From: Simon Glass Date: Thu, 1 Aug 2024 12:47:22 +0000 (-0600) Subject: rockchip: Ensure memory size is available in RK3399 SPL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=0450e91c38d842593d2fcbdd7e1de8070e122efe;p=u-boot.git rockchip: Ensure memory size is available in RK3399 SPL At present gd->ram_size is 0 in SPL, meaning that it is not possible to enable the cache. Correct this by always populating the RAM size correctly. This increases code size by about 500 bytes in SPL, since it must call the rather large rockchip_sdram_size() function. Signed-off-by: Simon Glass Reviewed-by: Quentin Schulz --- diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index ef9a1824b2..58f3745ffa 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -3142,19 +3142,25 @@ static int rk3399_dmc_init(struct udevice *dev) static int rk3399_dmc_probe(struct udevice *dev) { + struct dram_info *priv = dev_get_priv(dev); + #if defined(CONFIG_TPL_BUILD) || \ (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) if (rk3399_dmc_init(dev)) return 0; -#else - struct dram_info *priv = dev_get_priv(dev); - - priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); - debug("%s: pmugrf = %p\n", __func__, priv->pmugrf); - priv->info.base = CFG_SYS_SDRAM_BASE; - priv->info.size = - rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2); #endif + /* + * There is no point in checking the SDRAM size in TPL as it is not + * used, so avoid the code size increment. + */ + if (!IS_ENABLED(CONFIG_TPL_BUILD)) { + priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + debug("%s: pmugrf = %p\n", __func__, priv->pmugrf); + priv->info.base = CFG_SYS_SDRAM_BASE; + priv->info.size = rockchip_sdram_size( + (phys_addr_t)&priv->pmugrf->os_reg2); + } + return 0; }