From: mario.six@gdsys.cc <mario.six@gdsys.cc>
Date: Thu, 21 Jul 2016 09:57:05 +0000 (+0200)
Subject: i2c: mvtwsi: Get rid of status parameter
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=059fce9f61fd81ab67555b9ba87e12cc4b8db8f6;p=u-boot.git

i2c: mvtwsi: Get rid of status parameter

The twsi_stop function contains a parameter "status," which is used to
pass in the current exit status of the function calling twsi_stop, and
either return this status unchanged if it indicates an error, or return
twsi_stop's exit status if it does not indicate an error.

While not massively complicated, this adds another purpose to the
twsi_stop function, which should have the sole purpose of asserting a
STOP condition on the bus (and not manage the exit status of its
caller).

Therefore, we move the exit status management into the caller functions
by introducing a "stop_status" variable and returning either the status
before the twsi_stop call (kept in the "status" variable), or the status
from the twsi_stop call, depending on which indicates an error.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
---

diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index 4a34eab155..d0e3c3f499 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -290,10 +290,11 @@ static int twsi_recv(struct i2c_adapter *adap, u8 *byte, int ack_flag)
  * Assert the STOP condition.
  * This is also used to force the bus back to idle (SDA = SCL = 1).
  */
-static int twsi_stop(struct i2c_adapter *adap, int status)
+static int twsi_stop(struct i2c_adapter *adap)
 {
 	struct mvtwsi_registers *twsi = twsi_get_base(adap);
 	int control, stop_status;
+	int status = 0;
 	int timeout = 1000;
 
 	/* Assert STOP */
@@ -308,10 +309,8 @@ static int twsi_stop(struct i2c_adapter *adap, int status)
 	} while (timeout--);
 	control = readl(&twsi->control);
 	if (stop_status != MVTWSI_STATUS_IDLE)
-		if (status == 0)
-			status = mvtwsi_error(
-				MVTWSI_ERROR_TIMEOUT,
-				control, status, MVTWSI_STATUS_IDLE);
+		status = mvtwsi_error(MVTWSI_ERROR_TIMEOUT,
+				      control, status, MVTWSI_STATUS_IDLE);
 	return status;
 }
 
@@ -379,7 +378,7 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 	writel(slaveadd, &twsi->slave_address);
 	writel(0, &twsi->xtnd_slave_addr);
 	/* Assert STOP, but don't care for the result */
-	(void) twsi_stop(adap, 0);
+	(void) twsi_stop(adap);
 }
 
 /*
@@ -420,7 +419,7 @@ static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip)
 	if (status == 0)
 		status = twsi_recv(adap, &dummy_byte, MVTWSI_READ_NAK);
 	/* Stop transaction */
-	twsi_stop(adap, 0);
+	twsi_stop(adap);
 	/* Return 0, or the status of the first failure */
 	return status;
 }
@@ -436,7 +435,8 @@ static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip)
 static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
 			int alen, uchar *data, int length)
 {
-	int status;
+	int status = 0;
+	int stop_status;
 
 	/* Begin i2c write to send the address bytes */
 	status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1));
@@ -455,9 +455,9 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
 				   length > 0 ?
 				   MVTWSI_READ_ACK : MVTWSI_READ_NAK);
 	/* Stop transaction */
-	status = twsi_stop(adap, status);
+	stop_status = twsi_stop(adap);
 	/* Return 0, or the status of the first failure */
-	return status;
+	return status != 0 ? status : stop_status;
 }
 
 /*
@@ -466,7 +466,7 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
 static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
 			int alen, uchar *data, int length)
 {
-	int status;
+	int status, stop_status;
 
 	/* Begin i2c write to send first the address bytes, then the
 	 * data bytes */
@@ -479,9 +479,9 @@ static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
 	while ((status == 0) && (length-- > 0))
 		status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK);
 	/* Stop transaction */
-	status = twsi_stop(adap, status);
+	stop_status = twsi_stop(adap);
 	/* Return 0, or the status of the first failure */
-	return status;
+	return status != 0 ? status : stop_status;
 }
 
 #ifdef CONFIG_I2C_MVTWSI_BASE0