From: Dave Liu Date: Wed, 16 Dec 2009 16:24:36 +0000 (-0600) Subject: fsl-ddr: Fix power-down timing settings X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0a71c92c7e1e565111cb34cd389a21ec500ca5c1;p=u-boot.git fsl-ddr: Fix power-down timing settings 1. TIMING_CFG_0[ACT_PD_EXIT] was set to 6 clocks, but It should be set to tXP parameter, tXP=max(3CK, 7.5ns) 2. TIMING_CFG_0[PRE_PD_EXIT] was set to 6 clocks, but It should be set to tXP (if MR0[A12]=1) else to tXPDLL parameter We are setting the mode register MR0[A12]='1' Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c index 2505041450..a92f1a330b 100644 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -188,12 +188,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) * The DDR3 spec has not tXARD, * we use the tXP instead of it. * tXP=max(3nCK, 7.5ns) for DDR3. - * we use the tXP=6 * spec has not the tAXPD, we use * tAXPD=8, need design to confirm. */ - act_pd_exit_mclk = 6; - pre_pd_exit_mclk = 6; + int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ + act_pd_exit_mclk = picos_to_mclk(tXP); + /* Mode register MR0[A12] is '1' - fast exit */ + pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 8; tmrd_mclk = 4; #else /* CONFIG_FSL_DDR2 */