From: Dirk Behme <dirk.behme@de.bosch.com>
Date: Mon, 15 Jul 2013 13:58:27 +0000 (+0200)
Subject: mxc_gpio: Correct the GPIO handling in gpio_direction_output()
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=04c79cbd5f8f773aa7823feec6e77862e7e6426f;p=u-boot.git

mxc_gpio: Correct the GPIO handling in gpio_direction_output()

Setting the direction and an output value should be done by

First, set the desired output value.

Then, switch to output.

If this is done in the inverse order, like at the moment,
there can be a glitch on the GPIO line while switching first
the old output value and aftwards the new one.

Fix this by inverting the order of the direction/set_value
calls.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
---

diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index a3880641f0..1d820d4c3e 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -143,10 +143,10 @@ int gpio_direction_input(unsigned gpio)
 
 int gpio_direction_output(unsigned gpio, int value)
 {
-	int ret = mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT);
+	int ret = gpio_set_value(gpio, value);
 
 	if (ret < 0)
 		return ret;
 
-	return gpio_set_value(gpio, value);
+	return mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT);
 }