From: Olliver Schinagl Date: Wed, 21 Nov 2018 18:05:27 +0000 (+0200) Subject: power: axp209: Use BIT() macro X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=048447ce4a365d7ab24fba0900f192fc7166975d;p=u-boot.git power: axp209: Use BIT() macro Use the standard BIT() macro for bitfield definitions in headers. Signed-off-by: Olliver Schinagl Signed-off-by: Priit Laes Acked-by: Maxime Ripard --- diff --git a/include/axp209.h b/include/axp209.h index b7de6ed73c..3a4fc28196 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -3,6 +3,8 @@ * (C) Copyright 2012 Henrik Nordstrom */ +#include + enum axp209_reg { AXP209_POWER_STATUS = 0x00, AXP209_CHIP_VERSION = 0x03, @@ -20,29 +22,29 @@ enum axp209_reg { AXP209_SHUTDOWN = 0x32, }; -#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) -#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4) +#define AXP209_POWER_STATUS_ON_BY_DC BIT(0) +#define AXP209_POWER_STATUS_VBUS_USABLE BIT(4) -#define AXP209_OUTPUT_CTRL_EXTEN (1 << 0) -#define AXP209_OUTPUT_CTRL_DCDC3 (1 << 1) -#define AXP209_OUTPUT_CTRL_LDO2 (1 << 2) -#define AXP209_OUTPUT_CTRL_LDO4 (1 << 3) -#define AXP209_OUTPUT_CTRL_DCDC2 (1 << 4) -#define AXP209_OUTPUT_CTRL_LDO3 (1 << 6) +#define AXP209_OUTPUT_CTRL_EXTEN BIT(0) +#define AXP209_OUTPUT_CTRL_DCDC3 BIT(1) +#define AXP209_OUTPUT_CTRL_LDO2 BIT(2) +#define AXP209_OUTPUT_CTRL_LDO4 BIT(3) +#define AXP209_OUTPUT_CTRL_DCDC2 BIT(4) +#define AXP209_OUTPUT_CTRL_LDO3 BIT(6) -#define AXP209_IRQ5_PEK_UP (1 << 6) -#define AXP209_IRQ5_PEK_DOWN (1 << 5) +#define AXP209_IRQ5_PEK_UP BIT(6) +#define AXP209_IRQ5_PEK_DOWN BIT(5) -#define AXP209_POWEROFF (1 << 7) +#define AXP209_POWEROFF BIT(7) /* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 -#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_GPIO0_CTRL 0x90 #define AXP_GPIO1_CTRL 0x92 #define AXP_GPIO2_CTRL 0x93 -#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ -#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ -#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x94 -#define AXP_GPIO_STATE_OFFSET 4 +#define AXP_GPIO_STATE_OFFSET 4