From: Valentin Longchamp Date: Thu, 16 Jun 2011 12:41:15 +0000 (+0530) Subject: arm/km: add support for portl2 board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=01fa4e8cded8c3c610b0ea10ad817a7ca8c72517;p=u-boot.git arm/km: add support for portl2 board This adds support for the keymile Kirkwood BEC portl2 board. This board relies on the km_arm (km_kirkwood) BEC. The egiga driver is configured for a 100M full-duplex, A/N off connnection to the backplane. This board has always ethernet present, because it is connected to the marvell switch similar to mgcoge3un. The reset_phy functionality is also the same to mgcoge3un. Signed-off-by: Valentin Longchamp Signed-off-by: Holger Brunck cc: Prafulla Wadaskar cc: Heiko Schocher --- diff --git a/MAINTAINERS b/MAINTAINERS index 40560b78a2..a664f4dab2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -734,6 +734,7 @@ Sergey Lapin Valentin Longchamp km_kirkwood ARM926EJS (Kirkwood SoC) + portl2 ARM926EJS (Kirkwood SoC) Nishanth Menon diff --git a/MAKEALL b/MAKEALL index 9a2595d17c..4adaeb8538 100755 --- a/MAKEALL +++ b/MAKEALL @@ -364,6 +364,7 @@ LIST_ARM9=" \ openrd_base \ openrd_client \ openrd_ultimate \ + portl2 \ rd6281a \ sbc2410x \ scb9328 \ diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index ed6ede3251..5da856fabc 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -130,10 +130,12 @@ int startup_allowed(void) return 1; return 0; } +#endif +#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2)) /* - * mgcoge3un has always ethernet present. Its connected to the 6061 switch - * and provides ICNev and piggy4 connections. + * These two boards have always ethernet present. Its connected to the mv + * switch. */ int ethernet_present(void) { @@ -335,7 +337,7 @@ void dram_init_banksize(void) } } -#if defined(CONFIG_MGCOGE3UN) +#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2)) #define PHY_LED_SEL 0x18 #define PHY_LED0_LINK (0x5) diff --git a/boards.cfg b/boards.cfg index 6e5e5356da..ec18460bb7 100644 --- a/boards.cfg +++ b/boards.cfg @@ -118,6 +118,7 @@ davinci_sonata arm arm926ejs sonata davinci km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood mgcoge3un arm arm926ejs km_arm keymile kirkwood +portl2 arm arm926ejs km_arm keymile kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE diff --git a/include/configs/portl2.h b/include/configs/portl2.h new file mode 100644 index 0000000000..a8543a534f --- /dev/null +++ b/include/configs/portl2.h @@ -0,0 +1,81 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor + * Prafulla Wadaskar + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com. + * Valentin Longchamp, Keymile AG Bern, valentin.longchamp@keymile.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ + +#ifndef _CONFIG_PORTL2_H +#define _CONFIG_PORTL2_H + +/* include common defines/options for all arm based Keymile boards */ +#include "km/km_arm.h" + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile Port-L2" +#define CONFIG_HOSTNAME portl2 +#define CONFIG_PORTL2 + +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9544a:70:a" /* I2C2 (Mux-Port 2)*/ + +/* + * portl2 has a fixed link to the XMPP backplane + * with 100MB full duplex and autoneg off, for this + * reason we have to change the default settings + */ +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ + MVGBE_SET_GMII_SPEED_TO_10_100 |\ + MVGBE_SET_MII_SPEED_TO_100) + +/* + * portl2 does use the PCIe Port0 + */ +#define CONFIG_KIRKWOOD_PCIE_INIT + +#endif /* _CONFIG_PORTL2_H */