From: Philipp Tomsich Date: Tue, 4 Jul 2017 12:50:11 +0000 (+0200) Subject: rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=05c57e12d17b0a601b9a136ff03dac5b538c0845;p=u-boot.git rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ On he RK3368, we need to temporarily disable security on the DMA engines during TPL and SPL to allow the MMC host to DMA into DRAM. To do so, we need to reset the two DMA engines, which in turn requires the DMA1_SRST_REQ and DMA2_SRST_REQ constants to refer to the appropriate bits in the CRU. As the ATF correctly initialises security (and only leaves EL3 after doing so), this can not pose a security issue. Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass --- diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h index 24a9cc0525..bf09e2fa68 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h @@ -102,6 +102,10 @@ enum { /* SOFTRST1_CON */ MCU_PO_SRST_MASK = BIT(13), MCU_SYS_SRST_MASK = BIT(12), + DMA1_SRST_REQ = BIT(2), + + /* SOFTRST4_CON */ + DMA2_SRST_REQ = BIT(0), /* GLB_RST_CON */ PMU_GLB_SRST_CTRL_SHIFT = 2,