From: stroese Date: Thu, 16 Dec 2004 18:43:13 +0000 (+0000) Subject: esd common update X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0621f6f9d33e7b9949a0f1b6d296ee1da6fb0198;p=u-boot.git esd common update --- diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c new file mode 100644 index 0000000000..d4009b7c4e --- /dev/null +++ b/board/esd/common/auto_update.c @@ -0,0 +1,537 @@ +/* + * (C) Copyright 2003-2004 + * Gary Jennejohn, DENX Software Engineering, gj@denx.de. + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "auto_update.h" + +#ifdef CONFIG_AUTO_UPDATE + +#if !(CONFIG_COMMANDS & CFG_CMD_FAT) +#error "must define CFG_CMD_FAT" +#endif + +extern au_image_t au_image[]; +extern int N_AU_IMAGES; + +#define AU_DEBUG +#undef AU_DEBUG + +#undef debug +#ifdef AU_DEBUG +#define debug(fmt,args...) printf (fmt ,##args) +#else +#define debug(fmt,args...) +#endif /* AU_DEBUG */ + + +#define LOAD_ADDR ((unsigned char *)0x100000) /* where to load files into memory */ +#define MAX_LOADSZ 0x1e00000 + +/* externals */ +extern int fat_register_device(block_dev_desc_t *, int); +extern int file_fat_detectfs(void); +extern long file_fat_read(const char *, void *, unsigned long); +long do_fat_read (const char *filename, void *buffer, unsigned long maxsize, int dols); +#ifdef CONFIG_VFD +extern int trab_vfd (ulong); +extern int transfer_pic(unsigned char, unsigned char *, int, int); +#endif +extern int flash_sect_erase(ulong, ulong); +extern int flash_sect_protect (int, ulong, ulong); +extern int flash_write (uchar *, ulong, ulong); +/* change char* to void* to shutup the compiler */ +extern block_dev_desc_t *get_dev (char*, int); + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +/* references to names in cmd_nand.c */ +#define NANDRW_READ 0x01 +#define NANDRW_WRITE 0x00 +#define NANDRW_JFFS2 0x02 +#define NANDRW_JFFS2_SKIP 0x04 +extern struct nand_chip nand_dev_desc[]; +extern int nand_rw(struct nand_chip* nand, int cmd, size_t start, size_t len, + size_t * retlen, u_char * buf); +extern int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean); +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ + +extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE]; + + +int au_check_cksum_valid(int i, long nbytes) +{ + image_header_t *hdr; + unsigned long checksum; + + hdr = (image_header_t *)LOAD_ADDR; + + if ((au_image[i].type == AU_FIRMWARE) && (au_image[i].size != ntohl(hdr->ih_size))) { + printf ("Image %s has wrong size\n", au_image[i].name); + return -1; + } + + if (nbytes != (sizeof(*hdr) + ntohl(hdr->ih_size))) { + printf ("Image %s bad total SIZE\n", au_image[i].name); + return -1; + } + /* check the data CRC */ + checksum = ntohl(hdr->ih_dcrc); + + if (crc32 (0, (char *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size)) + != checksum) { + printf ("Image %s bad data checksum\n", au_image[i].name); + return -1; + } + return 0; +} + + +int au_check_header_valid(int i, long nbytes) +{ + image_header_t *hdr; + unsigned long checksum; + + hdr = (image_header_t *)LOAD_ADDR; + /* check the easy ones first */ +#undef CHECK_VALID_DEBUG +#ifdef CHECK_VALID_DEBUG + printf("magic %#x %#x ", ntohl(hdr->ih_magic), IH_MAGIC); + printf("arch %#x %#x ", hdr->ih_arch, IH_CPU_PPC); + printf("size %#x %#lx ", ntohl(hdr->ih_size), nbytes); + printf("type %#x %#x ", hdr->ih_type, IH_TYPE_KERNEL); +#endif + if (nbytes < sizeof(*hdr)) + { + printf ("Image %s bad header SIZE\n", au_image[i].name); + return -1; + } + if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC) + { + printf ("Image %s bad MAGIC or ARCH\n", au_image[i].name); + return -1; + } + /* check the hdr CRC */ + checksum = ntohl(hdr->ih_hcrc); + hdr->ih_hcrc = 0; + + if (crc32 (0, (char *)hdr, sizeof(*hdr)) != checksum) { + printf ("Image %s bad header checksum\n", au_image[i].name); + return -1; + } + hdr->ih_hcrc = htonl(checksum); + + /* check the type - could do this all in one gigantic if() */ + if ((au_image[i].type == AU_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) { + printf ("Image %s wrong type\n", au_image[i].name); + return -1; + } + if ((au_image[i].type == AU_SCRIPT) && (hdr->ih_type != IH_TYPE_SCRIPT)) { + printf ("Image %s wrong type\n", au_image[i].name); + return -1; + } + + /* recycle checksum */ + checksum = ntohl(hdr->ih_size); + +#if 0 /* test-only */ + /* for kernel and app the image header must also fit into flash */ + if (idx != IDX_DISK) + checksum += sizeof(*hdr); + /* check the size does not exceed space in flash. HUSH scripts */ + /* all have ausize[] set to 0 */ + if ((ausize[idx] != 0) && (ausize[idx] < checksum)) { + printf ("Image %s is bigger than FLASH\n", au_image[i].name); + return -1; + } +#endif + + return 0; +} + + +int au_do_update(int i, long sz) +{ + image_header_t *hdr; + char *addr; + long start, end; + int off, rc; + uint nbytes; + int k; +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + int total; +#endif + + hdr = (image_header_t *)LOAD_ADDR; + + switch (au_image[i].type) { + case AU_SCRIPT: + printf("Executing script %s\n", au_image[i].name); + + /* execute a script */ + if (hdr->ih_type == IH_TYPE_SCRIPT) { + addr = (char *)((char *)hdr + sizeof(*hdr)); + /* stick a NULL at the end of the script, otherwise */ + /* parse_string_outer() runs off the end. */ + addr[ntohl(hdr->ih_size)] = 0; + addr += 8; + + /* + * Replace cr/lf with ; + */ + k = 0; + while (addr[k] != 0) { + if ((addr[k] == 10) || (addr[k] == 13)) { + addr[k] = ';'; + } + k++; + } + + run_command(addr, 0); + return 0; + } + + break; + + case AU_FIRMWARE: + case AU_NOR: + case AU_NAND: + start = au_image[i].start; + end = au_image[i].start + au_image[i].size - 1; + + /* unprotect the address range */ + /* this assumes that ONLY the firmware is protected! */ + if (au_image[i].type == AU_FIRMWARE) { + flash_sect_protect(0, start, end); + } + + /* + * erase the address range. + */ + if (au_image[i].type != AU_NAND) { + printf("Updating NOR FLASH with image %s\n", au_image[i].name); + debug ("flash_sect_erase(%lx, %lx);\n", start, end); + flash_sect_erase(start, end); + } else { +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + printf("Updating NAND FLASH with image %s\n", au_image[i].name); + debug ("nand_erase(%lx, %lx);\n", start, end); + rc = nand_erase (nand_dev_desc, start, end - start + 1, 0); + debug ("nand_erase returned %x\n", rc); +#endif + } + + udelay(10000); + + /* strip the header - except for the kernel and ramdisk */ + if (au_image[i].type != AU_FIRMWARE) { + addr = (char *)hdr; + off = sizeof(*hdr); + nbytes = sizeof(*hdr) + ntohl(hdr->ih_size); + } else { + addr = (char *)((char *)hdr + sizeof(*hdr)); + off = 0; + nbytes = ntohl(hdr->ih_size); + } + + /* + * copy the data from RAM to FLASH + */ + if (au_image[i].type != AU_NAND) { + debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes); + rc = flash_write(addr, start, nbytes); + } else { +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + debug ("nand_rw(%p, %lx %x)\n", addr, start, nbytes); + rc = nand_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2, + start, nbytes, &total, addr); + debug ("nand_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes); +#endif + } + if (rc != 0) { + printf("Flashing failed due to error %d\n", rc); + return -1; + } + + /* + * check the dcrc of the copy + */ + if (au_image[i].type != AU_NAND) { + rc = crc32 (0, (char *)(start + off), ntohl(hdr->ih_size)); + } else { +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + rc = nand_rw(nand_dev_desc, NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP, + start, nbytes, &total, addr); + rc = crc32 (0, (char *)(addr + off), ntohl(hdr->ih_size)); +#endif + } + if (rc != ntohl(hdr->ih_dcrc)) { + printf ("Image %s Bad Data Checksum After COPY\n", au_image[i].name); + return -1; + } + + /* protect the address range */ + /* this assumes that ONLY the firmware is protected! */ + if (au_image[i].type == AU_FIRMWARE) { + flash_sect_protect(1, start, end); + } + + break; + + default: + printf("Wrong image type selected!\n"); + } + + return 0; +} + + +static void process_macros (const char *input, char *output) +{ + char c, prev; + const char *varname_start = NULL; + int inputcnt = strlen (input); + int outputcnt = CFG_CBSIZE; + int state = 0; /* 0 = waiting for '$' */ + /* 1 = waiting for '(' or '{' */ + /* 2 = waiting for ')' or '}' */ + /* 3 = waiting for ''' */ +#ifdef DEBUG_PARSER + char *output_start = output; + + printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", strlen(input), input); +#endif + + prev = '\0'; /* previous character */ + + while (inputcnt && outputcnt) { + c = *input++; + inputcnt--; + + if (state!=3) { + /* remove one level of escape characters */ + if ((c == '\\') && (prev != '\\')) { + if (inputcnt-- == 0) + break; + prev = c; + c = *input++; + } + } + + switch (state) { + case 0: /* Waiting for (unescaped) $ */ + if ((c == '\'') && (prev != '\\')) { + state = 3; + break; + } + if ((c == '$') && (prev != '\\')) { + state++; + } else { + *(output++) = c; + outputcnt--; + } + break; + case 1: /* Waiting for ( */ + if (c == '(' || c == '{') { + state++; + varname_start = input; + } else { + state = 0; + *(output++) = '$'; + outputcnt--; + + if (outputcnt) { + *(output++) = c; + outputcnt--; + } + } + break; + case 2: /* Waiting for ) */ + if (c == ')' || c == '}') { + int i; + char envname[CFG_CBSIZE], *envval; + int envcnt = input-varname_start-1; /* Varname # of chars */ + + /* Get the varname */ + for (i = 0; i < envcnt; i++) { + envname[i] = varname_start[i]; + } + envname[i] = 0; + + /* Get its value */ + envval = getenv (envname); + + /* Copy into the line if it exists */ + if (envval != NULL) + while ((*envval) && outputcnt) { + *(output++) = *(envval++); + outputcnt--; + } + /* Look for another '$' */ + state = 0; + } + break; + case 3: /* Waiting for ' */ + if ((c == '\'') && (prev != '\\')) { + state = 0; + } else { + *(output++) = c; + outputcnt--; + } + break; + } + prev = c; + } + + if (outputcnt) + *output = 0; + +#ifdef DEBUG_PARSER + printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n", + strlen(output_start), output_start); +#endif +} + + +/* + * this is called from board_init() after the hardware has been set up + * and is usable. That seems like a good time to do this. + * Right now the return value is ignored. + */ +int do_auto_update(void) +{ + block_dev_desc_t *stor_dev; + long sz; + int i, res, cnt, old_ctrlc, got_ctrlc; + char buffer[32]; + char str[80]; + + /* + * Check whether a CompactFlash is inserted + */ + if (ide_dev_desc[0].type == DEV_TYPE_UNKNOWN) { + return -1; /* no disk detected! */ + } + + /* check whether it has a partition table */ + stor_dev = get_dev("ide", 0); + if (stor_dev == NULL) { + debug ("Uknown device type\n"); + return -1; + } + if (fat_register_device(stor_dev, 1) != 0) { + debug ("Unable to register ide disk 0:1 for fatls\n"); + return -1; + } + + /* + * Check if magic file is present + */ + if (do_fat_read(AU_MAGIC_FILE, buffer, sizeof(buffer), LS_NO) <= 0) { + return -1; + } + +#ifdef CONFIG_AUTO_UPDATE_SHOW + board_auto_update_show(1); +#endif + puts("\nAutoUpdate Disk detected! Trying to update system...\n"); + + /* make sure that we see CTRL-C and save the old state */ + old_ctrlc = disable_ctrlc(0); + + /* just loop thru all the possible files */ + for (i = 0; i < N_AU_IMAGES; i++) { + /* + * Try to expand the environment var in the fname + */ + process_macros(au_image[i].name, str); + strcpy(au_image[i].name, str); + + printf("Reading %s ...", au_image[i].name); + /* just read the header */ + sz = do_fat_read(au_image[i].name, LOAD_ADDR, sizeof(image_header_t), LS_NO); + debug ("read %s sz %ld hdr %d\n", + au_image[i].name, sz, sizeof(image_header_t)); + if (sz <= 0 || sz < sizeof(image_header_t)) { + puts(" not found\n"); + continue; + } + if (au_check_header_valid(i, sz) < 0) { + puts(" header not valid\n"); + continue; + } + sz = do_fat_read(au_image[i].name, LOAD_ADDR, MAX_LOADSZ, LS_NO); + debug ("read %s sz %ld hdr %d\n", + au_image[i].name, sz, sizeof(image_header_t)); + if (sz <= 0 || sz <= sizeof(image_header_t)) { + puts(" not found\n"); + continue; + } + if (au_check_cksum_valid(i, sz) < 0) { + puts(" checksum not valid\n"); + continue; + } + puts(" done\n"); + + do { + res = au_do_update(i, sz); + /* let the user break out of the loop */ + if (ctrlc() || had_ctrlc()) { + clear_ctrlc(); + if (res < 0) + got_ctrlc = 1; + break; + } + cnt++; + } while (res < 0); + } + + /* restore the old state */ + disable_ctrlc(old_ctrlc); + + puts("AutoUpdate finished\n\n"); +#ifdef CONFIG_AUTO_UPDATE_SHOW + board_auto_update_show(0); +#endif + + return 0; +} + + +int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + do_auto_update(); + + return 0; +} +U_BOOT_CMD( + autoupd, 1, 1, auto_update, + "autoupd - Automatically update images\n", + NULL +); +#endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/esd/common/auto_update.h b/board/esd/common/auto_update.h new file mode 100644 index 0000000000..e2af3c7b15 --- /dev/null +++ b/board/esd/common/auto_update.h @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _AUTO_UPDATE_H_ +#define _AUTO_UPDATE_H_ + +#define MBR_MAGIC 0x07081967 +#define MBR_MAGIC_ADDR 0x100 /* offset 0x100 should be free space */ + +#define AU_MAGIC_FILE "__auto_update" + +#define AU_SCRIPT 1 +#define AU_FIRMWARE 2 +#define AU_NOR 3 +#define AU_NAND 4 + +struct au_image_s { + char name[80]; + ulong start; + ulong size; + int type; +}; + +typedef struct au_image_s au_image_t; + +int do_auto_update(void); +#ifdef CONFIG_AUTO_UPDATE_SHOW +void board_auto_update_show(int au_active); +#endif + +#endif /* #ifndef _AUTO_UPDATE_H_ */ diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c index d032b001fd..dca10be1b5 100644 --- a/board/esd/common/flash.c +++ b/board/esd/common/flash.c @@ -117,6 +117,7 @@ void flash_print_info (flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; default: printf ("Unknown Vendor "); break; } @@ -151,6 +152,10 @@ void flash_print_info (flash_info_t *info) break; case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); break; + case FLASH_SST320: printf ("SST39LF/VF320 (32 Mbit, uniform sector size)\n"); + break; + case FLASH_SST640: printf ("SST39LF/VF640 (64 Mbit, uniform sector size)\n"); + break; default: printf ("Unknown Chip Type\n"); break; } @@ -235,6 +240,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: + info->flash_id = FLASH_MAN_EXCEL; + break; default: info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; @@ -316,6 +324,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) info->sector_count = 128; info->size = 0x00800000; break; /* => 8 MB */ +#if !(defined(CONFIG_ADCIOP) || defined(CONFIG_DASA_SIM)) case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A: info->flash_id += FLASH_SST800A; info->sector_count = 16; @@ -323,11 +332,28 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) break; /* => 1 MB */ case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A: + case (CFG_FLASH_WORD_SIZE)SST_ID_xF1601: + case (CFG_FLASH_WORD_SIZE)SST_ID_xF1602: info->flash_id += FLASH_SST160A; info->sector_count = 32; info->size = 0x00200000; break; /* => 2 MB */ + case (CFG_FLASH_WORD_SIZE)SST_ID_xF3201: + case (CFG_FLASH_WORD_SIZE)SST_ID_xF3202: + info->flash_id += FLASH_SST320; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE)SST_ID_xF6401: + case (CFG_FLASH_WORD_SIZE)SST_ID_xF6402: + info->flash_id += FLASH_SST640; + info->sector_count = 128; + info->size = 0x00800000; + break; /* => 8 MB */ +#endif + default: info->flash_id = FLASH_UNKNOWN; return (0); /* => no or unknown flash */ @@ -397,7 +423,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) /* read sector protection at sector address, (A7 .. A0) = 0x02 */ /* D0 = 1 if protected */ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD) info->protect[i] = 0; else info->protect[i] = addr2[CFG_FLASH_READ2] & 1; @@ -610,10 +636,10 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) int i; /* Check if Flash is (sufficiently) erased */ - if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) & - (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) { + if ((*((vu_long *)dest) & data) != data) { return (2); } + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c index f27943f518..ad56402693 100644 --- a/board/esd/common/fpga.c +++ b/board/esd/common/fpga.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001-2003 + * (C) Copyright 2001-2004 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * @@ -54,19 +54,42 @@ #define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ #define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ -#define SET_FPGA(data) out32(GPIO0_OR, data) +#ifndef SET_FPGA +# define SET_FPGA(data) out32(GPIO0_OR, data) +#endif + +#ifdef FPGA_PROG_ACTIVE_HIGH +# define FPGA_PRG_LOW FPGA_PRG +# define FPGA_PRG_HIGH 0 +#else +# define FPGA_PRG_LOW 0 +# define FPGA_PRG_HIGH FPGA_PRG +#endif + +#define FPGA_CLK_LOW 0 +#define FPGA_CLK_HIGH FPGA_CLK -#define FPGA_WRITE_1 { \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ +#define FPGA_DATA_LOW 0 +#define FPGA_DATA_HIGH FPGA_DATA + +#define FPGA_WRITE_1 { \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set clock to 0 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set data to 1 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set clock to 1 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);} /* set data to 1 */ #define FPGA_WRITE_0 { \ - SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ - SET_FPGA(FPGA_PRG); /* set data to 0 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set clock to 0 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_LOW); /* set data to 0 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_LOW); /* set clock to 1 */ \ + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);} /* set data to 1 */ + +#ifndef FPGA_DONE_STATE +# define FPGA_DONE_STATE (in32(GPIO0_IR) & FPGA_DONE) +#endif +#ifndef FPGA_INIT_STATE +# define FPGA_INIT_STATE (in32(GPIO0_IR) & FPGA_INIT) +#endif static int fpga_boot(unsigned char *fpgadata, int size) @@ -115,21 +138,23 @@ static int fpga_boot(unsigned char *fpgadata, int size) /* * Setup port pins for fpga programming */ +#ifndef CONFIG_M5249 out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */ - out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */ +#endif + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set pins to high */ - DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); /* * Init fpga by asserting and deasserting PROGRAM* */ - SET_FPGA(FPGA_CLK | FPGA_DATA); + SET_FPGA(FPGA_PRG_LOW | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set prog active */ /* Wait for FPGA init line low */ count = 0; - while (in32(GPIO0_IR) & FPGA_INIT) + while (FPGA_INIT_STATE) { udelay(1000); /* wait 1ms */ /* Check for timeout - 100us max, so use 3ms */ @@ -140,15 +165,15 @@ static int fpga_boot(unsigned char *fpgadata, int size) } } - DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); /* deassert PROGRAM* */ - SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); + SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set prog inactive */ /* Wait for FPGA end of init period . */ count = 0; - while (!(in32(GPIO0_IR) & FPGA_INIT)) + while (!(FPGA_INIT_STATE)) { udelay(1000); /* wait 1ms */ /* Check for timeout */ @@ -159,8 +184,8 @@ static int fpga_boot(unsigned char *fpgadata, int size) } } - DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); DBG("write configuration data into fpga\n"); /* write configuration-data into fpga... */ @@ -232,8 +257,8 @@ static int fpga_boot(unsigned char *fpgadata, int size) } #endif - DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); /* * Check if fpga's DONE signal - correctly booted ? @@ -241,7 +266,7 @@ static int fpga_boot(unsigned char *fpgadata, int size) /* Wait for FPGA end of programming period . */ count = 0; - while (!(in32(GPIO0_IR) & FPGA_DONE)) + while (!(FPGA_DONE_STATE)) { udelay(1000); /* wait 1ms */ /* Check for timeout */ diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c new file mode 100644 index 0000000000..a1fc18089d --- /dev/null +++ b/board/esd/common/lcd.c @@ -0,0 +1,230 @@ +/* + * (C) Copyright 2003-2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "lcd.h" + + +int palette_index; +int palette_value; + + +#ifdef CFG_LCD_ENDIAN +void lcd_setup(int lcd, int config) +{ + if (lcd == 0) { + /* + * Set endianess and reset lcd controller 0 (small) + */ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */ + udelay(10); /* wait 10us */ + if (config == 1) { + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */ + } else { + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */ + } + udelay(10); /* wait 10us */ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */ + } else { + /* + * Set endianess and reset lcd controller 1 (big) + */ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */ + udelay(10); /* wait 10us */ + if (config == 1) { + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */ + } else { + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */ + } + udelay(10); /* wait 10us */ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */ + } + + /* + * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive + */ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */ +} +#endif /* #ifdef CFG_LCD_ENDIAN */ + + +void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, + uchar *logo_bmp, ulong len) +{ + int i; + ushort s1dReg; + uchar s1dValue; + uchar *ptr; + ushort *ptr2; + ushort val; + unsigned char *dst; + int x, y; + int width, height, bpp, colors, line_size; + int header_size; + unsigned char *bmp; + unsigned char r, g, b; + BITMAPINFOHEADER *bm_info; + int reg_byte_swap; + + /* + * Detect epson + */ + if (lcd_reg[0] == 0x1c) { + /* + * Big epson detected + */ + reg_byte_swap = FALSE; + palette_index = 0x1e2; + palette_value = 0x1e4; + puts("LCD: S1D13806"); + } else if (lcd_reg[1] == 0x1c) { + /* + * Big epson detected (with register swap bug) + */ + reg_byte_swap = TRUE; + palette_index = 0x1e3; + palette_value = 0x1e5; + puts("LCD: S1D13806S"); + } else if (lcd_reg[0] == 0x18) { + /* + * Small epson detected (704) + */ + reg_byte_swap = FALSE; + palette_index = 0x15; + palette_value = 0x17; + puts("LCD: S1D13704"); + } else if (lcd_reg[0x10000] == 0x24) { + /* + * Small epson detected (705) + */ + reg_byte_swap = FALSE; + palette_index = 0x15; + palette_value = 0x17; + lcd_reg += 0x10000; /* add offset for 705 regs */ + puts("LCD: S1D13705"); + } else { + puts("LCD: No controller detected!\n"); + return; + } + + for (i = 0; ibiBitCount); + width = LOAD_LONG(bm_info->biWidth); + height = LOAD_LONG(bm_info->biHeight); + switch (bpp) { + case 1: + colors = 1; + line_size = width >> 3; + break; + case 4: + colors = 16; + line_size = width >> 1; + break; + case 8: + colors = 256; + line_size = width; + break; + case 24: + colors = 0; + line_size = width * 3; + break; + default: + printf("LCD: Unknown bpp (%d) im image!\n", bpp); + free(dst); + return; + } + printf(" (%d*%d, %dbpp)\n", width, height, bpp); + + /* + * Write color palette + */ + if (colors <= 256) { + ptr = (unsigned char *)(dst + 14 + 40); + for (i=0; i> 3; + g = *bmp++ >> 2; + r = *bmp++ >> 3; + val = ((r & 0x1f) << 11) | ((g & 0x3f) << 5) | (b & 0x1f); + *ptr2++ = val; + } + } else { + for (x=0; x> 24) | \ + ((unsigned long)(data) << 24) | \ + (((unsigned long)(data) >> 8) & 0x0000ff00 ) | \ + (((unsigned long)(data) << 8) & 0x00ff0000 ))) +#define SWAP_SHORT(data) ((unsigned short) \ + (((unsigned short)(data) >> 8 ) | \ + ((unsigned short)(data) << 8 ))) +#define LOAD_LONG(data) SWAP_LONG(data) +#define LOAD_SHORT(data) SWAP_SHORT(data) + +#ifndef FALSE +#define FALSE 0 +#define TRUE (!FALSE) +#endif + +#define S1D_WRITE_PALETTE(p,i,r,g,b) \ + { \ + ((volatile uchar*)(p))[palette_index] = (uchar)(i); \ + ((volatile uchar*)(p))[palette_value] = (uchar)(r); \ + ((volatile uchar*)(p))[palette_value] = (uchar)(g); \ + ((volatile uchar*)(p))[palette_value] = (uchar)(b); \ + } + +typedef struct +{ + ushort Index; + uchar Value; +} S1D_REGS; + +typedef struct /**** BMP file info structure ****/ +{ + unsigned int biSize; /* Size of info header */ + int biWidth; /* Width of image */ + int biHeight; /* Height of image */ + unsigned short biPlanes; /* Number of color planes */ + unsigned short biBitCount; /* Number of bits per pixel */ + unsigned int biCompression; /* Type of compression to use */ + unsigned int biSizeImage; /* Size of image data */ + int biXPelsPerMeter; /* X pixels per meter */ + int biYPelsPerMeter; /* Y pixels per meter */ + unsigned int biClrUsed; /* Number of colors used */ + unsigned int biClrImportant; /* Number of important colors */ +} BITMAPINFOHEADER; + diff --git a/board/esd/common/s1d13704_320_240_4bpp.h b/board/esd/common/s1d13704_320_240_4bpp.h new file mode 100644 index 0000000000..77c8a467a9 --- /dev/null +++ b/board/esd/common/s1d13704_320_240_4bpp.h @@ -0,0 +1,53 @@ +/* + * + * Generic Header information generated by 13704CFG.EXE (Build 10) + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * Panel: 320x240x4bpp 78Hz Mono 4-Bit STN, Disabled (PCLK=6.666MHz) + * + * This file defines the configuration environment and registers, + * which can be used by any software, such as display drivers. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY + * mode. + * + */ + +static S1D_REGS regs_13704_320_240_4bpp[] = +{ + { 0x00, 0x00 }, /* Revision Code Register */ + { 0x01, 0x04 }, /*00*/ /* Mode Register 0 Register */ + { 0x02, 0xA4 }, /*a0*/ /* Mode Register 1 Register */ + { 0x03, 0x83 }, /*03*/ /* Mode Register 2 Register - bit7 is LUT bypass */ + { 0x04, 0x27 }, /* Horizontal Panel Size Register */ + { 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */ + { 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */ + { 0x07, 0x00 }, /* FPLINE Start Position Register */ + { 0x08, 0x00 }, /* Horizontal Non-Display Period Register */ + { 0x09, 0x00 }, /* FPFRAME Start Position Register */ + { 0x0A, 0x02 }, /* Vertical Non-Display Period Register */ + { 0x0B, 0x00 }, /* MOD Rate Register */ + { 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */ + { 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */ + { 0x0E, 0x00 }, /* Not Used */ + { 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */ + { 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */ + { 0x11, 0x00 }, /* Not Used */ + { 0x12, 0x00 }, /* Memory Address Offset Register */ + { 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */ + { 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */ + { 0x15, 0x00 }, /* Look-Up Table Address Register */ + { 0x16, 0x00 }, /* Look-Up Table Bank Select Register */ + { 0x17, 0x00 }, /* Look-Up Table Data Register */ + { 0x18, 0x01 }, /* GPIO Configuration Control Register */ + { 0x19, 0x01 }, /* GPIO Status/Control Register */ + { 0x1A, 0x00 }, /* Scratch Pad Register */ + { 0x1B, 0x00 }, /* SwivelView Mode Register */ + { 0x1C, 0xA0 }, /* Line Byte Count Register */ + { 0x1D, 0x00 }, /* Not Used */ + { 0x1E, 0x00 }, /* Not Used */ + { 0x1F, 0x00 }, /* Not Used */ +}; diff --git a/board/esd/common/s1d13705_320_240_8bpp.h b/board/esd/common/s1d13705_320_240_8bpp.h new file mode 100644 index 0000000000..60843ac433 --- /dev/null +++ b/board/esd/common/s1d13705_320_240_8bpp.h @@ -0,0 +1,53 @@ +/* + * + * Generic Header information generated by 13704CFG.EXE (Build 10) + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * Panel: 320x240x8bpp 78Hz Mono 8-Bit STN, Disabled (PCLK=6.666MHz) + * + * This file defines the configuration environment and registers, + * which can be used by any software, such as display drivers. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY + * mode. + * + */ + +static S1D_REGS regs_13705_320_240_8bpp[] = +{ + { 0x00, 0x00 }, /* Revision Code Register */ + { 0x01, 0x23 }, /* Mode Register 0 Register */ + { 0x02, 0xE0 }, /* Mode Register 1 Register */ + { 0x03, 0x03 }, /* Mode Register 2 Register - bit7 is LUT bypass */ + { 0x04, 0x27 }, /* Horizontal Panel Size Register */ + { 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */ + { 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */ + { 0x07, 0x00 }, /* FPLINE Start Position Register */ + { 0x08, 0x00 }, /* Horizontal Non-Display Period Register */ + { 0x09, 0x01 }, /* FPFRAME Start Position Register */ + { 0x0A, 0x02 }, /* Vertical Non-Display Period Register */ + { 0x0B, 0x00 }, /* MOD Rate Register */ + { 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */ + { 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */ + { 0x0E, 0x00 }, /* Not Used */ + { 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */ + { 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */ + { 0x11, 0x00 }, /* Not Used */ + { 0x12, 0x00 }, /* Memory Address Offset Register */ + { 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */ + { 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */ + { 0x15, 0x00 }, /* Look-Up Table Address Register */ + { 0x16, 0x00 }, /* Look-Up Table Bank Select Register */ + { 0x17, 0x00 }, /* Look-Up Table Data Register */ + { 0x18, 0x01 }, /* GPIO Configuration Control Register */ + { 0x19, 0x01 }, /* GPIO Status/Control Register */ + { 0x1A, 0x00 }, /* Scratch Pad Register */ + { 0x1B, 0x00 }, /* SwivelView Mode Register */ + { 0x1C, 0xFF }, /* Line Byte Count Register */ + { 0x1D, 0x00 }, /* Not Used */ + { 0x1E, 0x00 }, /* Not Used */ + { 0x1F, 0x00 }, /* Not Used */ +}; diff --git a/board/esd/common/s1d13806_1024_768_8bpp.h b/board/esd/common/s1d13806_1024_768_8bpp.h new file mode 100644 index 0000000000..a37e79719a --- /dev/null +++ b/board/esd/common/s1d13806_1024_768_8bpp.h @@ -0,0 +1,126 @@ +/* + * + * File generated by S1D13806CFG.EXE + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY mode. + * + * Panel: (active) 1024x768 34Hz TFT Single 12-bit (PCLK=BUSCLK=33.333MHz) + * Memory: Embedded SDRAM (MCLK=CLKI=49.100MHz) (BUSCLK=33.333MHz) + * + */ + +static S1D_REGS regs_13806_1024_768_8bpp[] = +{ + {0x0001,0x00}, /* Miscellaneous Register */ + {0x01FC,0x00}, /* Display Mode Register */ + {0x0004,0x00}, /* General IO Pins Configuration Register 0 */ + {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ + {0x0008,0x00}, /* General IO Pins Control Register 0 */ + {0x0009,0x00}, /* General IO Pins Control Register 1 */ + {0x0010,0x00}, /* Memory Clock Configuration Register */ + {0x0014,0x01}, /* LCD Pixel Clock Configuration Register */ + {0x0018,0x00}, /* CRT/TV Pixel Clock Configuration Register */ + {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ + {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ + {0x0021,0x03}, /* DRAM Refresh Rate Register */ + {0x002A,0x00}, /* DRAM Timings Control Register 0 */ + {0x002B,0x01}, /* DRAM Timings Control Register 1 */ + {0x0020,0x80}, /* Memory Configuration Register */ + {0x0030,0x55}, /* Panel Type Register */ + {0x0031,0x00}, /* MOD Rate Register */ + {0x0032,0x7F}, /* LCD Horizontal Display Width Register */ + {0x0034,0x12}, /* LCD Horizontal Non-Display Period Register */ + {0x0035,0x01}, /* TFT FPLINE Start Position Register */ + {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ + {0x0038,0xFF}, /* LCD Vertical Display Height Register 0 */ + {0x0039,0x02}, /* LCD Vertical Display Height Register 1 */ + {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ + {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */ + {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ + {0x0040,0x03}, /* LCD Display Mode Register */ + {0x0041,0x00}, /* LCD Miscellaneous Register */ + {0x0042,0x00}, /* LCD Display Start Address Register 0 */ + {0x0043,0x00}, /* LCD Display Start Address Register 1 */ + {0x0044,0x00}, /* LCD Display Start Address Register 2 */ + {0x0046,0x00}, /* LCD Memory Address Offset Register 0 */ + {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ + {0x0048,0x00}, /* LCD Pixel Panning Register */ + {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ + {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ + {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ + {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ + {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ + {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ + {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ + {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ + {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ + {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ + {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ + {0x005B,0x10}, /* TV Output Control Register */ + {0x0060,0x03}, /* CRT/TV Display Mode Register */ + {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ + {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ + {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ + {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */ + {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */ + {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ + {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ + {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ + {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ + {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ + {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ + {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ + {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ + {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ + {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ + {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ + {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ + {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ + {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ + {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ + {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ + {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ + {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ + {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ + {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ + {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ + {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ + {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ + {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ + {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ + {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ + {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ + {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ + {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ + {0x0100,0x00}, /* BitBlt Control Register 0 */ + {0x0101,0x00}, /* BitBlt Control Register 1 */ + {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ + {0x0103,0x00}, /* BitBlt Operation Register */ + {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ + {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ + {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ + {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ + {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ + {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ + {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ + {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ + {0x0110,0x00}, /* BitBlt Width Register 0 */ + {0x0111,0x00}, /* BitBlt Width Register 1 */ + {0x0112,0x00}, /* BitBlt Height Register 0 */ + {0x0113,0x00}, /* BitBlt Height Register 1 */ + {0x0114,0x00}, /* BitBlt Background Color Register 0 */ + {0x0115,0x00}, /* BitBlt Background Color Register 1 */ + {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ + {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ + {0x01E0,0x00}, /* Look-Up Table Mode Register */ + {0x01E2,0x00}, /* Look-Up Table Address Register */ + {0x01F0,0x10}, /* Power Save Configuration Register */ + {0x01F1,0x00}, /* Power Save Status Register */ + {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ + {0x01FC,0x01}, /* Display Mode Register */ +}; + diff --git a/board/esd/common/s1d13806_320_240_4bpp.h b/board/esd/common/s1d13806_320_240_4bpp.h new file mode 100644 index 0000000000..beb6e9ed64 --- /dev/null +++ b/board/esd/common/s1d13806_320_240_4bpp.h @@ -0,0 +1,126 @@ +/* + * + * File generated by S1D13806CFG.EXE + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY mode. + * + * Panel: (active) 320x240 62Hz STN Single 4-bit (PCLK=CLKI2/4=6.250MHz) + * Memory: Embedded SDRAM (MCLK=CLKI=49.500MHz) (BUSCLK=33.333MHz) + * + */ + +static S1D_REGS regs_13806_320_240_4bpp[] = +{ + {0x0001,0x00}, /* Miscellaneous Register */ + {0x01FC,0x00}, /* Display Mode Register */ + {0x0004,0x08}, /* General IO Pins Configuration Register 0 */ + {0x0005,0x08}, /* General IO Pins Configuration Register 1 */ + {0x0008,0x08}, /* General IO Pins Control Register 0 */ + {0x0009,0x00}, /* General IO Pins Control Register 1 */ + {0x0010,0x00}, /* Memory Clock Configuration Register */ + {0x0014,0x32}, /* LCD Pixel Clock Configuration Register */ + {0x0018,0x00}, /* CRT/TV Pixel Clock Configuration Register */ + {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ + {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ + {0x0021,0x03}, /* DRAM Refresh Rate Register */ + {0x002A,0x00}, /* DRAM Timings Control Register 0 */ + {0x002B,0x01}, /* DRAM Timings Control Register 1 */ + {0x0020,0x80}, /* Memory Configuration Register */ + {0x0030,0x00}, /* Panel Type Register */ + {0x0031,0x00}, /* MOD Rate Register */ + {0x0032,0x27}, /* LCD Horizontal Display Width Register */ + {0x0034,0x03}, /* LCD Horizontal Non-Display Period Register */ + {0x0035,0x01}, /* TFT FPLINE Start Position Register */ + {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ + {0x0038,0xEF}, /* LCD Vertical Display Height Register 0 */ + {0x0039,0x00}, /* LCD Vertical Display Height Register 1 */ + {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ + {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */ + {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ + {0x0040,0x02}, /* LCD Display Mode Register */ + {0x0041,0x00}, /* LCD Miscellaneous Register */ + {0x0042,0x00}, /* LCD Display Start Address Register 0 */ + {0x0043,0x00}, /* LCD Display Start Address Register 1 */ + {0x0044,0x00}, /* LCD Display Start Address Register 2 */ + {0x0046,0x50}, /* LCD Memory Address Offset Register 0 */ + {0x0047,0x00}, /* LCD Memory Address Offset Register 1 */ + {0x0048,0x00}, /* LCD Pixel Panning Register */ + {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ + {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ + {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ + {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ + {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ + {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ + {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ + {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ + {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ + {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ + {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ + {0x005B,0x10}, /* TV Output Control Register */ + {0x0060,0x03}, /* CRT/TV Display Mode Register */ + {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ + {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ + {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ + {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */ + {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */ + {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ + {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ + {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ + {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ + {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ + {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ + {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ + {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ + {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ + {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ + {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ + {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ + {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ + {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ + {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ + {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ + {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ + {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ + {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ + {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ + {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ + {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ + {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ + {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ + {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ + {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ + {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ + {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ + {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ + {0x0100,0x00}, /* BitBlt Control Register 0 */ + {0x0101,0x00}, /* BitBlt Control Register 1 */ + {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ + {0x0103,0x00}, /* BitBlt Operation Register */ + {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ + {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ + {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ + {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ + {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ + {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ + {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ + {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ + {0x0110,0x00}, /* BitBlt Width Register 0 */ + {0x0111,0x00}, /* BitBlt Width Register 1 */ + {0x0112,0x00}, /* BitBlt Height Register 0 */ + {0x0113,0x00}, /* BitBlt Height Register 1 */ + {0x0114,0x00}, /* BitBlt Background Color Register 0 */ + {0x0115,0x00}, /* BitBlt Background Color Register 1 */ + {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ + {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ + {0x01E0,0x00}, /* Look-Up Table Mode Register */ + {0x01E2,0x00}, /* Look-Up Table Address Register */ + {0x01F0,0x10}, /* Power Save Configuration Register */ + {0x01F1,0x00}, /* Power Save Status Register */ + {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ + {0x01FC,0x01}, /* Display Mode Register */ +}; + diff --git a/board/esd/common/s1d13806_640_480_16bpp.h b/board/esd/common/s1d13806_640_480_16bpp.h new file mode 100644 index 0000000000..6b83bf827a --- /dev/null +++ b/board/esd/common/s1d13806_640_480_16bpp.h @@ -0,0 +1,126 @@ +/* + * + * File generated by S1D13806CFG.EXE + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY mode. + * + * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz) + * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz) + * + */ + +static S1D_REGS regs_13806_640_480_16bpp[] = +{ + {0x0001,0x00}, /* Miscellaneous Register */ + {0x01FC,0x00}, /* Display Mode Register */ + {0x0004,0x18}, /* General IO Pins Configuration Register 0 */ + {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ + {0x0008,0x18}, /* General IO Pins Control Register 0 */ + {0x0009,0x00}, /* General IO Pins Control Register 1 */ + {0x0010,0x00}, /* Memory Clock Configuration Register */ + {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */ + {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ + {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ + {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ + {0x0021,0x03}, /* DRAM Refresh Rate Register */ + {0x002A,0x00}, /* DRAM Timings Control Register 0 */ + {0x002B,0x01}, /* DRAM Timings Control Register 1 */ + {0x0020,0x80}, /* Memory Configuration Register */ + {0x0030,0x25}, /* Panel Type Register */ + {0x0031,0x00}, /* MOD Rate Register */ + {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ + {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ + {0x0035,0x00}, /* TFT FPLINE Start Position Register */ + {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ + {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ + {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ + {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */ + {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ + {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ + {0x0040,0x05}, /* LCD Display Mode Register */ + {0x0041,0x00}, /* LCD Miscellaneous Register */ + {0x0042,0x00}, /* LCD Display Start Address Register 0 */ + {0x0043,0x00}, /* LCD Display Start Address Register 1 */ + {0x0044,0x00}, /* LCD Display Start Address Register 2 */ + {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ + {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ + {0x0048,0x00}, /* LCD Pixel Panning Register */ + {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ + {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ + {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ + {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ + {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ + {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ + {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ + {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ + {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ + {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ + {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ + {0x005B,0x10}, /* TV Output Control Register */ + {0x0060,0x05}, /* CRT/TV Display Mode Register */ + {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ + {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ + {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ + {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ + {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ + {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ + {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ + {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ + {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ + {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ + {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ + {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ + {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ + {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ + {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ + {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ + {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ + {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ + {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ + {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ + {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ + {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ + {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ + {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ + {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ + {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ + {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ + {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ + {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ + {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ + {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ + {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ + {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ + {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ + {0x0100,0x00}, /* BitBlt Control Register 0 */ + {0x0101,0x00}, /* BitBlt Control Register 1 */ + {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ + {0x0103,0x00}, /* BitBlt Operation Register */ + {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ + {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ + {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ + {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ + {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ + {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ + {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ + {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ + {0x0110,0x00}, /* BitBlt Width Register 0 */ + {0x0111,0x00}, /* BitBlt Width Register 1 */ + {0x0112,0x00}, /* BitBlt Height Register 0 */ + {0x0113,0x00}, /* BitBlt Height Register 1 */ + {0x0114,0x00}, /* BitBlt Background Color Register 0 */ + {0x0115,0x00}, /* BitBlt Background Color Register 1 */ + {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ + {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ + {0x01E0,0x00}, /* Look-Up Table Mode Register */ + {0x01E2,0x00}, /* Look-Up Table Address Register */ + {0x01F0,0x10}, /* Power Save Configuration Register */ + {0x01F1,0x00}, /* Power Save Status Register */ + {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ + {0x01FC,0x01}, /* Display Mode Register */ +}; + diff --git a/board/esd/common/s1d13806_640_480_8bpp.h b/board/esd/common/s1d13806_640_480_8bpp.h new file mode 100644 index 0000000000..dd0cc0994f --- /dev/null +++ b/board/esd/common/s1d13806_640_480_8bpp.h @@ -0,0 +1,126 @@ +/* + * + * File generated by S1D13806CFG.EXE + * + * Copyright (c) 2000,2001 Epson Research and Development, Inc. + * All rights reserved. + * + * PLEASE NOTE: If you FTP this file to a non-Windows platform, make + * sure you transfer this file using ASCII, not BINARY mode. + * + * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz) + * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz) + * + */ + +static S1D_REGS regs_13806_640_320_16bpp[] = +{ + {0x0001,0x00}, /* Miscellaneous Register */ + {0x01FC,0x00}, /* Display Mode Register */ + {0x0004,0x18}, /* General IO Pins Configuration Register 0 */ + {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ + {0x0008,0x18}, /* General IO Pins Control Register 0 */ + {0x0009,0x00}, /* General IO Pins Control Register 1 */ + {0x0010,0x00}, /* Memory Clock Configuration Register */ + {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */ + {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ + {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ + {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ + {0x0021,0x03}, /* DRAM Refresh Rate Register */ + {0x002A,0x00}, /* DRAM Timings Control Register 0 */ + {0x002B,0x01}, /* DRAM Timings Control Register 1 */ + {0x0020,0x80}, /* Memory Configuration Register */ + {0x0030,0x25}, /* Panel Type Register */ + {0x0031,0x00}, /* MOD Rate Register */ + {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ + {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ + {0x0035,0x00}, /* TFT FPLINE Start Position Register */ + {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ + {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ + {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ + {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */ + {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ + {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ + {0x0040,0x03}, /* LCD Display Mode Register (8bpp) */ + {0x0041,0x00}, /* LCD Miscellaneous Register */ + {0x0042,0x00}, /* LCD Display Start Address Register 0 */ + {0x0043,0x00}, /* LCD Display Start Address Register 1 */ + {0x0044,0x00}, /* LCD Display Start Address Register 2 */ + {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ + {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ + {0x0048,0x00}, /* LCD Pixel Panning Register */ + {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ + {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ + {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ + {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ + {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ + {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ + {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ + {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ + {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ + {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ + {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ + {0x005B,0x10}, /* TV Output Control Register */ + {0x0060,0x05}, /* CRT/TV Display Mode Register */ + {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ + {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ + {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ + {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ + {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ + {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ + {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ + {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ + {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ + {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ + {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ + {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ + {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ + {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ + {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ + {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ + {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ + {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ + {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ + {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ + {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ + {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ + {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ + {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ + {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ + {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ + {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ + {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ + {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ + {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ + {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ + {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ + {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ + {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ + {0x0100,0x00}, /* BitBlt Control Register 0 */ + {0x0101,0x00}, /* BitBlt Control Register 1 */ + {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ + {0x0103,0x00}, /* BitBlt Operation Register */ + {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ + {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ + {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ + {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ + {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ + {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ + {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ + {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ + {0x0110,0x00}, /* BitBlt Width Register 0 */ + {0x0111,0x00}, /* BitBlt Width Register 1 */ + {0x0112,0x00}, /* BitBlt Height Register 0 */ + {0x0113,0x00}, /* BitBlt Height Register 1 */ + {0x0114,0x00}, /* BitBlt Background Color Register 0 */ + {0x0115,0x00}, /* BitBlt Background Color Register 1 */ + {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ + {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ + {0x01E0,0x00}, /* Look-Up Table Mode Register */ + {0x01E2,0x00}, /* Look-Up Table Address Register */ + {0x01F0,0x10}, /* Power Save Configuration Register */ + {0x01F1,0x00}, /* Power Save Status Register */ + {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ + {0x01FC,0x01}, /* Display Mode Register */ +}; +