From: Alex Kiernan Date: Fri, 16 Feb 2018 15:50:41 +0000 (+0000) Subject: Convert CONFIG_BOOTCOUNT_ENV to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=04c96ed2a6820ba2aee978826f96d464386b8cab;p=u-boot.git Convert CONFIG_BOOTCOUNT_ENV to Kconfig This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV Signed-off-by: Alex Kiernan Reviewed-by: Lukasz Majewski --- diff --git a/README b/README index b227d8e907..4478bad6ef 100644 --- a/README +++ b/README @@ -713,17 +713,6 @@ The following options need to be configured: as a convenience, when switching between booting from RAM and NFS. -- Bootcount: - CONFIG_BOOTCOUNT_ENV - If no softreset save registers are found on the hardware - "bootcount" is stored in the environment. To prevent a - saveenv on all reboots, the environment variable - "upgrade_available" is used. If "upgrade_available" is - 0, "bootcount" is always 0, if "upgrade_available" is - 1 "bootcount" is incremented in the environment. - So the Userspace Applikation must set the "upgrade_available" - and "bootcount" variable to 0, if a boot was successfully. - - Pre-Boot Commands: CONFIG_PREBOOT diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 05b1b9e63c..985e662929 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -56,6 +56,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index a9234ee8dd..dd862bb965 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -56,6 +56,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index e689d0f1cc..98edb8828c 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -59,6 +59,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 93e909cd20..e561edccf8 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -56,6 +56,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 9c879a96ab..e09f4c54e3 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -60,6 +60,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 197abde03f..eb7e2850ff 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -56,6 +56,7 @@ CONFIG_BOOTP_DNS=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index e905295d45..40a07555af 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -28,6 +28,18 @@ config BOOTCOUNT_AM33XX This requires the RTC clocks, etc, to be enabled prior to use and not all boards with this IP block on it will have the RTC in use. +config BOOTCOUNT_ENV + bool "Boot counter in environment" + help + If no softreset save registers are found on the hardware + "bootcount" is stored in the environment. To prevent a + saveenv on all reboots, the environment variable + "upgrade_available" is used. If "upgrade_available" is + 0, "bootcount" is always 0, if "upgrade_available" is + 1 "bootcount" is incremented in the environment. + So the Userspace Application must set the "upgrade_available" + and "bootcount" variable to 0, if a boot was successfully. + endchoice config SYS_BOOTCOUNT_SINGLEWORD diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 15dfeec98c..0e77ccb466 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -490,6 +490,4 @@ #define CONFIG_RESET_TO_RETRY #define CONFIG_BOOT_RETRY_TIME 60 -#define CONFIG_BOOTCOUNT_ENV - #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 58a74e0e9d..80a38763fa 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -146,7 +146,6 @@ CONFIG_BOARD_TYPES CONFIG_BOOGER CONFIG_BOOTBLOCK CONFIG_BOOTCOUNT_ALEN -CONFIG_BOOTCOUNT_ENV CONFIG_BOOTCOUNT_I2C CONFIG_BOOTCOUNT_RAM CONFIG_BOOTFILE