From: Pali Rohár Date: Mon, 14 Feb 2022 10:34:30 +0000 (+0100) Subject: arm: a37xx: Update DTS files to version from upstream Linux kernel X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0934dddc643644ccf6e9203c8925c5573dd7779c;p=u-boot.git arm: a37xx: Update DTS files to version from upstream Linux kernel This change updates all Armada 37xx DTS files to version which is used by Linux kernel v5.18. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/arch/arm/dts/armada-371x.dtsi b/arch/arm/dts/armada-371x.dtsi index c9e5325b8a..dc1182ec9f 100644 --- a/arch/arm/dts/armada-371x.dtsi +++ b/arch/arm/dts/armada-371x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 371x family of SoCs * (also named 88F3710) @@ -6,43 +7,6 @@ * * Gregory CLEMENT * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts index 6272d83fc0..3e5789f372 100644 --- a/arch/arm/dts/armada-3720-db.dts +++ b/arch/arm/dts/armada-3720-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 3720 development board * (DB-88F3720-DDR3) @@ -5,47 +6,14 @@ * * Gregory CLEMENT * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * This file is compatible with the version 1.4 and the version 2.0 of + * the board, however the CON numbers are different between the 2 + * version */ /dts-v1/; +#include #include "armada-372x.dtsi" / { @@ -56,52 +24,118 @@ stdout-path = "serial0:115200n8"; }; - aliases { - ethernet0 = ð0; - i2c0 = &i2c0; - spi0 = &spi0; - }; - - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; -}; -&comphy { - phy0 { - phy-type = ; - phy-speed = ; + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; }; - phy1 { - phy-type = ; - phy-speed = ; + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vcc_sd_reg2: regulator-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; }; }; +/* Gigabit module on CON19(V2.0)/CON21(V1.4) */ ð0 { pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +/* Gigabit module on CON18(V2.0)/CON20(V1.4) */ +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; status = "okay"; - phy-mode = "rgmii"; }; &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; }; -/* CON3 */ -&sata { +&mdio { status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; }; -&sdhci1 { - bus-width = <4>; +/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ +&pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* CON3 */ +&sata { status = "okay"; }; @@ -111,16 +145,18 @@ mmc-ddr-1_8v; mmc-hs400-1_8v; marvell,pad-type = "fixed-1-8v"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; +}; - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; +/* SD slot module on CON14(V2.0)/CON15(V1.4) */ +&sdhci1 { + wp-inverted; + cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + vmmc-supply = <&vcc_sd_reg2>; + status = "okay"; }; &spi0 { @@ -128,37 +164,57 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition@210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; }; }; -/* Exported on the micro USB connector CON32 through an FTDI */ +/* + * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through + * an FTDI (also on CON24(V2.0)/CON26(V1.4)). + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; status = "okay"; }; -/* CON29 */ -&usb2 { +/* CON26(V2.0)/CON28(V1.4) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; status = "okay"; }; -/* CON31 */ -&usb3 { +/* CON27(V2.0)/CON29(V1.4) */ +&usb2 { status = "okay"; }; -/* CON17 */ -&pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; +/* CON29(V2.0)/CON31(V1.4) */ +&usb3 { status = "okay"; + usb-phy = <&usb3_phy>; }; diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index c0e0e13953..1542d836c0 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -1,177 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree file for Marvell Armada 3720 community board - * (ESPRESSOBin) + * Device Tree file for Globalscale Marvell ESPRESSOBin Board * Copyright (C) 2016 Marvell * - * Gregory CLEMENT - * Konstantin Porotchkin + * Romain Perier * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf */ /dts-v1/; -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = ð0; - i2c0 = &i2c0; - spi0 = &spi0; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg0: regulator@0 { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - states = <1800000 0x1 - 3300000 0x0>; - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - }; -}; - -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii"; - phy_addr = <0x1>; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -/* CON3 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; -}; - -&sdhci1 { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vcc_sd_reg0>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector CON32 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* CON29 */ -&usb2 { - status = "okay"; -}; - -/* CON31 */ -&usb3 { - status = "okay"; - phys = <&comphy0 0>; -}; - -&pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - status = "okay"; - phys = <&comphy1 0>; }; diff --git a/arch/arm/dts/armada-3720-espressobin.dtsi b/arch/arm/dts/armada-3720-espressobin.dtsi new file mode 100644 index 0000000000..5fc613d241 --- /dev/null +++ b/arch/arm/dts/armada-3720-espressobin.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier + * + */ + +#include +#include "armada-372x.dtsi" + +/ { + aliases { + ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + led2: gpio-led2 { + /* led2 is working only on v7 board */ + status = "disabled"; + + compatible = "gpio-leds"; + + led2 { + label = "led2"; + gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; +}; + +/* J6 */ +&sata { + status = "okay"; +}; + +/* U11 */ +&sdhci0 { + /* Main DTS file for Espressobin is without eMMC */ + status = "disabled"; + + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0port0: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0port1: port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + switch0port2: port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts index a5ccb558cc..1fc4a30d03 100644 --- a/arch/arm/dts/armada-3720-turris-mox.dts +++ b/arch/arm/dts/armada-3720-turris-mox.dts @@ -1,18 +1,14 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for CZ.NIC Turris Mox Board - * 2018 by Marek Behun - * - * Based on armada-3720-espressobin.dts by: - * Gregory CLEMENT - * Konstantin Porotchkin + * 2019 by Marek Behún */ /dts-v1/; +#include #include #include -#include #include "armada-372x.dtsi" / { @@ -20,29 +16,29 @@ compatible = "cznic,turris-mox", "marvell,armada3720", "marvell,armada3710"; - chosen { - stdout-path = "serial0:115200n8"; - }; - aliases { + spi0 = &spi0; ethernet0 = ð0; ethernet1 = ð1; - i2c0 = &i2c0; - spi0 = &spi0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; leds { compatible = "gpio-leds"; - - led { + red { + label = "mox:red:activity"; gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "default-on"; }; }; @@ -50,7 +46,6 @@ compatible = "gpio-keys"; reset { - compatible = "gpio-keys"; label = "reset"; linux,code = ; gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; @@ -58,16 +53,14 @@ }; }; - reg_usb3_vbus: usb3_vbus@0 { + exp_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - startup-delay-us = <2000000>; - shutdown-delay-us = <1000000>; - gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + regulator-always-on; + gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; }; vsdc_reg: vsdc-reg { @@ -84,42 +77,105 @@ enable-active-high; }; - mdio { - #address-cells = <1>; - #size-cells = <0>; + vsdio_reg: vsdio-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; - eth_phy1: ethernet-phy@1 { - reg = <1>; - }; + gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; }; -}; -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii"; - phy = <ð_phy1>; -}; + sdhci1_pwrseq: sdhci1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; -ð1 { - phy-mode = "2500base-x"; - phys = <&comphy0 1>; + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + + /* enabled by U-Boot if SFP module is present */ + status = "disabled"; + }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm"; + }; + }; }; &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + /delete-property/ mrvl,i2c-fast-mode; status = "okay"; - #address-cells = <1>; - #size-cells = <0>; rtc@6f { - compatible = "microchip,mcp7941x"; + compatible = "microchip,mcp7940x"; reg = <0x6f>; }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + status = "okay"; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM. Controller supports 32-bit IO mapping. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ + + /* enabled by U-Boot if PCIe module is present */ + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + status = "okay"; +}; + +ð1 { + phy-mode = "2500base-x"; + managed = "in-band-status"; + phys = <&comphy0 1>; +}; + &sdhci0 { wp-inverted; bus-width = <4>; @@ -129,17 +185,23 @@ status = "okay"; }; -&pinctrl_nb { - spi_cs1_pins: spi-cs1-pins { - groups = "spi_cs1"; - function = "spi"; - }; +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + non-removable; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vsdio_reg>; + mmc-pwrseq = <&sdhci1_pwrseq>; + /* forbid SDR104 for FCC purposes */ + sdhci-caps-mask = <0x2 0x0>; + status = "okay"; }; &spi0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&spi_cs1_pins>; + pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; assigned-clocks = <&nb_periph_clk 7>; assigned-clock-parents = <&tbg 1>; assigned-clock-rates = <20000000>; @@ -147,10 +209,9 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,s25fl064l", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; - m25p,fast-read; partitions { compatible = "fixed-partitions"; @@ -184,38 +245,621 @@ }; }; - moxtet@1 { + moxtet: moxtet@1 { #address-cells = <1>; #size-cells = <0>; compatible = "cznic,moxtet"; reg = <1>; reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; - spi-max-frequency = <1000000>; + spi-max-frequency = <10000000>; spi-cpol; spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + status = "disabled"; + }; }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; +&usb2 { status = "okay"; }; -&usb2 { - status = "okay"; +&comphy2 { + connector { + compatible = "usb-a-connector"; + phy-supply = <&exp_usb3_vbus>; + }; }; &usb3 { - vbus-supply = <®_usb3_vbus>; status = "okay"; phys = <&comphy2 0>; }; -&pcie0 { +&mdio { pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - status = "disabled"; - phys = <&comphy1 0>; + pinctrl-0 = <&smi_pins>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + /* switch nodes are enabled by U-Boot if modules are present */ + switch0@10 { + compatible = "marvell,mv88e6190"; + reg = <0x10 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <0x9>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + switch0port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port9 &switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch0@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1_topaz: switch0phy1@11 { + reg = <0x11>; + }; + + switch0phy2_topaz: switch0phy2@12 { + reg = <0x12>; + }; + + switch0phy3_topaz: switch0phy3@13 { + reg = <0x13>; + }; + + switch0phy4_topaz: switch0phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð1>; + }; + }; + }; + + switch1@11 { + compatible = "marvell,mv88e6190"; + reg = <0x11 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy1@1 { + reg = <0x1>; + }; + + switch1phy2: switch1phy2@2 { + reg = <0x2>; + }; + + switch1phy3: switch1phy3@3 { + reg = <0x3>; + }; + + switch1phy4: switch1phy4@4 { + reg = <0x4>; + }; + + switch1phy5: switch1phy5@5 { + reg = <0x5>; + }; + + switch1phy6: switch1phy6@6 { + reg = <0x6>; + }; + + switch1phy7: switch1phy7@7 { + reg = <0x7>; + }; + + switch1phy8: switch1phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan13"; + phy-handle = <&switch1phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan14"; + phy-handle = <&switch1phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan15"; + phy-handle = <&switch1phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan16"; + phy-handle = <&switch1phy8>; + }; + + switch1port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + + switch1port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch1@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1_topaz: switch1phy1@11 { + reg = <0x11>; + }; + + switch1phy2_topaz: switch1phy2@12 { + reg = <0x12>; + }; + + switch1phy3_topaz: switch1phy3@13 { + reg = <0x13>; + }; + + switch1phy4_topaz: switch1phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + }; + }; + + switch2@12 { + compatible = "marvell,mv88e6190"; + reg = <0x12 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1: switch2phy1@1 { + reg = <0x1>; + }; + + switch2phy2: switch2phy2@2 { + reg = <0x2>; + }; + + switch2phy3: switch2phy3@3 { + reg = <0x3>; + }; + + switch2phy4: switch2phy4@4 { + reg = <0x4>; + }; + + switch2phy5: switch2phy5@5 { + reg = <0x5>; + }; + + switch2phy6: switch2phy6@6 { + reg = <0x6>; + }; + + switch2phy7: switch2phy7@7 { + reg = <0x7>; + }; + + switch2phy8: switch2phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan21"; + phy-handle = <&switch2phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan22"; + phy-handle = <&switch2phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan23"; + phy-handle = <&switch2phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan24"; + phy-handle = <&switch2phy8>; + }; + + switch2port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch2@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = ; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1_topaz: switch2phy1@11 { + reg = <0x11>; + }; + + switch2phy2_topaz: switch2phy2@12 { + reg = <0x12>; + }; + + switch2phy3_topaz: switch2phy3@13 { + reg = <0x13>; + }; + + switch2phy4_topaz: switch2phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + }; + }; }; diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts index 319fbe7348..95d46e8d08 100644 --- a/arch/arm/dts/armada-3720-uDPU.dts +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -3,30 +3,23 @@ * Device tree for the uDPU board. * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) * Copyright (C) 2016 Marvell - * Copyright (C) 2018 Methode - * Copyright (C) 2018 Telus + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus * * Vladimir Vid */ /dts-v1/; -#include "armada-37xx.dtsi" -#include "armada-3720-uDPU-u-boot.dtsi" +#include +#include "armada-372x.dtsi" / { model = "Methode uDPU Board"; - compatible = "methode,udpu"; + compatible = "methode,udpu", "marvell,armada3720"; chosen { stdout-path = "serial0:115200n8"; - bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000"; - }; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - spi0 = &spi0; }; memory@0 { @@ -34,56 +27,39 @@ reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; - mdio: mdio@32004 { - #address-cells = <1>; - #size-cells = <0>; - ethphy0: ethernet-phy@0 { - reg = <0>; + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; }; - ethphy1: ethernet-phy@1 { - reg = <1>; + + power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; }; - }; - scsi: scsi { - compatible = "marvell,mvebu-scsi"; - #address-cells = <1>; - #size-cells = <1>; - max-id = <1>; - max-lun = <1>; - status = "okay"; - }; + network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; - i2c1: i2c@11080 { - compatible = "marvell,armada-3700-i2c", "simple-bus"; - reg = <0x0 0x11080 0x0 0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - #address-cells = <2>; - #size-cells = <2>; - status = "okay"; - }; + network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; - uart1: serial@12200 { - compatible = "marvell,armada-3700-uart-ext"; - reg = <0x0 0x12200 0x0 0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - interrupts = ; - status = "okay"; - #address-cells = <2>; - #size-cells = <2>; - }; + alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; - vcc_sd_reg0: regulator@0 { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - states = <1800000 0x1 - 3300000 0x0>; - gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; }; sfp_eth0: sfp-eth0 { @@ -93,40 +69,29 @@ mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; sfp_eth1: sfp-eth1 { compatible = "sff,sfp"; i2c-bus = <&i2c1>; - sfp,ethernet = <ð1>; los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; }; -ð0 { - pinctrl-0 = <&pcie_pins>; - status = "okay"; - phy-mode = "sgmii"; - managed = "in-band-status"; - phy = <ðphy0>; - phys = <&comphy1 0>; -}; - -ð1 { +&sdhci0 { status = "okay"; - phy-mode = "sgmii"; - managed = "in-band-status"; - phy = <ðphy1>; - phys = <&comphy0 1>; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; }; &spi0 { @@ -134,47 +99,90 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q1024a","n25q512a"; + m25p80@0 { + compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - m25p,fast-read; - - partition@0 { - label = "uboot"; - reg = <0 0x400000>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + /* only bootloader is located on the SPI */ + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; }; }; }; -&sdhci0 { - non-removable; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - bus-width = <4>; - vqmmc-supply = <&vcc_sd_reg0>; - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; +&pinctrl_nb { + i2c1_recovery_pins: i2c1-recovery-pins { + groups = "i2c1"; + function = "gpio"; + }; + + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c0 { status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + lm75@48 { + status = "okay"; + compatible = "lm75"; + reg = <0x48>; + }; + + lm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; +ð0 { + phy-mode = "sgmii"; status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; + sfp = <&sfp_eth0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; }; &usb3 { status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm/dts/armada-372x.dtsi b/arch/arm/dts/armada-372x.dtsi index 5120296596..5ce55bdbb9 100644 --- a/arch/arm/dts/armada-372x.dtsi +++ b/arch/arm/dts/armada-372x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 372x family of SoCs * (also named 88F3720) @@ -6,43 +7,6 @@ * * Gregory CLEMENT * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" @@ -52,10 +16,11 @@ compatible = "marvell,armada3720", "marvell,armada3710"; cpus { - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x1>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi index 8ac481cb58..9fa6457fac 100644 --- a/arch/arm/dts/armada-37xx.dtsi +++ b/arch/arm/dts/armada-37xx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 37xx family of SoCs. * @@ -5,48 +6,9 @@ * * Gregory CLEMENT * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include -#include -#include / { model = "Marvell Armada 37xx SoC"; @@ -57,15 +19,32 @@ aliases { serial0 = &uart0; + serial1 = &uart1; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; @@ -77,14 +56,15 @@ timer { compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; }; soc { @@ -93,53 +73,123 @@ #size-cells = <2>; ranges; - internal-regs { + internal-regs@d0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; /* 32M internal register @ 0xd000_0000 */ ranges = <0x0 0x0 0xd0000000 0x2000000>; + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0xA00>; + clocks = <&nb_periph_clk 7>; + interrupts = ; + num-cs = <4>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11000 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 10>; + interrupts = ; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11080 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 9>; + interrupts = ; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; - interrupts = ; + reg = <0x12000 0x18>; + clocks = <&xtalclk>; + interrupts = + , + , + ; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; status = "disabled"; }; - wdt: watchdog-timer@8300 { - compatible = "marvell,armada-3700-wdt"; - reg = <0x8300 0x40>; + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&xtalclk>; + interrupts = + , + ; + interrupt-names = "uart-tx", "uart-rx"; + status = "disabled"; }; nb_periph_clk: nb-periph-clk@13000 { - compatible = "marvell,armada-3700-periph-clock-nb"; + compatible = "marvell,armada-3700-periph-clock-nb", + "syscon"; reg = <0x13000 0x100>; - clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; #clock-cells = <1>; }; sb_periph_clk: sb-periph-clk@18000 { compatible = "marvell,armada-3700-periph-clock-sb"; reg = <0x18000 0x100>; - clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; #clock-cells = <1>; }; tbg: tbg@13200 { compatible = "marvell,armada-3700-tbg-clock"; reg = <0x13200 0x100>; + clocks = <&xtalclk>; #clock-cells = <1>; }; - pinctrl_nb: pinctrl-nb@13800 { + pinctrl_nb: pinctrl@13800 { compatible = "marvell,armada3710-nb-pinctrl", - "syscon", "simple-mfd"; + "syscon", "simple-mfd"; reg = <0x13800 0x100>, <0x13C00 0x20>; - gpionb: gpionb { + /* MPP1[19:0] */ + gpionb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_nb 0 0 36>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = , , @@ -153,7 +203,12 @@ , , ; + }; + xtalclk: xtal-clk { + compatible = "marvell,armada-3700-xtal-clock"; + clock-output-names = "xtal"; + #clock-cells = <0>; }; spi_quad_pins: spi-quad-pins { @@ -161,6 +216,11 @@ function = "spi"; }; + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + i2c1_pins: i2c1-pins { groups = "i2c1"; function = "i2c"; @@ -187,14 +247,54 @@ }; }; - pinctrl_sb: pinctrl-sb@18800 { + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&xtalclk>; + clock-names = "xtal"; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", - "syscon", "simple-mfd"; + "syscon", "simple-mfd"; reg = <0x18800 0x100>, <0x18C00 0x20>; - gpiosb: gpiosb { + /* MPP2[23:0] */ + gpiosb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = , , @@ -218,30 +318,92 @@ function = "sdio"; }; - pcie_pins: pcie-pins { - groups = "pcie1"; + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; /* this actually controls "pcie1_reset" */ function = "gpio"; }; + + pcie_clkreq_pins: pcie-clkreq-pins { + groups = "pcie1_clkreq"; + function = "pcie"; + }; + }; + + eth0: ethernet@30000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x30000 0x4000>; + interrupts = ; + clocks = <&sb_periph_clk 8>; + status = "disabled"; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x32004 0x4>; + }; + + eth1: ethernet@40000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x40000 0x4000>; + interrupts = ; + clocks = <&sb_periph_clk 7>; + status = "disabled"; }; usb3: usb@58000 { compatible = "marvell,armada3700-xhci", "generic-xhci"; reg = <0x58000 0x4000>; - interrupts = ; + marvell,usb-misc-reg = <&usb32_syscon>; + interrupts = ; + clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; }; + usb2_utmi_otg_phy: phy@5d000 { + compatible = "marvell,a3700-utmi-otg-phy"; + reg = <0x5d000 0x800>; + marvell,usb-misc-reg = <&usb32_syscon>; + #phy-cells = <0>; + }; + + usb32_syscon: system-controller@5d800 { + compatible = "marvell,armada-3700-usb2-host-device-misc", + "syscon"; + reg = <0x5d800 0x800>; + }; + usb2: usb@5e000 { compatible = "marvell,armada-3700-ehci"; - reg = <0x5e000 0x450>; + reg = <0x5e000 0x1000>; + marvell,usb-misc-reg = <&usb2_syscon>; + interrupts = ; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; }; + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,a3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", + "syscon"; + reg = <0x5f800 0x800>; + }; + xor@60900 { compatible = "marvell,armada-3700-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; + reg = <0x60900 0x100>, + <0x60b00 0x100>; xor10 { interrupts = ; @@ -251,26 +413,56 @@ }; }; + crypto: crypto@90000 { + compatible = "inside-secure,safexcel-eip97ies"; + reg = <0x90000 0x20000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&nb_periph_clk 15>; + }; + + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = ; + #mbox-cells = <1>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", - "marvell,sdhci-xenon"; - reg = <0xd0000 0x300 - 0x1e808 0x4>; + "marvell,sdhci-xenon"; + reg = <0xd0000 0x300>, + <0x1e808 0x4>; + interrupts = ; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; status = "disabled"; }; sdhci0: sdhci@d8000 { compatible = "marvell,armada-3700-sdhci", - "marvell,sdhci-xenon"; - reg = <0xd8000 0x300 - 0x17808 0x4>; + "marvell,sdhci-xenon"; + reg = <0xd8000 0x300>, + <0x17808 0x4>; + interrupts = ; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; status = "disabled"; }; sata: sata@e0000 { compatible = "marvell,armada-3700-ahci"; - reg = <0xe0000 0x2000>; + reg = <0xe0000 0x178>; interrupts = ; + clocks = <&nb_periph_clk 1>; + phys = <&comphy2 0>; + phy-names = "sata-phy"; status = "disabled"; }; @@ -279,72 +471,26 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x1d00000 0x10000>, /* GICD */ - <0x1d40000 0x40000>; /* GICR */ - }; - - eth0: neta@30000 { - compatible = "marvell,armada-3700-neta"; - reg = <0x30000 0x20>; - status = "disabled"; - }; - - eth1: neta@40000 { - compatible = "marvell,armada-3700-neta"; - reg = <0x40000 0x20>; - status = "disabled"; - }; - - i2c0: i2c@11000 { - compatible = "marvell,armada-3700-i2c"; - reg = <0x11000 0x100>; - status = "disabled"; - }; - - spi0: spi@10600 { - compatible = "marvell,armada-3700-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <0>; - spi-max-frequency = <50000000>; - clocks = <&nb_periph_clk 7>; - status = "disabled"; - }; - - comphy: comphy@18300 { - compatible = "marvell,comphy-a3700"; - reg = <0x18300 0x28>, - <0x1f300 0x3d000>; - #address-cells = <1>; - #size-cells = <0>; - - comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; + <0x1d40000 0x40000>, /* GICR */ + <0x1d80000 0x2000>, /* GICC */ + <0x1d90000 0x2000>, /* GICH */ + <0x1da0000 0x20000>; /* GICV */ + interrupts = ; }; }; pcie0: pcie@d0070000 { compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + status = "disabled"; reg = <0 0xd0070000 0 0x20000>; #address-cells = <3>; #size-cells = <2>; - device_type = "pci"; - num-lanes = <1>; - status = "disabled"; - - bus-range = <0 0xff>; + bus-range = <0x00 0xff>; + interrupts = ; + #interrupt-cells = <1>; + msi-parent = <&pcie0>; + msi-controller; /* * The 128 MiB address range [0xe8000000-0xf0000000] is * dedicated for PCIe and can be assigned to 8 windows @@ -352,10 +498,27 @@ * IO at the end and the remaining seven windows * (totaling 127 MiB) for MEM. */ - ranges = <0x82000000 0 0xe8000000 - 0 0xe8000000 0 0x7f00000 /* Port 0 MEM */ - 0x81000000 0 0xeff00000 - 0 0xeff00000 0 0x100000>; /* Port 0 IO*/ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0xeff00000 0 0xeff00000 0 0x00100000>; /* Port 0 IO*/ + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + max-link-speed = <2>; + phys = <&comphy1 0>; + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware"; + mboxes = <&rwtm 0>; + status = "okay"; }; }; }; diff --git a/include/dt-bindings/bus/moxtet.h b/include/dt-bindings/bus/moxtet.h new file mode 100644 index 0000000000..10528de7b3 --- /dev/null +++ b/include/dt-bindings/bus/moxtet.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Constant for device tree bindings for Turris Mox module configuration bus + * + * Copyright (C) 2019 Marek Behún + */ + +#ifndef _DT_BINDINGS_BUS_MOXTET_H +#define _DT_BINDINGS_BUS_MOXTET_H + +#define MOXTET_IRQ_PCI 0 +#define MOXTET_IRQ_USB3 4 +#define MOXTET_IRQ_PERIDOT(n) (8 + (n)) +#define MOXTET_IRQ_TOPAZ 12 + +#endif /* _DT_BINDINGS_BUS_MOXTET_H */