From: Sumit Garg <sumit.garg@linaro.org>
Date: Mon, 26 Nov 2018 11:20:17 +0000 (+0530)
Subject: qemu-arm: Add persistent environment support
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=03fb0958c9090eb3add089cb9f5a8a5ecb30ddf6;p=u-boot.git

qemu-arm: Add persistent environment support

Currently on qemu-arm platforms environment is kept in RAM. Instead
use pflash device 1 to provide persistent environment support across
device reset.

Also (optionally) provide support for persistent environment across
qemu machine OFF/ON using following instructions:

- Create envstore.img using qemu-img:
    qemu-img create -f raw envstore.img 64M
- Add a pflash drive parameter to the command line:
    -drive if=pflash,format=raw,index=1,file=envstore.img

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---

diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index f4502c9e9f..0f13716c2e 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -29,3 +29,10 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
index acebdc5a4e..b75363e305 100644
--- a/configs/qemu_arm_defconfig
+++ b/configs/qemu_arm_defconfig
@@ -29,3 +29,10 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
diff --git a/doc/README.qemu-arm b/doc/README.qemu-arm
index 260165638a..e67bc13f70 100644
--- a/doc/README.qemu-arm
+++ b/doc/README.qemu-arm
@@ -47,6 +47,12 @@ The minimal QEMU command line to get U-Boot up and running is:
 Note that for some odd reason qemu-system-aarch64 needs to be explicitly
 told to use a 64-bit CPU or it will boot in 32-bit mode.
 
+Additional persistent U-boot environment support can be added as follows:
+- Create envstore.img using qemu-img:
+    qemu-img create -f raw envstore.img 64M
+- Add a pflash drive parameter to the command line:
+    -drive if=pflash,format=raw,index=1,file=envstore.img
+
 Additional peripherals that have been tested to work in both U-Boot and Linux
 can be enabled with the following command line parameters:
 
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index 33dcce0f92..0431a7982d 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -21,7 +21,8 @@
 #define CONFIG_SYS_HZ                       1000
 
 /* Environment options */
-#define CONFIG_ENV_SIZE				SZ_64K
+#define CONFIG_ENV_ADDR			0x4000000
+#define CONFIG_ENV_SIZE			SZ_256K
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(SCSI, scsi, 0) \
@@ -43,4 +44,9 @@
 
 #define CONFIG_SYS_CBSIZE 512
 
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE		0x0
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_MAX_FLASH_SECT	256 /* Sector: 256K, Bank: 64M */
+
 #endif /* __CONFIG_H */