From: Qianyu Gong Date: Thu, 18 Feb 2016 05:02:00 +0000 (+0800) Subject: fm: fdt: Move fman ucode fixup to driver code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=075affb1ac0cc72e4d599df5f39bd40389312d6a;p=u-boot.git fm: fdt: Move fman ucode fixup to driver code Not only powerpc/mpc85xx but also Freescale Layerscape platforms will use fdt_fixup_fman_firmware() to insert Fman ucode blob into the device tree. So move the function to Fman driver code. Signed-off-by: Gong Qianyu Reviewed-by: York Sun --- diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 50eef052a5..ced216c680 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -19,7 +19,9 @@ #ifdef CONFIG_FSL_ESDHC #include #endif -#include /* For struct qe_firmware */ +#ifdef CONFIG_SYS_DPAA_FMAN +#include +#endif DECLARE_GLOBAL_DATA_PTR; @@ -488,125 +490,6 @@ static void ft_fixup_qe_snum(void *blob) } #endif -/** - * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree - * - * The binding for an Fman firmware node is documented in - * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains - * the actual Fman firmware binary data. The operating system is expected to - * be able to parse the binary data to determine any attributes it needs. - */ -#ifdef CONFIG_SYS_DPAA_FMAN -void fdt_fixup_fman_firmware(void *blob) -{ - int rc, fmnode, fwnode = -1; - uint32_t phandle; - struct qe_firmware *fmanfw; - const struct qe_header *hdr; - unsigned int length; - uint32_t crc; - const char *p; - - /* The first Fman we find will contain the actual firmware. */ - fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman"); - if (fmnode < 0) - /* Exit silently if there are no Fman devices */ - return; - - /* If we already have a firmware node, then also exit silently. */ - if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0) - return; - - /* If the environment variable is not set, then exit silently */ - p = getenv("fman_ucode"); - if (!p) - return; - - fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16); - if (!fmanfw) - return; - - hdr = &fmanfw->header; - length = be32_to_cpu(hdr->length); - - /* Verify the firmware. */ - if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || - (hdr->magic[2] != 'F')) { - printf("Data at %p is not an Fman firmware\n", fmanfw); - return; - } - - if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) { - printf("Fman firmware at %p is too large (size=%u)\n", - fmanfw, length); - return; - } - - length -= sizeof(u32); /* Subtract the size of the CRC */ - crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length)); - if (crc != crc32_no_comp(0, (void *)fmanfw, length)) { - printf("Fman firmware at %p has invalid CRC\n", fmanfw); - return; - } - - /* Increase the size of the fdt to make room for the node. */ - rc = fdt_increase_size(blob, fmanfw->header.length); - if (rc < 0) { - printf("Unable to make room for Fman firmware: %s\n", - fdt_strerror(rc)); - return; - } - - /* Create the firmware node. */ - fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware"); - if (fwnode < 0) { - char s[64]; - fdt_get_path(blob, fmnode, s, sizeof(s)); - printf("Could not add firmware node to %s: %s\n", s, - fdt_strerror(fwnode)); - return; - } - rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware"); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add compatible property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - phandle = fdt_create_phandle(blob, fwnode); - if (!phandle) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add phandle property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add firmware property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - - /* Find all other Fman nodes and point them to the firmware node. */ - while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) { - rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fmnode, s, sizeof(s)); - printf("Could not add pointer property to node %s: %s\n", - s, fdt_strerror(rc)); - return; - } - } -} -#else -#define fdt_fixup_fman_firmware(x) -#endif - #if defined(CONFIG_PPC_P4080) static void fdt_fixup_usb(void *fdt) { @@ -752,7 +635,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) ft_fixup_qe_snum(blob); #endif +#ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_firmware(blob); +#endif #ifdef CONFIG_SYS_NS16550 do_fixup_by_compat_u32(blob, "ns16550", diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index a3c9f99627..493cdc6d48 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -6,6 +6,7 @@ obj-y += dtsec.o obj-y += eth.o +obj-y += fdt.o obj-y += fm.o obj-y += init.o obj-y += tgec.o diff --git a/drivers/net/fm/fdt.c b/drivers/net/fm/fdt.c new file mode 100644 index 0000000000..830d228dba --- /dev/null +++ b/drivers/net/fm/fdt.c @@ -0,0 +1,128 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include /* For struct qe_firmware */ + +#ifdef CONFIG_SYS_DPAA_FMAN +/** + * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree + * + * The binding for an Fman firmware node is documented in + * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains + * the actual Fman firmware binary data. The operating system is expected to + * be able to parse the binary data to determine any attributes it needs. + */ +void fdt_fixup_fman_firmware(void *blob) +{ + int rc, fmnode, fwnode = -1; + uint32_t phandle; + struct qe_firmware *fmanfw; + const struct qe_header *hdr; + unsigned int length; + uint32_t crc; + const char *p; + + /* The first Fman we find will contain the actual firmware. */ + fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman"); + if (fmnode < 0) + /* Exit silently if there are no Fman devices */ + return; + + /* If we already have a firmware node, then also exit silently. */ + if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0) + return; + + /* If the environment variable is not set, then exit silently */ + p = getenv("fman_ucode"); + if (!p) + return; + + fmanfw = (struct qe_firmware *)simple_strtoul(p, NULL, 16); + if (!fmanfw) + return; + + hdr = &fmanfw->header; + length = be32_to_cpu(hdr->length); + + /* Verify the firmware. */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printf("Data at %p is not an Fman firmware\n", fmanfw); + return; + } + + if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) { + printf("Fman firmware at %p is too large (size=%u)\n", + fmanfw, length); + return; + } + + length -= sizeof(u32); /* Subtract the size of the CRC */ + crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length)); + if (crc != crc32_no_comp(0, (void *)fmanfw, length)) { + printf("Fman firmware at %p has invalid CRC\n", fmanfw); + return; + } + + /* Increase the size of the fdt to make room for the node. */ + rc = fdt_increase_size(blob, fmanfw->header.length); + if (rc < 0) { + printf("Unable to make room for Fman firmware: %s\n", + fdt_strerror(rc)); + return; + } + + /* Create the firmware node. */ + fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware"); + if (fwnode < 0) { + char s[64]; + fdt_get_path(blob, fmnode, s, sizeof(s)); + printf("Could not add firmware node to %s: %s\n", s, + fdt_strerror(fwnode)); + return; + } + rc = fdt_setprop_string(blob, fwnode, "compatible", + "fsl,fman-firmware"); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add compatible property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + phandle = fdt_create_phandle(blob, fwnode); + if (!phandle) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add phandle property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, + fmanfw->header.length); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add firmware property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + + /* Find all other Fman nodes and point them to the firmware node. */ + while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, + "fsl,fman")) > 0) { + rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", + phandle); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fmnode, s, sizeof(s)); + printf("Could not add pointer property to node %s: %s\n", + s, fdt_strerror(rc)); + return; + } + } +} +#endif diff --git a/include/fsl_fman.h b/include/fsl_fman.h index 4d04415ba8..f3e35f8c6b 100644 --- a/include/fsl_fman.h +++ b/include/fsl_fman.h @@ -460,4 +460,5 @@ typedef struct ccsr_fman { u8 res5[4*1024]; } ccsr_fman_t; +void fdt_fixup_fman_firmware(void *blob); #endif /*__FSL_FMAN_H__*/