From: Paul Kocialkowski <contact@paulk.fr>
Date: Mon, 20 Jul 2015 13:17:17 +0000 (+0200)
Subject: sniper: Power off when the power on reason is not a valid one
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0e14f88957459aec113b75032ff9364c81dab864;p=u-boot.git

sniper: Power off when the power on reason is not a valid one

In most cases, userspace will attempt to power off the device with HALT instead
of POWER_OFF, which triggers a reset instead of a proper power off from the
TWL4030. Hence, it is up to the bootloader to actually turn the device off when
there is no reason to turn it on.

A reboot identified with the OMAP reboot mode bits set is acceptable, as well as
a power on reason from either the power button, USB or charger plug.

Other cases should trigger a power off. Note that for the U-Boot reset command
to take effect, we have to fill-in the OMAP reboot bits.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/lge/sniper/sniper.c b/board/lge/sniper/sniper.c
index 97c2ed0554..c94a3fa427 100644
--- a/board/lge/sniper/sniper.c
+++ b/board/lge/sniper/sniper.c
@@ -94,6 +94,7 @@ int misc_init_r(void)
 	char serial_string[17] = { 0 };
 	char reboot_mode[2] = { 0 };
 	u32 dieid[4] = { 0 };
+	unsigned char data = 0;
 
 	/* Power button reset init */
 
@@ -107,6 +108,18 @@ int misc_init_r(void)
 			setenv("reboot-mode", (char *)reboot_mode);
 
 		omap_reboot_mode_clear();
+	} else {
+		/*
+		 * When not rebooting, valid power on reasons are either the
+		 * power button, charger plug or USB plug.
+		 */
+
+		data |= twl4030_input_power_button();
+		data |= twl4030_input_charger();
+		data |= twl4030_input_usb();
+
+		if (!data)
+			twl4030_power_off();
 	}
 
 	/* Serial number */
@@ -145,6 +158,11 @@ void get_board_serial(struct tag_serialnr *serialnr)
 	}
 }
 
+void reset_misc(void)
+{
+	omap_reboot_mode_store('u');
+}
+
 int fb_set_reboot_flag(void)
 {
 	return omap_reboot_mode_store('b');