From: Marco Franchi <marco.franchi@nxp.com>
Date: Fri, 10 Jun 2016 17:45:28 +0000 (-0300)
Subject: warp7: Fix watchdog reset
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0a35cc9395b7e4e5bc2b1370016f7c3156f945a4;p=u-boot.git

warp7: Fix watchdog reset

The latest version of warp7 board provides the connection of the
WDOG1_B pin to the PMIC.

Program the watchdog to enable the WDOG1_B output which causes
a POR reset.

Based on the imx7dsabresd code.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index 8c5bf9a524..27e31f35d5 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -32,6 +32,10 @@ int dram_init(void)
 	return 0;
 }
 
+static iomux_v3_cfg_t const wdog_pads[] = {
+	MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
 static iomux_v3_cfg_t const uart1_pads[] = {
 	MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
@@ -100,3 +104,20 @@ int board_usb_phy_mode(int port)
 {
 	return USB_INIT_DEVICE;
 }
+
+int board_late_init(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+	set_wdog_reset(wdog);
+
+	/*
+	 * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
+	 * since we use PMIC_PWRON to reset the board.
+	 */
+	clrsetbits_le16(&wdog->wcr, 0, 0x10);
+
+	return 0;
+}
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index f112fa5f16..8b9ed2b032 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -19,6 +19,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR