From: Sean Anderson Date: Tue, 15 Sep 2020 14:45:15 +0000 (-0400) Subject: usb: dwc2: Fix not calling dev_xxx with a device X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=046ade8103b904b75096b8c2af10266af0468be8;p=u-boot.git usb: dwc2: Fix not calling dev_xxx with a device This adds a dev argument to some functions so dev_xxx always has a device to log with. In one instance we must use use a different log function when we are compiled without DM_USB. Signed-off-by: Sean Anderson Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay Tested-by: Patrick Delaunay --- diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index cefe9d83b1..f1d13b1c1d 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -114,7 +114,8 @@ static void init_fslspclksel(struct dwc2_core_regs *regs) * @param regs Programming view of DWC_otg controller. * @param num Tx FIFO to flush. */ -static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) +static void dwc_otg_flush_tx_fifo(struct udevice *dev, + struct dwc2_core_regs *regs, const int num) { int ret; @@ -134,7 +135,8 @@ static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) * * @param regs Programming view of DWC_otg controller. */ -static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) +static void dwc_otg_flush_rx_fifo(struct udevice *dev, + struct dwc2_core_regs *regs) { int ret; @@ -152,7 +154,8 @@ static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) * Do core a soft reset of the core. Be careful with this because it * resets all the internal state machines of the core. */ -static void dwc_otg_core_reset(struct dwc2_core_regs *regs) +static void dwc_otg_core_reset(struct udevice *dev, + struct dwc2_core_regs *regs) { int ret; @@ -284,8 +287,8 @@ static void dwc_otg_core_host_init(struct udevice *dev, clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); /* Make sure the FIFOs are flushed. */ - dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */ - dwc_otg_flush_rx_fifo(regs); + dwc_otg_flush_tx_fifo(dev, regs, 0x10); /* All Tx FIFOs */ + dwc_otg_flush_rx_fifo(dev, regs); /* Flush out any leftover queued requests. */ num_channels = readl(®s->ghwcfg2); @@ -306,7 +309,7 @@ static void dwc_otg_core_host_init(struct udevice *dev, ret = wait_for_bit_le32(®s->hc_regs[i].hcchar, DWC2_HCCHAR_CHEN, false, 1000, false); if (ret) - dev_info("%s: Timeout!\n", __func__); + dev_info(dev, "%s: Timeout!\n", __func__); } /* Turn on the vbus power. */ @@ -330,8 +333,9 @@ static void dwc_otg_core_host_init(struct udevice *dev, * * @param regs Programming view of the DWC_otg controller */ -static void dwc_otg_core_init(struct dwc2_priv *priv) +static void dwc_otg_core_init(struct udevice *dev) { + struct dwc2_priv *priv = dev_get_priv(dev); struct dwc2_core_regs *regs = priv->regs; uint32_t ahbcfg = 0; uint32_t usbcfg = 0; @@ -360,7 +364,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) writel(usbcfg, ®s->gusbcfg); /* Reset the Controller */ - dwc_otg_core_reset(regs); + dwc_otg_core_reset(dev, regs); /* * This programming sequence needs to happen in FS mode before @@ -372,7 +376,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); /* Reset after a PHY select */ - dwc_otg_core_reset(regs); + dwc_otg_core_reset(dev, regs); /* * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. @@ -419,7 +423,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) writel(usbcfg, ®s->gusbcfg); /* Reset after setting the PHY parameters */ - dwc_otg_core_reset(regs); + dwc_otg_core_reset(dev, regs); #endif usbcfg = readl(®s->gusbcfg); @@ -1128,7 +1132,12 @@ int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev, timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); for (;;) { if (get_timer(0) > timeout) { - dev_err(dev, "Timeout poll on interrupt endpoint\n"); +#if CONFIG_IS_ENABLED(DM_USB) + dev_err(dev->dev, + "Timeout poll on interrupt endpoint\n"); +#else + log_err("Timeout poll on interrupt endpoint\n"); +#endif return -ETIMEDOUT; } ret = _submit_bulk_msg(priv, dev, pipe, buffer, len); @@ -1194,7 +1203,7 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) priv->ext_vbus = 0; #endif - dwc_otg_core_init(priv); + dwc_otg_core_init(dev); dwc_otg_core_host_init(dev, regs); clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | @@ -1320,12 +1329,10 @@ static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev, static int dwc2_usb_ofdata_to_platdata(struct udevice *dev) { struct dwc2_priv *priv = dev_get_priv(dev); - fdt_addr_t addr; - addr = dev_read_addr(dev); - if (addr == FDT_ADDR_T_NONE) + priv->regs = dev_read_addr_ptr(dev); + if (!priv->regs) return -EINVAL; - priv->regs = (struct dwc2_core_regs *)addr; priv->oc_disable = dev_read_bool(dev, "disable-over-current"); priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable");