From: Jonas Karlman <jonas@kwiboo.se>
Date: Wed, 1 May 2024 16:22:28 +0000 (+0000)
Subject: rockchip: rk3399-evb: Sync DT from v6.8 and update defconfig
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=055061dc35c55a7b1af4cd48b05d6f026fa5cc69;p=u-boot.git

rockchip: rk3399-evb: Sync DT from v6.8 and update defconfig

Sync rk3399-evb device tree from Linux kernel v6.8.

Drop bootph prop for i2c0 and rk808 node, PMIC support is not included
in TPL/SPL and PMIC regulators are working fine in U-Boot proper.

Change to use sdmmc_cd pinconf and drop cd-gpios for card detect pin.

Change to SPL_MAX_SIZE=0x40000, SPL can be up to 256 KiB.

Remove CONFIG_NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on
cpuid read from eFUSE.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3399-evb-u-boot.dtsi b/arch/arm/dts/rk3399-evb-u-boot.dtsi
index 6dedfeec07..3fa5fc0c9d 100644
--- a/arch/arm/dts/rk3399-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-evb-u-boot.dtsi
@@ -12,23 +12,14 @@
 	};
 };
 
-&i2c0 {
-	bootph-all;
-};
-
-&rk808 {
-	bootph-all;
-};
-
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index 7b717ebec8..55eca7a50a 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
@@ -55,7 +56,7 @@
 	};
 
 	edp_panel: edp-panel {
-		compatible ="lg,lp079qx1-sp0v";
+		compatible = "lg,lp079qx1-sp0v";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		power-supply = <&vcc3v3_s0>;
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index afb7998746..334259f73e 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -15,7 +15,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -30,7 +30,6 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MMC_HS400_SUPPORT=y
@@ -39,6 +38,8 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
@@ -69,5 +70,4 @@ CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_VIDEO_ROCKCHIP_MAX_YRES=1200
 CONFIG_DISPLAY_ROCKCHIP_MIPI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y