From: Patrice Chotard <patrice.chotard@foss.st.com>
Date: Tue, 30 Aug 2022 14:56:28 +0000 (+0200)
Subject: doc: Add gpio status output fields description
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=00cc81f4e4c3d7e28766a770a09ce888c7ff5bb5;p=u-boot.git

doc: Add gpio status output fields description

Add gpio status output fields description and one output example.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Tweak the formatting.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
---

diff --git a/doc/usage/cmd/gpio.rst b/doc/usage/cmd/gpio.rst
index f6a5668388..ee902138f1 100644
--- a/doc/usage/cmd/gpio.rst
+++ b/doc/usage/cmd/gpio.rst
@@ -45,6 +45,31 @@ gpio status
 
 Display the status of one or multiple GPIOs. By default only claimed GPIOs
 are displayed.
+gpio status command output fields are::
+
+    <name>: <function>: <value> [x] <label>
+
+*function* can take the following values:
+
+output
+    pin configured in gpio output, *value* indicates the pin's level
+
+input
+    pin configured in gpio input, *value* indicates the pin's level
+
+func
+    pin configured in alternate function, followed by *label*
+    which shows pinmuxing label.
+
+unused
+    pin not configured
+
+*[x]* or *[ ]* indicate respectively if the gpio is used or not.
+
+*label* shows the gpio label.
+
+Parameters
+----------
 
 -a
     Display GPIOs irrespective of being claimed.
@@ -77,6 +102,23 @@ Switch the status of a GPIO::
     => echo $myvar
     0
 
+Show the GPIO status::
+
+    => gpio status
+    Bank GPIOA:
+    GPIOA1: func rgmii-0
+    GPIOA2: func rgmii-0
+    GPIOA7: func rgmii-0
+    GPIOA10: output: 0 [x] hdmi-transmitter@39.reset-gpios
+    GPIOA13: output: 1 [x] red.gpios
+
+    Bank GPIOB:
+    GPIOB0: func rgmii-0
+    GPIOB1: func rgmii-0
+    GPIOB2: func uart4-0
+    GPIOB7: input: 0 [x] mmc@58005000.cd-gpios
+    GPIOB11: func rgmii-0
+
 Configuration
 -------------