From: Heinrich Schuchardt Date: Thu, 3 Jun 2021 07:52:41 +0000 (+0000) Subject: net: sun8i-emac: fix MDIO frequency X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=02036d90ec10510c8218aad463a332a50c3528c4;p=u-boot.git net: sun8i-emac: fix MDIO frequency Commit 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") leads to network failure on the OrangePi PC. => dhcp sun8i_emac_eth_start: Timeout According to the commit message the change of the MDIO frequency is only required for external PHYs. Fixes: 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") Signed-off-by: Heinrich Schuchardt --- diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 5a1b38bf80..d7553fe163 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) * The EMAC clock is either 200 or 300 MHz, so we need a divider * of 128 to get the MDIO frequency below the required 2.5 MHz. */ - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << MDIO_CMD_MII_CLK_CSR_SHIFT; + if (!priv->use_internal_phy) + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << + MDIO_CMD_MII_CLK_CSR_SHIFT; mii_cmd |= MDIO_CMD_MII_BUSY; @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, * The EMAC clock is either 200 or 300 MHz, so we need a divider * of 128 to get the MDIO frequency below the required 2.5 MHz. */ - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << MDIO_CMD_MII_CLK_CSR_SHIFT; + if (!priv->use_internal_phy) + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << + MDIO_CMD_MII_CLK_CSR_SHIFT; mii_cmd |= MDIO_CMD_MII_WRITE; mii_cmd |= MDIO_CMD_MII_BUSY;