From: Andre Przywara <andre.przywara@arm.com>
Date: Wed, 5 Apr 2023 20:30:11 +0000 (+0100)
Subject: sunxi: arm64: boot0.h: runtime check for RVBAR address
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0a137ac5015933bf38ea2700abe70602ef63bbdd;p=u-boot.git

sunxi: arm64: boot0.h: runtime check for RVBAR address

Some SoCs of the H616 family use a die variant, that puts some CPU power
and reset control registers at a different address. There are examples
of two instances of the same board, using different die revisions of the
otherwise same H313 SoC. We need to write to a register in that block
*very* early in the SPL boot, to switch the core to AArch64.

Since the devices are otherwise indistinguishable, let the SPL code read
that die variant and use the respective RVBAR address based on that.
That is a bit tricky, since we need to do that in hand-coded AArch32
machine language, shared by all 64-bit SoCs. To avoid build dependencies
in this mess, we always provide two addresses to choose from, and just
give identical values for all other SoCs. This allows the same code to
run on all 64-bit SoCs, and controls this switch behaviour purely from
Kconfig.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---

diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h
index 59ea75a96b..30f5680757 100644
--- a/arch/arm/include/asm/arch-sunxi/boot0.h
+++ b/arch/arm/include/asm/arch-sunxi/boot0.h
@@ -16,8 +16,8 @@
 	b       reset
 	.space  0x7c
 
-	.word	0xe28f0058	// add     r0, pc, #88
-	.word	0xe59f1054	// ldr     r1, [pc, #84]
+	.word	0xe28f0070	// add     r0, pc, #112	 // @(fel_stash - .)
+	.word	0xe59f106c	// ldr     r1, [pc, #108] // fel_stash - .
 	.word	0xe0800001	// add     r0, r0, r1
 	.word	0xe580d000	// str     sp, [r0]
 	.word	0xe580e004	// str     lr, [r0, #4]
@@ -28,8 +28,12 @@
 	.word	0xee1cef10	// mrc     15, 0, lr, cr12, cr0, {0}
 	.word	0xe580e010	// str     lr, [r0, #16]
 
-	.word	0xe59f1024	// ldr     r1, [pc, #36] ; 0x170000a0
-	.word	0xe59f0024	// ldr     r0, [pc, #36] ; CONFIG_*_TEXT_BASE
+	.word	0xe59f1034	// ldr     r1, [pc, #52] ; RVBAR_ADDRESS
+	.word	0xe59f0034	// ldr     r0, [pc, #52] ; SUNXI_SRAMC_BASE
+	.word	0xe5900024	// ldr     r0, [r0, #36] ; SRAM_VER_REG
+	.word	0xe21000ff	// ands    r0, r0, #255    ; 0xff
+	.word	0x159f102c	// ldrne   r1, [pc, #44] ; RVBAR_ALTERNATIVE
+	.word	0xe59f002c	// ldr     r0, [pc, #44] ; CONFIG_*TEXT_BASE
 	.word	0xe5810000	// str     r0, [r1]
 	.word	0xf57ff04f	// dsb     sy
 	.word	0xf57ff06f	// isb     sy
@@ -41,6 +45,8 @@
 	.word	0xeafffffd	// b       @wfi
 
 	.word	CONFIG_SUNXI_RVBAR_ADDRESS	// writable RVBAR mapping addr
+	.word	SUNXI_SRAMC_BASE
+	.word	CONFIG_SUNXI_RVBAR_ALTERNATIVE	// address for die variant
 #ifdef CONFIG_SPL_BUILD
 	.word	CONFIG_SPL_TEXT_BASE
 #else
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 71a413108f..6dcbb096f7 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -141,6 +141,20 @@ config SUNXI_RVBAR_ADDRESS
 	entry point when switching to AArch64. This store is on different
 	addresses, depending on the SoC.
 
+config SUNXI_RVBAR_ALTERNATIVE
+	hex
+	depends on ARM64
+	default 0x08100040 if MACH_SUN50I_H616
+	default SUNXI_RVBAR_ADDRESS
+	---help---
+	The H616 die exists in at least two variants, with one having the
+	RVBAR registers at a different address. If the SoC variant ID
+	(stored in SRAM_VER_REG[7:0]) is not 0, we need to use the
+	other address.
+	Set this alternative address to the same as the normal address
+	for all other SoCs, so the content of the SRAM_VER_REG becomes
+	irrelevant there, and we can use the same code.
+
 config SUNXI_A64_TIMER_ERRATUM
 	bool