From: Fabio Estevam Date: Tue, 5 Nov 2019 12:47:52 +0000 (-0300) Subject: mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0619af09424b58ca2f3ff2f03f5ccff9405650fa;p=u-boot.git mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions The LDOVL definitions is common to all the modes, not only RUN mode, so in order to avoid confusion, remove the _RUN notation from the PMC1 LDOVL definitions. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index fd40af7305..8345b01398 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -19,10 +19,10 @@ #define PMC1_RUN 0x8 #define PMC1_STOP 0x10 #define PMC1_VLPS 0x14 -#define PMC1_RUN_LDOVL_SHIFT 16 -#define PMC1_RUN_LDOVL_MASK (0x3f << PMC1_RUN_LDOVL_SHIFT) -#define PMC1_RUN_LDOVL_900 0x1e -#define PMC1_RUN_LDOVL_950 0x23 +#define PMC1_LDOVL_SHIFT 16 +#define PMC1_LDOVL_MASK (0x3f << PMC1_LDOVL_SHIFT) +#define PMC1_LDOVL_900 0x1e +#define PMC1_LDOVL_950 0x23 #define PMC1_STATUS 0x20 #define PMC1_STATUS_LDOVLF BIT(8) @@ -127,8 +127,8 @@ static void init_ldo_mode(void) /* Set LDOVL to 0.95V in PMC1_RUN */ reg = readl(PMC1_BASE_ADDR + PMC1_RUN); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_RUN, reg); /* Wait for LDOVLF to be cleared */ @@ -138,14 +138,14 @@ static void init_ldo_mode(void) /* Set LDOVL to 0.95V in PMC1_STOP */ reg = readl(PMC1_BASE_ADDR + PMC1_STOP); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_STOP, reg); /* Set LDOVL to 0.90V in PMC1_VLPS */ reg = readl(PMC1_BASE_ADDR + PMC1_VLPS); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_900 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_900 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_VLPS, reg); /* Set LDOEN bit */