From: Beniamino Galvani Date: Tue, 14 Aug 2018 13:07:52 +0000 (+0200) Subject: boards: amlogic: remove ethernet gpio reset code from boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0b600918d5fecec3a31ee54d80e5e0484de34f46;p=u-boot.git boards: amlogic: remove ethernet gpio reset code from boards The reset is already handled by the designware driver using information from device tree. Signed-off-by: Beniamino Galvani Acked-by: Neil Armstrong --- diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c index 339dbb81db..ae29dd6fa4 100644 --- a/board/amlogic/nanopi-k2/nanopi-k2.c +++ b/board/amlogic/nanopi-k2/nanopi-k2.c @@ -30,12 +30,6 @@ int misc_init_r(void) meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index c47b9ce9cb..2a2755c387 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -30,12 +30,6 @@ int misc_init_r(void) meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);