From: Heinrich Schuchardt Date: Wed, 14 Feb 2018 07:05:44 +0000 (+0100) Subject: cmd: scsi: move CMD_SCSI to device access commands X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0c3fecd0bf8e36af8e53f3213f141d98c2907455;p=u-boot.git cmd: scsi: move CMD_SCSI to device access commands Configuration option CMD_SCSI should be placed in the same submenu as CMD_SATA and CMD_MMC. Signed-off-by: Heinrich Schuchardt --- diff --git a/cmd/Kconfig b/cmd/Kconfig index 7c51749398..885712f00f 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -877,6 +877,15 @@ config CMD_SAVES Provides a way to save a binary file using the Motorola S-Record format over the serial line. +config CMD_SCSI + bool "scsi - Access to SCSI devices" + default y if SCSI + help + This provides a 'scsi' command which provides access to SCSI (Small + Computer System Interface) devices. The command provides a way to + scan the bus, reset the bus, read and write data and get information + about devices. + config CMD_SDRAM bool "sdram - Print SDRAM configuration information" help @@ -1466,15 +1475,6 @@ config CMD_REISER reiserls - list files reiserload - load a file -config CMD_SCSI - bool "scsi - Access to SCSI devices" - default y if SCSI - help - This provides a 'scsi' command which provides access to SCSI (Small - Computer System Interface) devices. The command provides a way to - scan the bus, reset the bus, read and write data and get information - about devices. - config CMD_YAFFS2 bool "yaffs2 - Access of YAFFS2 filesystem" depends on YAFFS2