From: Masahiro Yamada Date: Tue, 28 Jan 2014 09:06:12 +0000 (+0900) Subject: mini2440.h: Delete remainder of dead board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0a4bce32d6ad65ffd1eb23533d66dfe2184c0eb1;p=u-boot.git mini2440.h: Delete remainder of dead board Commit af5b9b1f removed mini2440 board support, but missed to delete include/configs/mini2440.h. Signed-off-by: Masahiro Yamada --- diff --git a/include/configs/mini2440.h b/include/configs/mini2440.h deleted file mode 100644 index 5e9e98d2fc..0000000000 --- a/include/configs/mini2440.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * Gary Jennejohn - * David Mueller - * - * (C) Copyright 2009-2010 - * Michel Pollet - * - * (C) Copyright 2012 - * Gabriel Huau - * - * Configuation settings for the MINI2440 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_S3C2440_GPIO - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24X0 SoC */ -#define CONFIG_S3C2440 /* in a SAMSUNG S3C2440 SoC */ -#define CONFIG_MINI2440 /* on a MIN2440 Board */ - -#define MACH_TYPE_MINI2440 1999 -#define CONFIG_MACH_TYPE MACH_TYPE_MINI2440 - -/* - * We don't use lowlevel_init - */ -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F - -/* - * input clock of PLL - */ -/* MINI2440 has 12.0000MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048*1024) - -/* - * Hardware drivers - */ -#define CONFIG_DRIVER_DM9000 -#define CONFIG_DRIVER_DM9000_NO_EEPROM -#define CONFIG_DM9000_BASE 0x20000300 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE+4) - -/* - * select serial console configuration - */ -#define CONFIG_S3C24X0_SERIAL -#define CONFIG_SERIAL1 - -/* - * allow to overwrite serial and ethaddr - */ -#define CONFIG_ENV_OVERWRITE - -/* - * Command definition - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES - -/* - * Miscellaneous configurable options - */ -#define CONFIG_LONGHELP -#define CONFIG_SYS_PROMPT "MINI2440 => " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x30000000 -#define CONFIG_SYS_MEMTEST_END 0x34000000 /* 64MB in DRAM */ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x32000000 - -/* boot parameters address */ -#define CONFIG_BOOT_PARAM_ADDR 0x30000100 - -/* - * the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need - * it to wrap 100 times (total 1562500) to get 1 sec. - */ -#define CONFIG_SYS_HZ 1562500 - -/* - * valid baudrates - */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BAUDRATE 115200 - -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_SIZE (64*1024*1024) /* 64MB of DRAM */ -#define CONFIG_SYS_SDRAM_BASE 0x30000000 -#define CONFIG_SYS_FLASH_BASE 0x0 - -/* - * Stack should be on the SRAM because - * DRAM is not init - */ -#define CONFIG_SYS_INIT_SP_ADDR (0x40001000 - GENERATED_GBL_DATA_SIZE) - -/* - * NOR FLASH organization - * Now uses the standard CFI interface - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_MONITOR_BASE 0x0 -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* 512 * 4096 sectors, or 32 * 64k blocks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_FLASH_SHOW_PROGRESS 1 - -/* - * Config for NOR flash - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_MY_ENV_OFFSET 0x40000 -/* addr of environment */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_MY_ENV_OFFSET) -/* 16k Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -#endif /* __CONFIG_H */