae60c9ca255dcc8d;p=u-boot.git

ddr: altera: sdram: Clean up set_sdr_addr_rw()

Get rid of the constant clrsetbits_le32(), instead prepare the whole
content of the register once and write it at the end of the function.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/drivers/ddr/altera/sdram.c b/drivers/ddr/altera/sdram.c
index f4f3545dad..143f41b11d 100644
--- a/drivers/ddr/altera/sdram.c
+++ b/drivers/ddr/altera/sdram.c
@@ -371,34 +371,24 @@ static void set_sdr_dram_timing(void)
 
 static void set_sdr_addr_rw(void)
 {
-	int rows;
-
-	debug("Configuring DRAMADDRW\n");
-	clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK,
-			CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS <<
-			SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB);
 	/*
 	 * SDRAM Failure When Accessing Non-Existent Memory
-	 * Update Preloader to artificially increase the number of rows so
-	 * that the memory thinks it has 4GB of RAM.
-	 */
-	rows = get_errata_rows();
-
-	clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK,
-			rows << SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB);
-
-	clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK,
-			CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS <<
-			SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB);
-	/* SDRAM Failure When Accessing Non-Existent Memory
 	 * Set SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB to
 	 * log2(number of chip select bits). Since there's only
 	 * 1 or 2 chip selects, log2(1) => 0, and log2(2) => 1,
 	 * which is the same as "chip selects" - 1.
 	 */
-	clrsetbits_le32(&sdr_ctrl->dram_addrw, SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK,
-			(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS - 1) <<
+	const int rows = get_errata_rows();
+	const u32 dram_addrw =
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS <<
+			SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB)	|
+		(rows << SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB)	|
+		(CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS <<
+			SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB)	|
+		((CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS - 1) <<
 			SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB);
+	debug("Configuring DRAMADDRW\n");
+	writel(dram_addrw, &sdr_ctrl->dram_addrw);
 }
 
 static void set_sdr_static_cfg(void)