From: Yuantian Tang <andy.tang@nxp.com>
Date: Mon, 4 Nov 2019 07:10:45 +0000 (+0800)
Subject: armv8: ls1028a: Add environment variables to facilitate the boot
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0de19abc14a3431d4e556d8c96da64fd41100467;p=u-boot.git

armv8: ls1028a: Add environment variables to facilitate the boot

Add some environment variables to facilitate the auto boot.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 09fc333810..4bd510d42e 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -69,6 +69,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
 	func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
 
@@ -129,25 +130,46 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"sd_bootcmd=echo Trying load from SD ..;"	\
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
+		"&& hdp load $load_addr 0x2000\0"	\
 	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
 		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
 
 #undef CONFIG_BOOTCOMMAND
 
+#define XSPI_NOR_BOOTCOMMAND	\
+	"run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \
+	"env exists secureboot && esbc_halt;;"
 #define SD_BOOTCOMMAND	\
-	"run distro_bootcmd;run sd_bootcmd; " \
+	"run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
+	"env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND	\
+	"run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
 	"env exists secureboot && esbc_halt;"
 
 /* Monitor Command Prompt */